• 대한치과교정학회지
• /
• 제38권6호
• /
• pp.376-387
• /
• 2008

본 연구의 목적은 pendulum 장치, 미니임플란트를 동반한 pendulum장치(펜듈럼), 오픈코일 스프링 및 미니임플란트를 동반한 오픈코일 스프링 이용 시 각각의 치아이동 양상을 3차원적으로 분석하는 데 있었다. 상악 좌측 치조골 및 치아 모형을 제작하고, Calorific $machine^{(R)}$을 이용하여 모형상에서 대구치를 3 mm 원심 이동시켰다. 실험은 5회씩 반복 실시하였다. 모델을 전산화 단층 촬영한 후 V-$Works^{TM}$를 이용하여 3차원 모델을 제작하였다. $Rapidform^{TM}$상에서 3차원적으로 이동방향과 이동량을 계측하였고, 각각의 장치에 관한 통계적 유의성을 검정하였다. 교정용 미니임플란트를 간접 골성 고정원으로 이용하여 오픈코일 스프링으로 구치부를 원심으로 이동시켰을 때가 치체이동에 가장 가까운 이동양상을 보였고, 고정원 소실도 적게 나타났다 (p < 0.05). 오픈코일 스프링, 펜듈럼 장치 모두 미니임플란트를 부가적으로 이용했을 때 고정원 소실량이 적었다 (p < 0.05). 미니임플란트를 이용하지 않은 경우에는 두 장치의 고정원 소실량이 비슷하였다. 미니임플란트의 이용 여부와 관계없이 펜듈럼 장치로 상악 구치 원심 이동 시 오픈코일 스프링에 비해 제1대구치가 조절성 경사이동 양상으로 이동되었고 (p < 0.05), 제2대구치는 비조절성 경사이동 양상을 보였으며, 치관의 협측경사이동이 일어났다 (p < 0.05). 이와 같은 결과를 근거로 간접 골성 고정원을 이용한 오픈코일 스프링이 상악 구치의 원심 치체이동에 가장 효과적인 장치였으며, 펜듈럼 장치를 이용한 구치부 원심이동 시에는 추가적인 조절이 필요하다고 할 수 있다.

• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.103-117
• /
• 1981

The data about dental caries obtained from 1438 preschool children (male 797, female 641) in Seoul aged from 3 to 6 were analyzed by their sexes, ages, jaws and teeth surfaces. The results were as follows. 1. dmf rate : 92.63% 2. dmft index : 6.06 dmft rate 30.81 % dmfs index : 11.82 dmfs rate 12.02 % 3. d,m & f rate d rate: 79.45% m rate: 8.15% f rate : 12.40 % 4. dft index : 5.94 5. The order of caries susceptible tooth 1. Lower deciduous 2nd molar 2. Lower deciduous 1st molar 3. Upper deciduous 2nd molar 4. Upper deciduous lateral incisor 5. Upper deciduous cental incisor 6. Upper deciduous lateral incisor 7. Lower deciduous canine 8. Upper deciduous canine 9. Lower deciduous central incisor 10. Lower deciduous lateral incisor 6. Predilection sites of each tooth A) Deciduous central incisor ; Max. : Mesial cavity Mand. : Mesio-distal cavity B) Decidous lateral incisor ; Max. : Mesial cavity Mand. : Distal cavity=Mesial cavity C) Deciduous canine; Max. : Labial cavity Mand. : Distal cavity D) Decidous 1st molar ; Max. : Disto-occlusal cavity Mand.: Disto-occlusal cavity E) Deciduous 2nd molar ; Max. : Linguo-occlusal cavity Mand.: Occlusal cavity 7. All the values in caries criteria in 1981 were somewhat lower than in 1968, but m & f rate were increased.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.97-114
• /
• 1999

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for maxillary molar occlusion. The results of the study were as follows ; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of Maxillary premolar is appeared V form. 6. The development groove of Maxillary molar is appeared W form. 7. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 8. I was knew that the lingual groove and stuart's groove of molar runs parallel with oblique ridge. 9. The buccal groove of molar is formed parallel with direction of teeth arrangement.

• Imaging Science in Dentistry
• /
• 제39권2호
• /
• pp.89-92
• /
• 2009

Purpose: To assess the angle between mandibular canal and occlusal plane at each posterior tooth region and location of mental foramen on the panoramic radiographs. Materials and Methods: This study analysed 46 half-mandibles of panoramic radiographs. Inferior border of mandibular canal was traced. Occlusal plane was drawn from lingual cusp tip of the first premolar to distolingual cusp tip of the second molar. Perpendicular line from occlusal plane was drawn at each tooth region and then tangential lines were drawn from the crossing points at canal. the angle between occlusal plane and tangential line was measured. The location of mental foramen was also studied. According to the location of mental foramen, radiographs were divided into M (mesial) group and D (distal) group on the basis of the second premolar. and then inter-group analysis about mandibular canal angle was done. Results: The angles of mandibular canals were -17.7$^{\circ}$, -9.5$^{\circ}$, 8.2$^{\circ}$, 22.3$^{\circ}$, and 39.2$^{\circ}$at first premolar, second premolar, first molar, second molar, and third molar, respectively. The commonest position of the mental foramen was distal to the second premolar. Inter-group comparison showed statistically significant difference at the second premolar and the first molar(p<0.001). Conclusion: The knowledge of mandibular canal angle and location of mental foramen can help understanding the course of mandibular canal. (Korean J Oral Maxillofac Radiol 2009; 39: 89-92)

