• 제목/요약/키워드: molar ratios

검색결과 301건 처리시간 0.028초

소각재 용융슬래그를 이용한 제올라이트 Na-A의 합성 (Synthesis of Na-A type Zeolite From Melting Slag)

  • 장영남;채수천;배인국;류경원
    • 한국광물학회지
    • /
    • 제18권1호
    • /
    • pp.11-17
    • /
    • 2005
  • 소각재 용융슬래그를 출발물질로 하여 알카리 조건하에서 활성화시킴으로써 Na-A형 제올라이트를 합성하였다. 합성실험은 스텐레스 철재로 제작된 반응용기를 사용하였다. 출발물질은 슬래그 외에 수정인공합성 공장에서 배출되는 '규산질 수용액'과 NaAlO₂ 수용액을 사용하였는데, 전자의 화학조성은 SiO₂ 5.7 wt% Na₂O 3.2 wt%이고, 후자는 몰비가 Na₂O/Al₂O₃= 1.2와 H₂O/Ma₂O=9의 조건으로 알루미늄 드로스와 NaOH 수용액을 반응시켜 제조하였다. 위에서 언급된 슬래그, '규산질 수용액' 그리고 NaAlO₂ 수용액을 혼합시킨 혼성물을 약 80℃에서 7∼8시간 반응시키면 Na-A형 제올라이트가 단일상으로 합성되었다. 출발물질의 이상적인 혼합비율은 Na₂O:Al₂O₃:SiO₂의 몰비가 1.3∼l.4 : 0.8∼0.9 : 2이었으며 반응용액과 슬래그의 비율은 1 : 7∼10 (g/cc)이었다. 합성된 제올라이트의 형태는 균일한 입방형이었으며 입도는 약 1 ㎛이었다. 한편, Ca/sup 2+/이온에 대한 이온교환 용량(CEC)은 180∼210 meq/100 g이었으므로 통용되는 세제용 제올라이트와 비교하면 약 80% 수준이었으므로 폐수처리나 오염된 중금속처리와 같은 환경처리용으로 사용될 수 있을 것이다.

오메가 3 지방산을 함유한 Sucrose Ester의 합성 (The Base Catalyzed Synthesis of Sucrose Ester Containing Omega-3 Fatty Acids)

  • 신정아;장지선;홍장환;이기택
    • 한국식품영양과학회지
    • /
    • 제35권9호
    • /
    • pp.1224-1231
    • /
    • 2006
  • 고급불포화지방산인 docosahexaenoic acid ethylester (DHAEE)와 sucrose를 transesterification반응을 하여 sucrose ester를 기질 및 촉매의 비율, 반응시간, 용매사용 및 기압 등을 달리하여 합성하고, 합성율을 살펴보았고, 특히, 섭취 시 인체 내에서 이용 가능한 DHA를 함유하고 있으며, hydrophilic한 유화제로써 sucrose fatty acid mono ester의 합성율을 높이는 합성조건을 연구하였다. 무용매 상태에서의 sucrose ester의 합성율이 낮았기 때문에 반응용매로써 dimethyl sulfoxide(DMSO)를 사용하여 몰비율과 반응시간에 따른 합성을 실시하였다. 여러 반응조건 중 DHAEE의 전환율(%)은 sucrose:DHAEE의 몰비율이 1:0.98, 1:0.60, 1:0.40, 1:0.20인 SE#4, SE#5, SE#6, SE#7에서 모두 96% 이상을 나타내었다. 특히, SE#6(1:0.4 mole)에서 반응시간에 따른 전환율과 sucrose ester의 조성변화를 살펴본 결과, 반응시간 1시간일 때 55.3%의 전환율(mono ester 91.6%)을 보였고, 이후 반응 3.5시간일 때에는 97.1%(mono ester 66%)의 전환율을 보였다. 따라서 반응초기에 대부분의 sucrose ester가 합성되며, 특히 반응시간이 길어짐에 따라 mono ester에서 di-, tri- 및 polyester로 그 조성이 점차 변화됨을 확인하였고, 기질 중 DHAEE의 비율이 증가할수록 sucrose mono ester의 생성은 감소한 반면에, sucrose di-, tri- 및 polyester의 생성은 증가함을 확인하였다. 연구된 합성조건 중 sucrose mono ester의 합성은 1:0.2(sucrose:DHAEE)의 몰비율로 2.5시간동안 반응(SE#7)하였을 때 98.5%의 높은 전환율을 보이면서 그 조성은 87.3%로 가장 높게 합성되었다.

