• Design & Manufacturing
• /
• 제12권3호
• /
• pp.60-65
• /
• 2018

The production of the automotive parts with the ultra high strength steel usually involves large amount of springback as well as fracture during the cold stamping process. Variable blank holding force(VBHF) can be used as one of the effective process parameters to reduce the springback amount with achieving better condition of formability. In this paper, VBHF with respect to the punch stroke is applied to the stamping process of the front side rear lower member for reducing the springback amount. From the analyses with constant blank holding force(CBHF), 24 kinds of VBHF conditions are utilized to investigate the springback tendency. It is noted that springback can be effectively reduced when BHF is increased near the bottom dead center because VBHF provides the tensile force to the blank with an adequate level of deformation without fracture.

• 대한안전경영과학회지
• /
• 제20권4호
• /
• pp.1-6
• /
• 2018

Recently, bicycle has means of effective healthy transportation, and riding the bicycles is considered as popular recreational and sporting activities. Also, the saddle, steering system, driving device and braking device are researched briskly because of consumer's need for driving performance and comfort. Especially, the importance of a cassette responsible for transmission function by transmitting power to the drive shaft through the chain is very focused. The writer conducted structural analysis for the sprocket of each level using the ANSYS widely used for the analysis. Speed shifting performance was enhanced by minimization / simplification of shifting point through a sort of tooth profile of the cassette. By partitioning a clear value type and other shifting point, it has been modified to enable smooth speed-shifting. In addition, as titanium precision forming process, this study studied the molding technique by blanking and dies forging for mass production of the cassette. so it could be expected that the entire drive train would utilize that in the future. The stamping process capability for thin materials for the mass production of the sprockets is applicable to producing automobile parts, so lightweight component production is likely to be possible through that, for the safety of driving.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.67-76
• /
• 2022

The customer demand for diverse colors in home appliances has increased. However, this has led to issues for manufacturers, such as ensuring cost effectiveness and high-level quality control. To resolve these issues, production engineers utilize computer-aided engineering (CAE) tools for injection-molding processes and assess the suitability of process parameters for products manufactured using the in-mold labeling method. CAE can solve various problems in manufacturing processes, thereby increasing production efficiency and decreasing manufacturing cost. In addition, it can be used analyze customer complaints related to surface defects, such as part differences and irregular spacing between parts, and ultimately reduce product returns. In this study, CAE was used to solve quality problems and implement the most economical manufacturing process.

• 한국지능시스템학회논문지
• /
• 제18권4호
• /
• pp.488-493
• /
• 2008

본 논문은 연속 주조 공정에서의 용강 높이에 대한 수학적인 비선형모델을 유도하는데, 여기에는 용강 높이, 몰드내의 입출력 유량, 스토퍼의 위치와 입력유량의 관계 등이 고려되었다. 비선형 모델은 MATLAB을 사용하여 구현되었으며 실제 데이터와 비교하여 수학적 모델이 유효함을 확인하였다. 구현된 비선형 모델을 사용하여, 퍼지 시스템에 의하여 변화하는 $K_p$값을 가지는 퍼지 PI 제어기를 사용하여, 기존에 사용되던 PI 제어기보다 나은 제어 성능 및 외란에의 강인성을 가짐을 시뮬레이션으로 보였다.

• 한국미생물·생명공학회지
• /
• 제24권2호
• /
• pp.178-184
• /
• 1996

Dryfilm method by using 3M Petrifilm$^{TM}$ has been examined to replace conventional agar method for isolation of microorganisms from foods. The objectives of the present study were to evaluate suitability of dryfilm method as a microbial isolation method and to determine the effect of antimicrobial agent on dryfilm for isolation of microorganisms from foods. Five different foods, milk, ground beef, fishery surimi, Takju and wheat flour were used to isolate the natural microflora in foods and the inoculated Escheri chia coli. Standard method agar (SMA, Difco) and Petrifilm$^{TM}$ aerobic count (PAC, 3M) were used to isolate total microorganisms from foods. Violet red bile agar (VRBA), brilliant green lactose bile (BGLB) broth and Petrifilm$^{TM}$ coliform count (PCC, 3M) were used to isolate coliforms from foods. E. coli broth (EC broth) and Petrifilm$^{TM}$ E. coli count (PEC, 3M) were used to isolate E. coli from foods. Acidified potato dextrose agar (APDA) and Petrifilm$^{TM}$ yeast & mold count (PYMC, 3M) were used to isolate yeasts and molds from foods. Total aerobic plate counts isolated from five different foods by SMA and PAC (3M) were riot significantly different each other at P<0.05 level and were highly correlated each other ($\geq$0.96). Mugwort extract as an antimicrobial agent did not affect microbial enumeratiion of Dryfilm. Significantly higher number of coliform colonies were formed on VRBA than PCC (3M) from ground beef, but they were not significantly different in coliform colonies from milk samples. PCC (3M) and BGLB were not significantly different for enumeration of coliforms in milk and beef samples. Significantly higher number of E. coli were isolated by EC broth than PEC from ground beef, but these were not significontly different for enumeration of E. coli from milk. Yeast and mold counts isolated from Takju and wheat flour by APDA and PYMC (3M) were not significantly different at P<0.05 level. These data indicate that dryfilm method by using 3M Petrifilm$^{TM}$ can be successively used as an alternative to conventional agar method for enumeration of microorganisms in various foods.