• 대한치과의사협회지
• /
• 제55권2호
• /
• pp.128-138
• /
• 2017

Objective: The aim is to evaluate the potential of the mesiodens through the comparative inorganic analysis of 3rd molar teeth prior to clinical study. Material and methods: The extracted mesiodens and the 3rd molar teeth were prepared. The teeth are prepared as in the process of the autogenous tooth bone graft. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis was performed for inorganic analysis. Results: Rough and porous surfaces were observed in all materials in SEM analysis. Ca/P ratio of mesiodens was 1.55 and the 3rd molar was 1.22 in EDS analysis. XRD analysis shows that the 3 main peaks position were similar. This means that the graft materials are very similar to that of the crystallinity. Conclusions: The mesiodens and the 3rd molar teeth are very similar to the inorganic component. These results provide the reasonable rationale that mesiodens can be used as autogenous tooth bone graft in a clinic.

• 대한소아치과학회지
• /
• 제51권1호
• /
• pp.11-21
• /
• 2024

This study aimed to analyze the prevalence and severity of infraoccluded primary molars (IPM) and their correlation with the agenesis of permanent successors (APS). A total of 4,011 panoramic radiographs from children aged 4 to 11 years who had all 8 primary molars were examined. The prevalence of APS was analyzed based on the severity and tooth type of IPM. The prevalence of IPM was 13.0%, and there was no difference between genders. The majority of the children had two IPMs each. In all tooth types, mild infraocclusion was the most prevalent, whereas severe infraocclusion was the least frequent. Among the types of primary molars, the lower primary first molar (62.3%) was the most affected, followed by the lower primary second molar (27.7%), the upper primary second molar (5.8%), and the upper primary first molar (4.2%). Infraocclusion was 11.2 times more prevalent in the mandible than in the maxilla, with no significant difference between the left and right sides. The correlation between IPM and APS was also investigated. Among the subjects, 177 had one or more agenesis of premolars, of whom 54 (30.5%) had IPM. Additionally, among the 521 individuals with IPM, 54 individuals exhibited APS (10.4%). This study identified a noteworthy prevalence of infraocclusion, with notable variations among molar types. The LPFM was particularly affected. The majority of cases were classified as mild in severity. Furthermore, a compelling association between IPM and APS was established. Understanding this connection may enhance treatment strategies for infraoccluded teeth and tooth agenesis.

• 분석과학
• /
• 제36권2호
• /
• pp.99-104
• /
• 2023

Trace elements (TEs) have significant effects on both dental health and human health. Toxic effects are caused by deficiency or excess of TEs. This study was performed to determine levels of toxic and trace elements in incisor and molar teeth sampled from male and female participants residing in the north and south regions of Sudan. The tooth enamel of 18 extracted human teeth was analyzed using particle-induced x-ray emission (µ-PIXE) to determine its elemental profile and distribution. GeoPIXEII software package was used for the analysis of µ-PIXE data. The main elements determined were Na, Mg, P, S, Cl, K, Ca, Mn, Fe, Zn, Co, and Sr which were homogeneously distributed in the areas of the tooth enamel mapped with micro-PIXE.

• Restorative Dentistry and Endodontics
• /
• 제41권2호
• /
• pp.148-153
• /
• 2016

Tooth transposition is a disorder in which a permanent tooth develops and erupts in the normal position of another permanent tooth. Fusion and gemination are developmental disturbances presenting as the union of teeth. This article reports the nonsurgical retreatment of a very rare case of fused teeth with transposition. A patient was referred for endodontic treatment of her maxillary left first molar in the position of the first premolar, which was adjacent to it on the distobuccal side. Orthopantomography and periapical radiography showed two crowns sharing the same root, with a root canal treatment and an associated periapical lesion. Tooth fusion with transposition of a maxillary molar and a premolar was diagnosed. Nonsurgical endodontic retreatment was performed. At four yr follow-up, the tooth was asymptomatic and the radiolucency around the apical region had decreased, showing the success of our intervention. The diagnosis and treatment of fused teeth require special attention. The canal system should be carefully explored to obtain a full understanding of the anatomy, allowing it to be fully cleaned and obturated. Thermoplastic techniques were useful in obtaining hermetic obturation. A correct anatomical evaluation improves the set of treatment options under consideration, leading to a higher likelihood of esthetically and functionally successful treatment.

• 대한치과교정학회지
• /
• 제29권1호
• /
• pp.129-136
• /
• 1999

유착, 부적절한 교정치료, 과잉치, 낭종, 비정상적인 맹출경로등의 국소적인 원인으로 인하여 구치부의 매복이 발생할 수가 있다. 매복치는 적절한 치료를 하지 않으면, 교합기능의 상실, 영구치의 상실, 대합치의 정출, 인접치의 치근흡수등을 야기 할 수가 있다. 매복치를 성공적으로 맹출유도하기 위해서는 매복치의 치근형성여부가 중요한 요소가 되며, 매복치의 치근형태, 주위환경등을 유의한 적절한 교정력이 가해져야 한다.