원료 배합에 따른 칼슘 실리케이트 시멘트 클링커의 성분 및 상 분석 (Component and Phase Analysis of Calcium Silicate Cement Clinker by Raw Materials Mix Design)

  • 이향선;송훈
    • 한국건축시공학회지
    • /
    • 제22권3호
    • /
    • pp.251-258
    • /
    • 2022
  • 시멘트산업에서는 CO2 배출량 감축을 위해 원료대체 및 전환기술, 저탄소 신열원 활용 공정효율 향상기술, 공정발생 CO2 포집 및 재자원화 기술 개발이 진행되고 있다. 공정발생 CO2 포집 및 재자원화는 대규모로 배출되는 배기가스에서 CO2를 분리 및 포집하는 기술로 지중저장과 해양저장, 탄산염 광물화로 크게 세 가지로 나뉜다. 이에 본 연구에서는 CO2를 탄산염광물로 저장할 수 있는 CSC를 개발하고자 기초 실험을 진행하였다. 클링커 원료 배합에서 SiO2/(CaO+SiO2) 몰비가 다른 세 가지의 CSC 클링커를 제작하여 클링커의 성분 및 상 분석을 진행하였다. 제조한 CSC 클링커는 Wollastonite와 Rankinite가 생성되었다. 또한, CSC 페이스트 탄산화 시험편은 탄산화 생성물로 Calcite가 생성되었음을 확인할 수 있었다. CSC 클링커와 CSC 탄산화 시험편은 CSC 클링커 화학조성에서 SiO2/(CaO+SiO2) 몰비가 낮을수록 Wollastonite 생성량이 감소하고 Rankinite의 생성량이 증가하였고, CSC 페이스트 시험편의 탄산화 진행에 따라 Calcite 생성량이 증가하였다. 이는 Rankinite가 Wollastonite보다 CO2를 광물화하는데 반응성이 높은 것으로 판단된다.

Assessment of Flavin-containing Monooxygenase (FMO) Activity by Determining Urinary Ratio of Theobromine and Caffeine in a Korean Population after Drinking a Cup of Coffee

  • Chung, Woon-Gye;Kang, Ju-Hee;Roh, Hyung-Keun;Lee, Kyung-Hoon;Park, Chang-Shin;Cha, Young-Nam
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제3권2호
    • /
    • pp.207-213
    • /
    • 1999
  • To examine individual variation in drug metabolism catalyzed by flavin-containing monooxygenase (FMO), 179 Korean volunteers' urinary molar concentration ratio of theobromine (TB) and caffeine (CA) was determined. Their urine was collected for 1 hr (between 4 and 5 hrs) after they drank a cup of coffee containing 115 mg CA and analyzed by an HPLC system. The lowest TB/CA ratio obtained was 0.40, the highest ratio was 15.17 (38-fold difference), and the median ratio for all subjects was 1.87. The mean was 2.66 with 2.36 S.D.. In 134 nonsmokers, the mean ratio was $2.35{\pm}1.93,$ that of 51 males was $2.30{\pm}2.26$ and 83 females was $2.37{\pm}1.85,$ respectively. There was no significant gender difference in the obtained TB/CA ratio (Mann-Whitney test; p=0.518). There were no smokers among the 83 female volunteers. In the remaining 96 male subjects, the ratio obtained in 51 nonsmokers was $2.30{\pm}2.06$ and that of 45 smokers was $3.62{\pm}3.19.$ This indicated that the TB/CA ratio was increased significantly in smokers (p=0.007). However, when the TB/CA ratios (FMO activity) obtained in all 179 Korean volunteers are compared with the urinary concentration ratios of paraxanthine (PX) plus 1,7-dimethylurate (17U) to CA (CYP1A2 activity), there was a weak but significant correlation (Pearson's correlation coefficient test; $r^2=0.28,$ p<0.0001). This indicates that, although the urinary TB/CA ratio mostly represents FMO activity, minor contribution by CYP1A2 activity cannot be ignored. In conclusion, the FMO activity measured by taking the urinary TB/CA ratio from normal healthy Korean volunteers shows marked individual variations without significant gender differences and the increased TB/CA ratio observed in cigarette smokers may have been caused by the increased CYP1A2 activity.

