• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.46-57
• /
• 2022

In this study, the relationship between fiber orientation and mechanical properties with the injection pressure of polyamide-6/glass fiber composite materials manufactured by the injection molding process was investigated. Also, an actual experimental data and finite element model-based simulation data were analyzed. Specimens were manufactured through the injection molding process setting the injection pressure differently to 700, 800, 900, and 1000 bar, respectively. A morphological analysis and orientation of the PA6/GF composite material were observed using Optical microscope. Through tensile and flexural strength tests, the mechanical properties of the PA6/GF composite materials with the injection pressure were studied. As a result, it was confirmed that the mechanical properties were the superior under the injection pressure of 900 bar molding conditions. In addition, the mechanical properties of the actually manufactured specimen (PA6/GF) and virtual engineering S/W((Digimat, Abaqus) were used to compare and analyze the analysis results for the mechanical properties, and based on the reliable DB, the physical properties of the PA6/GF composite characteristics were studied.

• 소성∙가공
• /
• 제16권2호
• /
• pp.113-119
• /
• 2007

Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat material by means of an electric current that is caused to flow through the material or its container by electromagnetic induction. It has various applications such as heat treatment, brazing, welding, melting, and mold heating. The present study covers a finite element analysis of the induction heating process which can rapidly raise mold temperature. To simulate the induction heating process, the electromagnetic field analysis and transient heat transfer analysis are required collectively. In this study, a coupled analysis connecting electromagnetic analysis with heat transfer simulation is carried out. The estimated temperature changes are compared with experimental measurements for various heating conditions.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.66-72
• /
• 2011

Injection pressure is an important factor in filling procedure for injection molded parts. In addition, weldlines should be avoided to successfully produce injection molded parts. In this study, we optimally obtained injection molding process parameters that minimize injection pressure. Then, we determined the thickness of the part to avoid weldlines. To solve the optimization problem proposed, we employed MAPS-3D (Mold Analysis and Plastics Solution-3 Dimension), a commercial CAE tool for injection molding analysis, and PIAnO (Process Integration, Automation, and Optimization) as a commercial PIDO (Process Integration and Design Optimization) tool. We integrated MAPS-3D into PIAnO, automated the analysis and design procedure, and performed optimization by employing PQRSM (Progressive Quadratic Response Surface Method) equipped in PIAnO. We successfully obtained optimization results, which demonstrates the effectiveness of our design method.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2342-2354
• /
• 2002

The present study has numerically predicted both the flow -induced and thermally-induced residual stresses and birefringence in injection o. injection/compression molded center -gated disks. Analysis system for entire molding process was developed based on an ap propriate physical modeling including a nonlinear viscoelastic fluid model, stress-optical law, a linear viscoelastic solid model, free volume theory for density relaxation phenomena and a photoviscoelasticity and so on. Part I presents physical modeling a nd typical numerical analysis results of residual stresses and birefringence in the injection molded center-gated disk. Thermal residual stress was found to be extensional near the center, compressive near the surface and tend to become toward tensional at the surface. A double-hump profile was obtained across the thickness in birefringence distribution: nonzero birefringence is found to be thermally induced, the outer peak is due to the shear flow and subsequent stress relaxation during the filling stage a nd the inner peak is due to the additional shear flow and stress relaxation during the packing stage. Predicted birefringence including both the flow -induced and thermally-induced one becomes quite similar to the experimental one.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.84-89
• /
• 2012

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. In order to predict residual stress which causes optical briefringence and mechanical warpage of silicone, finite element analysis was conducted for both curing and cooling process during silicone molding. For analysis of curing process, a cure kinetics model was derived based on the differential scanning calorimetry(DSC) test and applied to the material properties for finite element analysis. Finite element simulation result showed that the curing as well as the cooling process should be designed carefully so as to reduce the residual stress although the cooling process plays the bigger role than curing process in determining the final residual stress state. In addition, birefringence experiment was carried out in order to observe residual stress distribution. Experimental results showed that cooling-induced birefringence was larger than curing-induced birefringence.

• 한국정밀공학회지
• /
• 제30권2호
• /
• pp.216-222
• /
• 2013

This paper deals with the issue of kinematic modeling and analysis of a toggle mechanism. Based on the mathematic model of a conventional five-point type toggle mechanism. New five-point type toggle mechanism has been analyzed by computer simulation method. A sensitivity ratio has been defined and analyzed to compare its performance with four-point type toggle mechanism. A cycloidal motion has been applied to the cross head as an input and the motion of the moving platen is considered as an output. The effect of link design parameter as well as the type of toggle has been investigated by computer simulation to be available for industrial applications of injection molding machines.