• 생약학회지
• /
• 제31권1호
• /
• pp.101-104
• /
• 2000

An inhibitory activity against ${\alpha}-glucosidase$ was identified in extract of an edible lichen, Umbilicaria esculenta. The inhibitor was very stable retaining above 95% of its original activity when treated with heat, acid and alkaline conditions, and some hydrolytic enzymes. Partially purified inhibitor showed strong inhibition against disaccharide hydrolytic enzymes of mammalian and mold origin, but weak or no inhibition against polysaccharide hydrolytic enzymes except glucoamylase. The inhibitor suppressed elevation of blood glucose level in rats after oral administration of soluble starch or sucrose.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.200-206
• /
• 1998

The aim of this study is to investigate the effect of impurity level and fabrication processes on the strength, impact and fracture toughness of 7075, 7050 and 7175 aluminum alloy forgings. A specially processed 7175S-T74 aluminum forgings was superior to a conventionally processed 7075-T73, 7050-T74 and 7175-T74 aluminum forgings in both strength and toughness. The reduction of impurity level of iron and silicon has significantly diminished the size and volume fraction of second phase particles such as $Al_7Cu_2Fe$ and $Mg_2Si$. A further reduction of the amount of second phase particles has been observed by applying a special fabrication process. This phenomena result from the application of intermediate soaking at higher temperature and more sufficiant hot working temperature than that of a conventional processing.

• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.134-138
• /
• 2000

An inhibitory activity against ${\alpha}$-glucosidase was identified in extracts of medicinal lichens, Parmelia austrosinensis and P. praesorediosa. The extracts retained almost all of their original activities when treated with heat, acid and alkaline conditions, and some hydrolytic enzymes. Partially purified inhibitor showed strong inhibition against disaccharide hydrolytic enzymes of mammalian and mold origin, but weak or no inhibition against polysaccharide hydrolytic enzymes except glucoamylase. The inhibitors from the two Parmelia sp. showed almost same retention time in HPLC. The inhibitor suppressed elevation of blood glucose level in rats after oral administration of soluble starch or sucrose.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.27-28
• /
• 2013

This study investigates the effect of a protective layer on the level of carbonation resistance of concrete. For the protective layer, a PE film, bubble sheets, double layered bubble sheets and styroform were placed in a mold before placing the concrete. In addition, PE film was retrofitted by attaching on the surface of the substrate concrete with a glue. Results showed that the carbonation depths of the control concrete were 4.6 mm and 5.2 mm at one week and two weeks exposure in an accelerated carbonation chamber, whereas the concrete with all types of protective layer except PE flim did not allow the ingress of carbon dioxide during the same period.

• 한국토양비료학회지
• /
• 제18권1호
• /
• pp.99-104
• /
• 1985

Cd이 오염(汚染)된 농경지(農耕地) 토양(土壤)에서 수도(水稻)를 재배(栽培)할 때에 수도(水稻)의 생육(生育), 수량(收量) 및 Cd흡수(吸收)에 미치는 토양중(土壤中) 유기물(有機物)과의 관계(關係)를 알기 위하여, 유기물(有機物)로 원예용(園藝用) 부엽토(腐葉土)를 첨가(添加)하고 Cd염(鹽)을 토양처리(土壤處理)하여 수도(水稻)를 Pot재배(栽培)한 결과(結果)를 요약(要約)하면 다음과 같다. (1) 토양중(土壤中) 유기물(有機物)의 증가(增加)로 Cd에 의한 수도(水稻)의 생육피해(生育被害)를 줄일 수 있었다. (2) 토양중(土壤中) 유기물(有機物)의 증가(增加)는 수도체(水稻體)의 지상부위(地上部位) 즉(卽), 엽초, 간(稈), 엽신(葉身) 및 현미중(玄米中)의 Cd 함량(含量)을 감소(減少)시킬 수 있었다. (3) 수도체(水稻體) 지상부위(地上部位)의 Cd 함유량(含有量)은 엽초, 간(稈), 엽신(葉身), 현미(玄米) 순(順)으로 낮았다. (4) 수도(水稻)의 계속(繼續) 담수재배(湛水栽培)는 Cd 25ppm 처리(處理)에서도 현미중(玄米中) Cd 함량(含量)이 오염미(汚染米) 판정기준치(判定基準値) 1ppm 이하(以下)인 0.59ppm이었다. (5) 담수상태하(湛水狀態下)에서 부엽토(腐葉土) 200g/건토(乾土) 8kg과 Cd 농도(濃度) 25ppm 처리(處理)로 현미중(玄米中) Cd 함량(含量)을 우리나라 비오염지(非汚染地) 답토양(畓土壤)에서 생산(生産)되는 현미중(玄米中) Cd 함량(含量)과 거의 유사(類似)한 0.14ppm으로 억제(抑制)되었다.