  • PDF

후진 이부성형술의 경조직과 연조직 측모 변화 예측에 관한 연구 (A Study on the Prediction of Hard and Soft Tissue Changes after Setback Genioplasty)

  • 양정은;김일규;조현영;주상현;편영훈;정범상;배상필;조현우
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제34권6호
    • /
    • pp.413-420
    • /
    • 2012
  • Purpose: The purpose of this setback genioplasty study is to develop a prediction method for the calculated osteotomy angle using horizontal and vertical changes as well as to evaluate the proportion of hard and soft tissue changes. Methods: Twelve patients who had received setback genioplasty with other maxillofacial surgery were examined. Three lateral cephalograms were taken just before surgery, immediately after surgery, and 3 months later surgery. A reference line was established to the reference point of the inner most point of the lingual symphysis cortex, incisor tip, and 2nd molar cusp tip. Measuring was conducted from pogonion (Pg), menton (Me), labrale inferius (Li), Mentolabial fold, soft tissue pogonion (Pg'), and soft tissue menton (Me') to the reference lines. Results: In setback genioplasty, the skeletal Pg moved posteriorly 5.07 mm. The ratios of soft tissue to hard tissue movement were 36% posteriorly and 62% inferiorly at Pg', 67% posteriorly and 104% inferiorly at Me', and 34% anteriorly and 164% posteriorly at Li. In reduction & setback genioplasty, skeletal Pg moved posteriorly 4.63 mm and skeletal Me moved superiorly 3.63 mm. The ratios of soft tissue to hard tissue movement were 76% posteriorly and 18% superiorly at Pg', 68% posteriorly and 42% superiorly at Me', and 44% anteriorly, 124% posteriorly at Li. The calculated mean slope angle, based on ${\Delta}H/{\Delta}V$ ratio, was 61.25 and the measured mean slope angle was 60.17. Thus, the calculated and measured slope angles have a similarity. Conclusion: In setback genioplasty, soft tissue moves posteriorly and inferiorly. In particular, at the Me' and Pg', the inferior movement of the soft tissue is greater than the posterior movement. Also, the predictable results (measured slope angle) after operation can be achieved by the calculated slope angle. Thus, the relationship of soft and hard tissue changes must be considered as the results are predictable.

자외선 경화형 유기/무기 복합코팅에 의한 폴리카보네이트의 내마모성 향상 연구 (Study on the Improved Abrasion Resistance of Polycarbonate Substrate by UV-curable Organic/Inorganic Hybrid Coatings)

  • 윤석은;우희권;김동표
    • 폴리머
    • /
    • 제24권3호
    • /
    • pp.389-398
    • /
    • 2000
  • 폴리카보네이트 표면에 spin-coating한 유/무기 복합 코팅막을 자외선 경화와 가열(12$0^{\circ}C$, 12시간)처리함으로써 약 4~13 $\mu\textrm{m}$ 두께의 투명한 내마모성 유/무기 복합코팅막을 제조하였다. 코팅용액은 무기상과 유기상을 각각 0 : 100, 20 : 80, 30 : 70, 50 : 50, 80 : 20 중량비로 혼합한 다음 광개시제, 증감제 및 계면활성제를 첨가하여 제조하였다. 무기상은 TEOS와 실란커플링제 MPTMS을 1 : 2 혹은 2 : 1몰비로 흔합하여 졸ㆍ겔 반응으로 제조하였으며, 유기상은 2관능형 urethane acrylate 올리고머, 다관능형 TMPTA와 HDDA를 4:3:3 wt% 비율로 흔합하여 제조하였다. 유/무기복합상의 화학적 변화는 FT-IR, $^{29}$ Si-NMR로 분석하였으며, 열분석과 코팅층 표면 형상은 TGA/DSC, SEM, AFM으로 분석하였다. 무기물의 함량과 실란커플링제의 첨가량이 증가 할수록 분자수준의 흔화도가 개선되고 표면 평활도와 내마모성도 향상되었다. 즉 약 10 $\AA$ 이하의 표면 거칠기와 약 15$0^{\circ}C$의 T$_{g}$를 나타내는 시료는 500회 마모시험 전후 단지 16%의 광투과도 감소만을 보인 반면에, 무코팅 폴리카보네이트를 46%의 광투과율 감소를 나타내었다..