• 한국정밀공학회지
• /
• 제31권2호
• /
• pp.165-170
• /
• 2014

Reproducibility of injection molding machines are studied at the study of this time. We applied computer aided engineering program so it could generate clamping force, about 1,500 kN, to the nozzle center part of flex link in tie-bar and at this time, we made sure condition of stress distribution and transformation quantity in flex link. The result of computer aided engineering transformation quantity was confirmed that transformation of top area was 247~257 kN and bottom areas was 273~279 kN and also was confirmed that the stresses are distributed in a range of 57~750 $N/mm^2$ from top to the bottom of the surface. This time we could confirm the condition of transformation quantity and stress distribution by enforcing the previously used structure analysis of flex link. And we utilized the reference data to establish important point of section for non destructive test overhaul.

• 한국CDE학회논문집
• /
• 제3권3호
• /
• pp.201-209
• /
• 1998

To develop timely an optimal fan, a design system and a new manufacturing process used step by step have to be integrated. A small sized optimal fan for refrigerators, that was the goal on this project, was developed by the following principal processes. All processes are technologically linked in many directions: The existing fan was measured through reverse engineering. The measured data was used for the basic source of 3D design. The performance tests were carried and used as the data for the evaluation of the existing fan. Flow analysis by FANS-3D/sup [1]/ was performed at the given information (pressure drop and flow rate) to find out the configuration of optimal fan design. The flow patterns were investigated to measure the performance of fan through numerical experiment. The grid point data obtained by the above analysis turned into 3D high efficiency fan model by using CATIA. The product was manufactured by RP process (SLS, SLA) and tested the characteristic curves of the developed fan to compare with the existing fan. The modification of fan design were all examined to see any change in performance and checked to find any deficiency in assembling the fan into a duct. After the plastics flow analysis of the injection molding cycle to ensure acceptable quality fan, an optimal mold was processed by using tool-path for the newly designed fan.

• 유변학
• /
• 제11권2호
• /
• pp.159-167
• /
• 1999

샌드위치 사출성형 공정은 기존의 사출성형 공정이 가지지 못하는 여러 장점들로 인해 최근 산업적으로 주목 받고 있는 고분자 가공 공정이다. 이 공정의 해석적인 접근은 거의 불가능하므로, 본 연구에서는 수치모사를 통해서 샌드위치 사출성형의 충전 공정을 연구하였다. 수치모사는 기본적으로 유한요소법을 사용하였고 Flow Analysis Network(FAN)/관할체적(Control Volume)법 등을 함께 이용하였다. 그리고 skin polymer의 선단을 확인할 수 있는 기존의 충전율 변수와 함께 skin polymer와 core polymer의 경계를 표시하는 새로운 충전율 변수를 도입하였고 이것을 이용하여 core polymer의 선단을 추적하였다. 새로운 충전율 변수는 두께 방향으로 온도장을 풀기 위해 나눈 각 층에서 정의되었다. 수치모사에 사용된 skin polymer와 core polymer로는 물성이 다른 두 고분자 물질을 주입시켜서 나타나는 충전 형태를 비교했다. 즉, 점도 상수, power-law 지수 등과 같은 유변 물성이 다른 두 고분자 물질을 충전시키기 위해 공정상 필요한 입구에서의 압력 등을 계산했으며 나중에 들어가게 되는 core polymer의 충전 완료 후 금형 내에서의 두께 방향과 흐름 방향으로의 분포 등을 구하였다. 또한 실제 공정 상에서 가공조건에 해당되는 switchover time과 벽 온도 등의 조건을 바꿔가면서 수치모사를 진행하였다. 사례 연구를 통하여 얻어진 물성과 가공 조건에 따른 core polymer의 충전 형태와 입구에서의 압력 등은 샌드위치 사출성형의 산업적 이용에 매우 유용하게 사용될 수 있다.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1490-1500
• /
• 1995

Compression molding of SMC (Sheet Molding Compound) in a thin plaque with substructures like a rib is involved with the formation of surface defect along the centerline over the rib area called by sink mark depending on process parameters. The surface quality of the external panels in automotive manufacturing is so critical that this kind of defect should be eliminated during manufacturing stages. The effect of process parameters on sink mark formation and the distribution of chopped fiberglasses in the compression molded thin plaque with a rib was experimentally investigated in the present study. In order to estimate the effect of the molding parameters such as molding temperature, mold closing speed, depth of the rib, corner radius of the rib, and final molded part thickness of flat portion on the depth of sink mark and the distribution of fiberglasses in the molded SMC part with the rib under the present experimental conditions, the molding parameters used in experiments were non-dimensionalized equation for predicting the depth of sink mark was determined through dimensional analysis based on the experimental data. The orientation and distribution of fiberglasses and fillers which directly affect the formation and depth of sink mark were investigated by taking the photographs of the cross-sectional area of the molded specimen using scanning electron microscope. The experimental results proposed from this investigation are useful in understanding the formation of sink mark and predicting the depth of sink mark in compression molding of SMC with substructures.