• 폴리머
• /
• 제38권6호
• /
• pp.735-743
• /
• 2014

폴리프로필렌의 분자량 및 분자량 분포를 예측하기 위해 레오메터, 고유점도측정기 및 MI(melt index) 기기 등을 이용하여 유변 물성을 측정하였고, 분자구조해석에는 GPC가 사용되었다. 기존에 사용되어온 동적진동측정을 이용한 교차 모듈러스에서 결정된 유변학적 PI(다분산 지표)와 변형된 Carreau 모델을 이용하여 계산된 분포 폭 매개변수(distribution broadness parameter)를 분자량 분포와의 관계를 비교해보았다. 유변학적 PI의 경우 이론적 근거가 부족하고, 압출에 의해 재 생성된 폴리프로필렌 시료에 대해서는 분자량 분포와 잘 일치하지만 반응기에서 중합된 시료 즉, 분자량 분포가 넓거나 다른 경우 잘 일치하지 않는다는 보고가 지배적인데 비해 분포 폭 매개변수는 폴리프로필렌의 전단담화의 정도를 직접적으로 측정하는 것으로 분자량 분포를 잘 예측할 수 있음을 알았다.

• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1989

Modified phenolics can have a retarding effect on the gelation of wood oil. Modified phenolic resins can be used in media for paint, varnishes, primers, overprinting varnishes, litho, letterpress and rotogravure inks. Varnishes based on rosin phenolic are faster drying, have better durability, are harder and glosser, and have greater resistance to water than ones based on ester gums. These physical properties is concerned with molecular weight distribution of rosin modified phenol resin. This paper was studied about molecular weight distribution of rosin phenolics which were prepared between $130~250^{\circ}C$. The results were as follows: 1) Average molecular weights inereased with increasing reaction temperature. 2) $M_w/M_n$ were from 3.43 to 46.44 with increasing reaction temperature and so the molecular weight distributions were changed from random distribution to broad distribution. 3) The relation ship between intrinsic viscosity and weight average molecular weight was follows: $[{\;}{\;}]={\;}1{\times}{\;}10^{-6}M_w,{\;}M_w=M_w$ 4) Esterification reaction between the acid group of rosin and polyol was started about $230^{\circ}C$$.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.847-850
• /
• 2007

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.621-625
• /
• 2003

In order to investigate the properties of aqueous fibroin solution, the molecular weight distribution of silk fibroin was determined by gel filtration chromatography. The molecular weights spreaded from 200 kDa to less than 20 kDa. The distribution of molecular weight was significantly affected when the pH of solubilization solution is less than 1. Distributions of fibroin solution stored at various condition were also investigated.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.402-407
• /
• 2014

Herein, we describe the effect of the cooling-off condition of a solution-processed 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-pentacene) film on its molecular distribution and the resultant electrical properties. Since the solvent in a TIPS-pentacene droplet gradually evaporates from the rim to the center exhibiting a radial form of solute, for a quenched case, domains of the TIPS-pentacene film are aboriginally spread showing original features of radial shape due to suppressed molecular rearrangement during the momentary cooling period. For the slowly cooled case, however, TIPS-pentacene molecules are randomly rearranged during the long cooling period. As a result, in the lopsided electrodes structure proposed in this work, the charge transport generates more effectively under the case for radial distribution induced by the quenching technique. It was found that the molecular redistribution during the cooling-period plays an important role on the magnitude of the mobility in a solution-processed organic transistor. This work provides at least a scientific basis between the molecular distribution and electrical properties in solution-processed organic devices.

• Bulletin of the Korean Chemical Society
• /
• 제27권3호
• /
• pp.413-418
• /
• 2006

Sodium hyaluronate (NaHA), water soluble polymer having ultra-high molecular weight, is characterized by using on-line frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) and multiangle light scattering (MALS). This study demonstrates the capability of power programming FI-AFlFFF for the separation of NaHA and the applicability of FI-AFlFFF with MALS for the characterization of molecular weight distribution and their structural information. Since sample injection and relaxation in FI-AFlFFF are achieved by using hydrodynamic relaxation, separation of high molecular weight polymers can be achieved smoothly without halting the separation flow. Experiments are carried out with the two different NaHA products (a raw NaHA sample and a thermally degraded NaHA product) and molecular weight distribution and conformations in solution are determined. Influence of sample filtration on the change of molecular weight distribution is also discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.441-450
• /
• 2004

The velocity distribution of gas molecules from the experimental results was confirmed as the same with the Maxwell-Boltzmann's theoretical results within the experimental error. This study is on the realization of the Maxwell-Boltzmann's velocity distribution of gas molecules by the molecular dynamics(MD) method. The Maxwell-Boltzmann's velocity distribution of gas molecules is extremely important to confirm the equilibrium state because the properties of a thermodynamic system shall be obtained from the system's equilibrium configuration in the MD method. This study is the first trial in the successive researches to calculate the properties of a thermodynamic system by the computer simulations. We confirmed that the maxwell-boltzmann's velocity distribution is developed in some transient time after starting a simulation and dependent on the size of a system. Also it is found that the velocity distribution has no relation with an initial configuration of gas molecules.

• BMB Reports
• /
• 제42권6호
• /
• pp.361-366
• /
• 2009

It was reported that high doses of sodium selenite can induce apoptosis of cancer cells, but the molecular mechanisms are poorly understood. Manganese superoxide dismutase (MnSOD) converts superoxide radical to hydrogen peroxide within the mitochondrial matrix and is one of the most important antioxidant enzymes. In this study, we showed that 20 ${\mu}M$ sodium selenite could alter subcellular distribution of MnSOD, namely a decrease in mitochondria and an increase in cytosol. The alteration of subcellular distribution of MnSOD is dependent on the production of superoxide induced by sodium selenite.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.141-155
• /
• 2000

To examine how the difference of molecular weight distribution of cellulase influenced the beating process according to surface pore size of the fiber, high molecular weight enzyme and low one were applied to soft wood pulp, hard wood pulp, cotton linter pulp. Some enzymes with the distribution of low molecular weight penetrated into cellulose in the proportion of surface pore size and the results were negative as like : the low viscosity, decrease of refining Yield, decrease of fine fibers content and so on. But in cotton linter pulp in the small surface area, the fiber softness was increased and it had a positive result that the paper intensity was high. Other enzymes with the distribution of high molecular weight had an enzyme reaction on the most surfaces of cellulose. They were effective in eliminating the fuzz of hydrophile fine fibers and the freeness was increased.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.805-813
• /
• 2013

In this study, molecular size distribution of natural organic matter (NOM) after ozonation was measured and its effect on adsorption capacity of activated carbon was investigated. According to the results, the molecular size of NOM was limitedly changed. Specifically, the molecular size of NOM between 5,000 to 10,000 Da were slightly decreased with increasing ozone doses. The adsorption capacity after ozonation was evaluated using Freundlich isotherm with ideal adsorbed solution theory (IAST) which simulated the multi components adsorption. Further, mini-column test was conducted. The Freundlich constant, K was reduced after ozonation and the non-adsorbable fraction was increased with ozonation. However, no correlation between K and ozone doses was found. The present study also agreed with the correlation between adsorption capacity and pore size characteristics of activated carbon.