• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1534-1538
• /
• 2010

Fed-batch cultures of Hansenula polymorpha were studied to develop an efficient biosystem to produce recombinant human serum albumin (HSA). To comply with this purpose, we used a high-purity oxygen-supplying strategy to increase the viable cell density in a bioreactor and enhance the production of target protein. A mutant strain, H. polymorpha GOT7, was utilized in this study as a host strain in both 5-l and 30-l scale fermentors. To supply high-purity oxygen into a bioreactor, nearly 100% high-purity oxygen from a commercial bomb or higher than 93% oxygen available in situ from a pressure swing adsorption (PSA) oxygen generator was employed. Under the optimal fermentation of H. polymorpha with highpurity oxygen, the final cell densities and produced HSA concentrations were 24.6 g/l and 5.1 g/l in the 5-l fermentor, and 24.8 g/l and 4.5 g/l in the 30-l fermentor, respectively. These were about 2-10 times higher than those obtained in air-based fed-batch fermentations. The discrepancies between the 5-l and 30-l fermentors with air supply were presumably due to the higher contribution of surface aeration over submerged aeration in the 5-l fermentor. This study, therefore, proved the positive effect of high-purity oxygen in enhancing viable cell density as well as target recombinant protein production in microbial fermentations.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.609-615
• /
• 1994

Partial oxidation of ethylene over 10wt% $Ag/{\alpha}-Al_2O_3$ catalyst was studied with a pulse reactor which was connected directly to a G. C. When ethylene was injected after oxygen injection at the temperature where molecular adsorption of oxygen is difficult ethylene oxide was evolved. From the results, it is suggested that adsorbed atomic oxygen is related with the evolution of ethylene oxide. The selectivity to ethylene oxide decreased with the decrease of the amounts of adsorbed oxygen and bulk oxygen. Ethylene oxide was either decomposed to ethylene and adsorbed oxygen or isomerized to acetaldehyde. However, the isomerization of ethylene oxide to acetaldehyde was strongly suppressed by the preadsorbed oxygen.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.2
• /
• pp.133-145
• /
• 2017

Palm oil production is among the highest worldwide, and it has been mainly used in the food industry and other commodities. Currently, a lot of palm oil production has been destined for the synthesis of biodiesel; however, its use in applications other than the food industry has been questioned. Thereby for a sustainable development, in this paper the use of palm oil of low quality for corrosion inhibitors synthesis is proposed. The performance of the synthesized inhibitors was evaluated by using electrochemical techniques such as open circuit potential measurements, linear polarization resistance and electrochemical impedance spectroscopy. The results indicate that the fatty amides from palm oil are excellent corrosion inhibitors with protection efficiencies greater than 98%. Fatty amides molecules act as cathodic inhibitors decreasing the anodic dissolution of iron. When fatty amides are added, a rapid decrease in the corrosion rate occurs due to the rapid formation of a molecular film onto carbon steel surface. During the adsorption process of the inhibitor a self-organization of the hydrocarbon chains takes place forming a tightly packed hydrophobic film. These results demonstrate that the use of palm oil for the production of green inhibitors promises to be an excellent alternative for a sustainable use of the palm oil production.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.713-720
• /
• 2000

A polymer/iodine complex film was prepared using syndiotactic poly(vinyl alcohol) (s-PVA) with number-average degree of polymerization of 900 and syndiotactic diad content of 63.1%. In comparison with atactic-PVA/iodine films, degree of polarization of the s-PVA/iodine film was improved up to over 99% although a lower transmittance was obtained. By soaking in iodine/potassium iodide aqueous solution of a lower iodine concentration and subsequent drawing by 4 times, s-PVA/iodine film of a higher transmittance and degree of polarization was produced. The degree of iodine desorption of the s-PVA/iodine film in water were very low. The crystallinity and the d-spacing and crystal size of (100) plane increased at the early stage of soaking time, however, remained constant or decreased slightly with increasing soaking time. In consequence, s-PVA/iodine complex formation took place mainly inside crystal region at the initial stage of soaking time, whereas it occurred outside crystal region or physical adsorption of iodine dominated after sufficient soaking.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.632-639
• /
• 1994

For dye sensitization of zinc oxide in the visible region, copper phthalocyanine(CuPc) and sunfast yellow(SY) were adsorbed in two layers on zinc oxide powder. The adsorption structures of $\alpha-and\beta-CuPc$ on zinc oxide were investigated by photoacoustic, IR and Raman spectra. The ${\alpha}-and\;{\beta}$-polymorphs exhibited dimeric structure or molecular aggregates. The surface photovoltaic effect of ZnO/CuPc/SY showed higher than that of ZnO/SY/CuPc and $ZnO/\beta-CuPc/SY$ indicated better photosensitive than $ZnO/\alpha-CuPc/SY.$ Electrophotographic sensitivity of $ZnO/\beta-CuPc/SY$ was $$S_{1/2}=2.99{\times}10^{-2}(erg/cm^2)^{-1}$ at 630 nm.

