Browse > Article
http://dx.doi.org/10.14775/ksmpe.2022.21.05.067

Quality Improvement of IML Film Injection Molding Method through Structural Analysis  

Cha, Byung Su (Poong Won Co.)
Song, Chul Ki (School of Mechanical Engineering, ERI, Gyeongsang National University)
Cho, Woo Hyun (Department of Mechanical Convergence Engineering, Gyeongsang National University)
Yang, Won Ock (Department of Mechanical Convergence Engineering, Gyeongsang National University)
Lee, Ho Seong (Department of Mechanical Convergence Engineering, Gyeongsang National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.21, no.5, 2022 , pp. 67-76 More about this Journal
Abstract
The customer demand for diverse colors in home appliances has increased. However, this has led to issues for manufacturers, such as ensuring cost effectiveness and high-level quality control. To resolve these issues, production engineers utilize computer-aided engineering (CAE) tools for injection-molding processes and assess the suitability of process parameters for products manufactured using the in-mold labeling method. CAE can solve various problems in manufacturing processes, thereby increasing production efficiency and decreasing manufacturing cost. In addition, it can be used analyze customer complaints related to surface defects, such as part differences and irregular spacing between parts, and ultimately reduce product returns. In this study, CAE was used to solve quality problems and implement the most economical manufacturing process.
Keywords
In-mold Labeling Film Injection; Injection Molding; Computer-aided Engineering;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Kabanemi, K. K., Vallancourt, H., Wang, H., and Salloum, G., "Residual Stresses, Shrinkage and Warpage of Complex Injection Molded Products: Numerical Simulation and Experiment Validation," Polymer Engineering and Science, Vol. 38, No. 1, pp. 21-37, 1998.   DOI
2 Zoetelief, W. F., Dourven, L. F. A., and Ingen, A., "Residual Thermal Stresses in Injection Molded Product," Polymer Engineering and Science, Vol. 36, No. 14, pp. 1886-1896, 1996.   DOI
3 Liu, F., Zhou, H., and Li, D., "Numerical Simulations of Residual Stresses and Warpage in injection Molding," Journal of Reinforced Plastics and Composites, Vol. 28, No. 5, pp. 571-585, 2009.   DOI
4 Jacques, M., "An Analysis of Thermal Warpage in Injection Molded Flat Parts due to Unbalanced Cooling," Polymer Engineering and Science, Vol. 22, No. 4, pp. 241-247, 1982.   DOI
5 Choi, D. S. and Im, Y. T., "Prediction of Shrinkage and Warpage in Consideration of Residual Stress in Integrated Simulation of Injection Molding," Composite Structures, Vol. 47, No. 1, pp. 655-665, 1999.   DOI
6 Lee, J. W., Jang, E. G., Shin, S. W., Park, S. H., and Jung, H. S, "Prediction of Residual Stress Caused by IML Process and Deformation due to Thermal Impact," Transactions of the Korean Society of Mechanical Engineers, Volume A, Vol. 34, No. 3, pp. 375-382, 2010.   DOI
7 Lee, J. W., "A Study for Numerical Model Development and the Effect of Processing Parameters in IML Process and Thermal Impact," G901: A-0005581342, pp. 13~14, 2010.