• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.376-387
• /
• 2008

Objective: The purpose of this study was to compare the three dimensional changes of tooth movement using four different types of maxillary molar distalization appliances; pendulum appliance (PD), mini-implant supported pendulum appliance (MPD), stainless steel open coil spring (SP) and mini-implant supported stainless steel open coil spring (MSP). Methods: These experiments were performed using the Calorific $machine^{(R)}$ which can simulate dynamic tooth movement. Computed tomography (CT) images of the experimental model were taken before and after tooth movement in 1 mm thicknesses and reconstructed into a three dimensional model using V-works $4.0^{TM}$. These reconstructed images were superimposed using Rapidform $2004^{TM}$ and the direction and amount of tooth movement were measured. Results: The mean reciprocal anchor loss ratio at the first premolar was 17 - 19% for the PD and SP groups. The appliances using mini-implants (MPD or MSP) resulted in less anchorage loss (7 - 8%). On application of a pendulum appliance or MPD, distalization was obtained by tipping rather than by bodily movement. Furthermore, the maxillary second molar tipped distally and bucally. But on application of MSP, distalization was achieved almost by bodily movement. Conclusions: Regarding tooth movement patterns during molar distalization, stainless steel open coil spring with indirect skeletal anchorage was relatively superior to other methods.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.103-117
• /
• 1981

The data about dental caries obtained from 1438 preschool children (male 797, female 641) in Seoul aged from 3 to 6 were analyzed by their sexes, ages, jaws and teeth surfaces. The results were as follows. 1. dmf rate : 92.63% 2. dmft index : 6.06 dmft rate 30.81 % dmfs index : 11.82 dmfs rate 12.02 % 3. d,m & f rate d rate: 79.45% m rate: 8.15% f rate : 12.40 % 4. dft index : 5.94 5. The order of caries susceptible tooth 1. Lower deciduous 2nd molar 2. Lower deciduous 1st molar 3. Upper deciduous 2nd molar 4. Upper deciduous lateral incisor 5. Upper deciduous cental incisor 6. Upper deciduous lateral incisor 7. Lower deciduous canine 8. Upper deciduous canine 9. Lower deciduous central incisor 10. Lower deciduous lateral incisor 6. Predilection sites of each tooth A) Deciduous central incisor ; Max. : Mesial cavity Mand. : Mesio-distal cavity B) Decidous lateral incisor ; Max. : Mesial cavity Mand. : Distal cavity=Mesial cavity C) Deciduous canine; Max. : Labial cavity Mand. : Distal cavity D) Decidous 1st molar ; Max. : Disto-occlusal cavity Mand.: Disto-occlusal cavity E) Deciduous 2nd molar ; Max. : Linguo-occlusal cavity Mand.: Occlusal cavity 7. All the values in caries criteria in 1981 were somewhat lower than in 1968, but m & f rate were increased.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.97-114
• /
• 1999

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for maxillary molar occlusion. The results of the study were as follows ; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of Maxillary premolar is appeared V form. 6. The development groove of Maxillary molar is appeared W form. 7. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 8. I was knew that the lingual groove and stuart's groove of molar runs parallel with oblique ridge. 9. The buccal groove of molar is formed parallel with direction of teeth arrangement.

• Imaging Science in Dentistry
• /
• v.39 no.2
• /
• pp.89-92
• /
• 2009

Purpose: To assess the angle between mandibular canal and occlusal plane at each posterior tooth region and location of mental foramen on the panoramic radiographs. Materials and Methods: This study analysed 46 half-mandibles of panoramic radiographs. Inferior border of mandibular canal was traced. Occlusal plane was drawn from lingual cusp tip of the first premolar to distolingual cusp tip of the second molar. Perpendicular line from occlusal plane was drawn at each tooth region and then tangential lines were drawn from the crossing points at canal. the angle between occlusal plane and tangential line was measured. The location of mental foramen was also studied. According to the location of mental foramen, radiographs were divided into M (mesial) group and D (distal) group on the basis of the second premolar. and then inter-group analysis about mandibular canal angle was done. Results: The angles of mandibular canals were -17.7$^{\circ}$, -9.5$^{\circ}$, 8.2$^{\circ}$, 22.3$^{\circ}$, and 39.2$^{\circ}$at first premolar, second premolar, first molar, second molar, and third molar, respectively. The commonest position of the mental foramen was distal to the second premolar. Inter-group comparison showed statistically significant difference at the second premolar and the first molar(p<0.001). Conclusion: The knowledge of mandibular canal angle and location of mental foramen can help understanding the course of mandibular canal. (Korean J Oral Maxillofac Radiol 2009; 39: 89-92)

