• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.261-271
• /
• 2000

Physical properties of NR vulcanizates cured by both sulfur and resole were studied. Cure characteristics of the compounds were also investigated. Two types of resoles with different molecular weight distributions were employed. The scorch time of the NR compound containing the resole with a low molecular weight distribution was shorter than that of the compound containing the resole with a high one. Crosslink densities of the NR vulcanizates with a high resole content after the thermal aging at $95^{\circ}C$ decreased, while that of the vulcanizate without resole after the thermal aging at $95^{\circ}C$ increased. Though crosslink densities of the NR vulcanizates with a high resole content decreased with increasing the aging time, the moduli increased while the tensile strength and tear strength decreased.

• KSBB Journal
• /
• v.9 no.1
• /
• pp.1-7
• /
• 1994

A qualitative study was made on the mechanism of dextran synthesis by dextransucrase. Enzymatic synthesis of dextran was experimentally studied with initial sucrose concentration from 50g/$\ell$ to 150g/$\ell$. The molecular weight distribution of synthesized dextran was measured by using on-line gel Permeation chromatographic system Sucrose was observed not to work as a primer within the range of concentration tested. At the initial sucrose concentration of 50g/$\ell$, dextran with molecular weight of medium range ($10^4-2{\times}10^6$) was synthesized due to the mass transfer limitation of sucrose. The amount of the dextran of medium range decreased with the initial sucrose concentration. Dextran was likely to be synthesized by radical chain polymerization mechanism since the dextran of medium range was not produced at higher sucrose concentrations.

• Journal of Ecology and Environment
• /
• v.29 no.2
• /
• pp.175-183
• /
• 2006

The discovery of deep-sea hydrothermal vents and their ecosystems is a monumental landmark in the history of Ocean Sciences. Deep-sea hydrothermal vents are scattered along the global mid-ocean ridges and back-arc basins. Under sea volcanic phenomena related to underlying magma activities along mid-ocean ridges generate extreme habitats for highly specialized communities of animals. Multidisciplinary research efforts during past three decades since the first discovery of hydrothermal vents along the Galapagos Rift in 1977 revealed fundamental components of physiology, ecology, and evolution of specialized vent communities of micro and macro fauna. Heterogeneous regional geological settings and tectonic plate history have been considered as important geophysical and evolutionary factors for current patterns of taxonomic composition and distribution of vent faunas among venting sites in the World Ocean basins. It was found that these communities are based on primary production of chemosynthetic bacteria which directly utilize reduced compounds, mostly $H_2S$ and $CH_4$, mixed in vent fluids. Symbioses between these bacteria and their hosts, vent invertebrates, are foundation of the vent ecosystem. Gene flow and population genetic studies in parallel with larval biology began to unveil hidden dispersal barrier under deep sea as well as various dispersal characteristics cross taxa. Comparative molecular phylogenetics of vent animals revealed that vent faunas are closely related to those of cold-water seeps in general. In perspective additional interesting discoveries are anticipated particularly with further refined and expanded studies aided by new instrumental technologies.

• BMB Reports
• /
• v.36 no.2
• /
• pp.154-158
• /
• 2003

Collagen is a family of proteins which consists of several genetically distinct molecular species and is intimately involved in tissue organization, function, differentiation and development. The purpose of this study was to investigate the concentration of different hydroxyproline (Hyp) fractions viz., total, free, peptide-bound, protein-bound, soluble- and insoluble-collagen hydroxyproline (Hyp) in various bovine tissues. Results showed that liver had the highest concentration of free Hyp followed by kidney, brain, spleen, lungs, muscle and heart. Liver also had the highest concentration of peptide-bound collagen Hyp followed by kidney, heart, spleen, lungs, brain and muscle. The concentration of protein-bound collagen Hyp was highest in the liver, followed by kidney, spleen, lungs, muscle, brain and heart. Total Hyp was highest in the liver, followed by kidney, spleen, brain, heart, muscle and lungs. Liver also had significantly high concentration of collagen as compared to other tissues examined (P<0.001). Spleen had the significantly higher concentration of soluble-collagen Hyp when compared to other tissues (P<0.001). This was followed by heart, muscle, lungs, brain, kidney and liver. Heart had the highest concentration of insoluble-collagen Hyp followed by lungs, kidney, liver, muscle, spleen and brain. The variation among the insoluble-collagen Hyp concentration of heart and muscle, spleen and brain was significant (P<0.001). We speculate that these differences could be due to the variation in turn over of rate of collagen metabolism in this species.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1487-1494
• /
• 1990

In this paper the dynamic characteristics of self acting air lubricated slider bearing of hard disk/head system are investigated. The dynamic equations of magnetic head mechanism considering both parallel and pitch motion and the time dependent modified Reynolds equation are analyzed and the dynamic pressure distribution of air film is numerically calculated in frequency domain by small perturbation method and finite difference scheme with variable grid. The dynamic response of the slider spacing is obtained accordingly as the moving recording surface vibrates in parallel mode.