• Journal of Microbiology
• /
• v.45 no.5
• /
• pp.409-417
• /
• 2007

Burkholderia sp. HY-10 isolated from the digestive tracts of the longicorn beetle, Prionus insularis, produced an extracellular lipase with a molecular weight of 33.5 kDa estimated by SDS-PAGE. The lipase was purified from the culture supernatant to near electrophoretic homogenity by a one-step adsorption-desorption procedure using a polypropylene matrix followed by a concentration step. The purified lipase exhibited highest activities at pH 8.5 and $60^{\circ}C$. A broad range of lipase substrates, from $C_4\;to\;C_{18}$ p-nitrophenyl esters, were hydrolyzed efficiently by the lipase. The most efficient substrate was p-nitrophenyl caproate ($C_6$). A 2485 bp DNA fragment was isolated by PCR amplification and chromosomal walking which encoded two polypeptides of 364 and 346 amino acids, identified as a lipase and a lipase foldase, respectively. The N-terminal amino acid sequence of the purified lipase and nucleotide sequence analysis predicted that the precursor lipase was proteolytically modified through the secretion step and produced a catalytically active 33.5 kDa protein. The deduced amino acid sequence for the lipase shared extensive similarity with those of the lipase family 1.2 of lipases from other bacteria. The deduced amino acid sequence contained two Cystein residues forming a disulfide bond in the molecule and three, well-conserved amino acid residues, $Ser^{131},\;His^{330},\;and\;Asp^{308}$, which composed the catalytic triad of the enzyme.

• Preventive Nutrition and Food Science
• /
• v.13 no.3
• /
• pp.204-211
• /
• 2008

Fish protein hydrolysates (FPHs) with different degrees of hydrolysis by treatment with alcalase, pronase, flavourzyme and trypsin and isolated peptide were prepared from Hwangtae (yellow dried pollack, Theragra chalcogramma). Hwangtae protein hydrolysate was fractionated according to the molecular weight into six major types of APO1 (1.3 kDa), APO2 (1 kDa), APO3 (<1 kDa), APACE (<1 kDa), APG1 (70 kDa) and APG2 (70 kDa) isolated from the hydrolysate using consecutive chromatographic methods. Soluble peptide were produced from Hwangtae and evaluated for their nutritional and functional properties. Some functional properties of FPHs were assessed and compared with those of egg albumin or the soybean protein. APO2 had the highest nitrogen solubility value (94.2%), emulsion capacity and emulsion stability of the Alaska Pollack peptide ranged from 12.4 to 39.5 (mL of oil per 200 mg of protein) and 44.0% to 77.5%, respectively. Highest and lowest fat adsorption values were observed for APG1 (9.9 mL of oil per gram of protein) and APO3 (3.8 mL of oil per gram of protein), respectively.

• Journal of the Korean Chemical Society
• /
• v.40 no.3
• /
• pp.202-208
• /
• 1996

SAPO-11 was synthesized hydrothermally and dealuminated with $H_4$EDTA. The framework structure of SAPO-11 was maintained safely by 24 hours' dealumination, but further dealumination for 48 hours caused SAPO-11 collapsed and to be changed to variscite($AIPO_4{\cdot}2H_2O$) and tridymite($SiO_2$). Dealuminated SAPO-11 showed two structural hydroxyl bands at 3607 $cm^{-1}$ and 3453 $cm^{-1}$ respectively. The intensities of these two bands increased according to the extent of dealumination, and disappeared by the adsorption of methylamine. Dealuminated SAPO-11 showed higher desorption temperatures and greater activation energies in desorption of water and methylamine compared to non-dealuminated SAPO-11. All the phenomena may be due to the stronger interactions of Bronsted acid sites of structural hydroxyl groups generated by dealumination with adsorbed water and methylamine molecules respectively.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.20-25
• /
• 2002

We performed a basic experiment for rapid, on-line, real-time measurement of HBsAg by using a surface plasmon resonance biosensor to quantify the recognition and interaction of biomolecules. We immobilized the anti-HBsAg polyclonal antibody to the dextran layer on a CM5 chip surface which was pre-activated by N-hydroxysuccinimide for amine coupling. The binding of the HBsAg to the immobilized antibody was measured by the mass increase detected by the change in the SPR signal. The binding characteristics between HBsAg and its antibody followed typical monolayer adsorption isotherm. When the entire immobilized antibody was interacted, there was no additional, non-specific binding observed, which suggested the biointeraction was very specific as expected and independent of the ligand density. No significant steric hindrance was observed at 17.6 nm/$mm^2$ immobilization density. The relationship between the HBsAg concentration in the sample solution and the antigen bound to the chip surface was linear up to ca. $40\mu\textrm{g}$/mL, which is much wider than that of the ELISA method. It appeared the antigen-antibody binding was increased as the immobilized ligand density increased, but verification is warranted. This study showed the potential of this biosensor-based method as a rapid, simple, multi-sample, on-line assay. Once properly validated, it can serve as a more powerful method for HBsAg quantification replacing the current ELISA method.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.691-696
• /
• 2011

CTAB or CTAB-Nafion catalyst were successfully supported on siliceous hollow tubular MCM-41 which synthesized by hydrothermal method using CTAB as a single template or CTAB and Nafion-Na as mixed templates. The properties of two kinds of catalysts were characterized with XRD, SEM and adsorption and desorption isotherms of nitrogen and pore diameter distribution, respectively. Then they were applied to catalyze brominating reaction of 1,7-heptanediol, moreover the rate of brominating reaction with different catalysts was compared. The results showed that catalytic activities of CTAB/MCM-41 and CTAB-Nafion/MCM-41 are better than CTAB, and that of CTAB-Nafion/MCM-41 is the best because of its phase-transfer and strong acidity function. The two kinds of catalysts can be separated from the reactive products and recycled.