• The Journal of the Korean dental association
• /
• v.55 no.2
• /
• pp.128-138
• /
• 2017

Objective: The aim is to evaluate the potential of the mesiodens through the comparative inorganic analysis of 3rd molar teeth prior to clinical study. Material and methods: The extracted mesiodens and the 3rd molar teeth were prepared. The teeth are prepared as in the process of the autogenous tooth bone graft. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis was performed for inorganic analysis. Results: Rough and porous surfaces were observed in all materials in SEM analysis. Ca/P ratio of mesiodens was 1.55 and the 3rd molar was 1.22 in EDS analysis. XRD analysis shows that the 3 main peaks position were similar. This means that the graft materials are very similar to that of the crystallinity. Conclusions: The mesiodens and the 3rd molar teeth are very similar to the inorganic component. These results provide the reasonable rationale that mesiodens can be used as autogenous tooth bone graft in a clinic.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.11-21
• /
• 2024

This study aimed to analyze the prevalence and severity of infraoccluded primary molars (IPM) and their correlation with the agenesis of permanent successors (APS). A total of 4,011 panoramic radiographs from children aged 4 to 11 years who had all 8 primary molars were examined. The prevalence of APS was analyzed based on the severity and tooth type of IPM. The prevalence of IPM was 13.0%, and there was no difference between genders. The majority of the children had two IPMs each. In all tooth types, mild infraocclusion was the most prevalent, whereas severe infraocclusion was the least frequent. Among the types of primary molars, the lower primary first molar (62.3%) was the most affected, followed by the lower primary second molar (27.7%), the upper primary second molar (5.8%), and the upper primary first molar (4.2%). Infraocclusion was 11.2 times more prevalent in the mandible than in the maxilla, with no significant difference between the left and right sides. The correlation between IPM and APS was also investigated. Among the subjects, 177 had one or more agenesis of premolars, of whom 54 (30.5%) had IPM. Additionally, among the 521 individuals with IPM, 54 individuals exhibited APS (10.4%). This study identified a noteworthy prevalence of infraocclusion, with notable variations among molar types. The LPFM was particularly affected. The majority of cases were classified as mild in severity. Furthermore, a compelling association between IPM and APS was established. Understanding this connection may enhance treatment strategies for infraoccluded teeth and tooth agenesis.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.99-104
• /
• 2023

Trace elements (TEs) have significant effects on both dental health and human health. Toxic effects are caused by deficiency or excess of TEs. This study was performed to determine levels of toxic and trace elements in incisor and molar teeth sampled from male and female participants residing in the north and south regions of Sudan. The tooth enamel of 18 extracted human teeth was analyzed using particle-induced x-ray emission (µ-PIXE) to determine its elemental profile and distribution. GeoPIXEII software package was used for the analysis of µ-PIXE data. The main elements determined were Na, Mg, P, S, Cl, K, Ca, Mn, Fe, Zn, Co, and Sr which were homogeneously distributed in the areas of the tooth enamel mapped with micro-PIXE.

• Restorative Dentistry and Endodontics
• /
• v.41 no.2
• /
• pp.148-153
• /
• 2016

Tooth transposition is a disorder in which a permanent tooth develops and erupts in the normal position of another permanent tooth. Fusion and gemination are developmental disturbances presenting as the union of teeth. This article reports the nonsurgical retreatment of a very rare case of fused teeth with transposition. A patient was referred for endodontic treatment of her maxillary left first molar in the position of the first premolar, which was adjacent to it on the distobuccal side. Orthopantomography and periapical radiography showed two crowns sharing the same root, with a root canal treatment and an associated periapical lesion. Tooth fusion with transposition of a maxillary molar and a premolar was diagnosed. Nonsurgical endodontic retreatment was performed. At four yr follow-up, the tooth was asymptomatic and the radiolucency around the apical region had decreased, showing the success of our intervention. The diagnosis and treatment of fused teeth require special attention. The canal system should be carefully explored to obtain a full understanding of the anatomy, allowing it to be fully cleaned and obturated. Thermoplastic techniques were useful in obtaining hermetic obturation. A correct anatomical evaluation improves the set of treatment options under consideration, leading to a higher likelihood of esthetically and functionally successful treatment.

• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.129-136
• /
• 1999

Etiologies of the molar teeth impaction are cyst, supernumerary teeth, ankylosis by replacement resorption, abnormal eruptive path, improper orthodontic treatment, etc. If the impacted teeth were untreated, the sequallae was as follows : loss of occlusal function, loss of permanent tooth, extrusion of opposite tooth, root resolution of adjacent teeth. The most important factor of solution of impacted teeth is treatment timing & proper application of orthodontic forces.