• ALGAE
• /
• v.31 no.4
• /
• pp.303-315
• /
• 2016

Compsopogon specimens collected in China were examined based on morphology and DNA sequences. Five molecular markers from different genome compartments including rbcL, COI, 18S rDNA, psbA, and UPA were identified and used to construct a phylogenetic relationship. Phylogenetic analyses indicated that two different morphological types from China clustered into an independent clade with Compsopogon specimens when compared to other global samples. The Compsopogon clade exhibited robust support values, revealing the affiliation of the samples to Compsopogon caeruleus. Although the samples were distributed in a close geographical area, unexpected sequence divergences between the Chinese samples implied that they were introduced by different dispersal events and from varied origins. It was speculated that Compsopogon originated in North America, a portion of the Laurentia landmass situated in the Rodinia supercontinent at approximately 573.89-1,701.50 million years ago during the Proterozoic era.Although Compsopogonhad evolved for a rather long time, genetic conservation had limited its variability and rate of evolution, resulting in the current monospecific global distribution. Additional global specimens and sequence information were required to increase our understanding of the evolutionary history of this ancient red algal lineage.

• Korea-Australia Rheology Journal
• /
• v.11 no.4
• /
• pp.305-311
• /
• 1999

The shear behavior of polymers obtained by means of devices such as capillary and cone-and-plate rheo-meters is commonly used to assess their processing performance and as a characterization tool. However, the number of instances when two polymers have the same shear properties but perform differently during certain types of processing operations (e.g. film blowing and sheet extrusion) indicate that shear properties alone may not be sufficient to characterize polymeric fluids. We begin by defining the kinematics of shear-free or extensional flow and the associated material functions. The extensional and shear behavior of three different types of polyethylene (PE) are then compared to illustrate the points that one cannot ascertain the extensional properties of polymer melts from their shear properties and, furthermore, there may not be a simple relation between properties obtained from one type of extensional flow and those of another type. The kinematics of most processing flows are extensional rather than shear in nature, and , hence, the performance of polymers during processes such as fiber spinning, film casting, film blowing, thermoforming, blow molding, and even extrusion is more readily accounted for through extensional viscosity measurements. Methods for carrying out extensional flow measurements are then reviewed including approximate methods. To illustrate the sensitivity of extensional viscosity measurements to subtle changes in the molecular architecture of PEs, results are presented for samples with a narrow molecular weight distribution but with varying numbers of long chain branches. Finally, constitutive equations which allow one to separate shear and extensional flow behavior are discussed as any attempts to simulate the subtle processing differences between two polymers will require constitutive equations of this nature.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.163-167
• /
• 2006

Pectin was enzymatically extracted from industrial lemon pomace by using an endo-polygalacturonase from Aspergillus niger as a processing aid and compared to pectin extraction by hot hydrochloric acid. The yield of pectin was 17.6 and 20.2% with enzymatic and acidic treatments, respectively. The molecular weight distribution did not vary greatly between the samples extracted with enzyme or acid. Large differences in charge density were observed, however, when the samples were analyzed by anionic-exchange chromatography. Pectin extracted by the enzymatic treatment indicated higher charge density than that obtained by hydrochloric acid. The higher charge density could due to the presence of endogenous lemon pectinesterase, which was activated at low pH 4.5 in situ conditions during the process of enzymatic extraction, leading to low methoxylated pectin with a higher charge density.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.30-35
• /
• 2012

Novel bio-polybutadiene polymers with controlled molecular weight (MW), MW distribution, chemical composition and micro structure were synthesized by a living anionic polymerization of butadiene and the subsequent coupling reaction of the thus obtained living polybutadiene and a vegetable oil. Anionic polymerization of butadiene was carried out in THF solvent using n-BuLi initiator. The resulting living polybutadienyllithium polymer was then reacted with epoxidized soybean oil (ESO) to obtain a star-polymer of polybutadiene and vegitable oil. Three different bio-elastomers were prepared by coupling living polybutadienes of MWs 1000, 5000 and 1000g/mol with ESO. The molecular structure and MW of the polybutadienes and bioelastomers were characterized by $^1H$-NMR, FTIR and GPC techniques.

• Korean Journal of Veterinary Research
• /
• v.44 no.1
• /
• pp.7-13
• /
• 2004

Severe hypertension (>180 mmHg) develops in spontaneously hypertensive rats (SHR) after 12 wk-old; however, it is not clear whether what kinds of molecular mechanism leads to altered cardiac performance following developmental stages in SHR. Also, although the effect of calcineurin (Cn) to promote cardiomyocyte hypertrophy in vivo and in vitro is established, its overall necessity as a hypertrophic mediator is currently an area of ongoing debate. Thus, we have examined i) body weight and blood pressure, ii) differences of expression and distribution of signaling molecules such as Cn, protein kinase B/Akt (PKB/Akt), and extracellular signal-regulated kinase (ERK) between SHR and their age-matched control Wistar-Kyoto (WKY) rats following developmental stages. In 16 wk-old SHR compared with WKY, 2-dimentional echocardiography showed cardiac enlargement and hypertrophy of left ventricle, significantly. Taken together, we suggest that Cn is associated with hereditary cardiac hypertrophy, the process being related to the molecular signaling mechanisms involving PKB/Akt and ERK.