  • PDF

Association between a M-Iacking mutant D75N of pharaonis phoborhodopsin and its transducer is stronger than the complex of the wild-type pigment: Implication of the signal transduction

  • Sudo, Yuki;Iwamoto, Masayuki;Shimono, Kazumi;Kamo, Naoki
    • Journal of Photoscience
    • /
    • 제9권2호
    • /
    • pp.314-316
    • /
    • 2002
  • In halobacterial membrane, pharaonis phoborhodopsin (or pharaonis sensory rhdopsin II, psRII) forms a complex with its transducer pHtrII. Flash-photolyis of D75N mutant did not yield M-intermediate but an O-like intermediate is observed. We examined the interaction between D75N of ppR and t-Htr (truncated pHtrII). These formed a complex in the presence of n-dodecyl-$\beta$-D-maltoside, and the association accelerated the decay of the 0 of D75N from 15 to 56 s$\^$-1/. From the decay time constants under varying ratios of D75N and t-Htr, n, the molar ratio of D75N/t-Htr in the complex, and K$\_$D/, the dissociation constant, were estimated. The value of n was unity and K$\_$D/ was estimated to 146 nM. This K$\_$D/ value can be considered as the association between the photo-intermediate and t-Htr, which is deduced by the method of estimation. Previously we (Photochem. Photobiol. 74, 489-494 (2001)) reported K$\_$D/ of 15 $\mu$M for the interaction between the wild-type and t-Htr by means of the change of M-decay rates. Therefore, this value should be the K$\_$D/ value for the interaction between M of the wild-type and t-Htr.

  • PDF

Correlation of the Rates of Solvolyses of Cinnamyl Bromide

  • Koo, In-Sun;Cho, Jun-Mi;An, Sun-Kyoung;Yang, Ki-Yull;Lee, Jong-Pal;Lee, I.
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권4호
    • /
    • pp.431-436
    • /
    • 2003
  • Solvolytic rate constants at 25℃ are reported for solvolyses of cinnamyl bromide (1) in binary mixtures of water with acetone, ethanol, methanol, methanol-d, and 2,2,2-trifluoroethanol. Product selectivities are reported for solvolyses of 1 in aqueous ethanol and methanol. Rate ratios in solvents of the same $Y_{Br}$ value and different nucleophilicity provide measures of the minimum extent of nucleophilic solvent assistance (e.g. $[k_{40EW}/k_{97TFE}]$Y = 2.88, EW = ethanol-water). With use of the extended Grunwald-Winstein equation, the l and m values are similar to the values of 0.43 and 0.88 obtained for the solvolyses of 1 using the equation (see below) which includes a parameter (I) for solvation of aromatic rings. The magnitude of l and m values associated with a change of solvent composition predicts the $S_{N1}$ reaction mechanism rather than an $S_{N2}$ channel. Product selectivities (S), defined by S = [ether product]/[alcohol product]×[water]/[alcohol solvent] are related to four rate constants for reactions involving one molecule of solvent as nucleophile and another molecule of solvent as general base catalyst. A linear relationship between 1/S and molar ratio of solvent is derived theoretically and validated experimentally for solvolyses of the above substrates from water up 75% 1/S = $(k_{wa}/k_{aw})$([alcohol solvent]/[water]) + $k_{ww}/k_{aw}$ alcohol-water. The results are best explained by product formation from a “free” carbocation intermediate rather than from a solvent-separated ion pair.

무정형 실리카로부터 Na-kenyaite의 직접합성 (Direct synthesis of Na-kenyaite from amorphous silica)

  • 권오윤;박경원;백우현
    • 한국결정성장학회지
    • /
    • 제9권1호
    • /
    • pp.70-73
    • /
    • 1999
  • $SiO_{2}/(NaOH+Na_{2}CO_{3})=2~20\;and\;H_{2}O/(NaOH+Na_{2}CO_{3})=200~250$인 몰 비 조건에서 무저어형 심리카를 $170~180^{\circ}C$, 48~120시간에 걸쳐 수열반응 시켰다. $SiO_{2}/(NaOH+Na_{2}CO_{3})=3~20$의 몰비 조건에서 Na-kenyaite 결정은 중간 생성물인 Na-magadiite 결정의 생성을 거치지 않고 무정형 실리카로부터 직접 형성되었다. $SiO_{2}/(NaOH+Na_{2}CO_{3})=3~10$ 이상의 몰 비에서는 항상 Na-kenyaite와 함께 무정형 실리카가 잔류물로 남아있었다. 전자 현미경으로 관찰한 Na-kenyaite와 함께 무정형 실리카가 잔류물로 남아있었다. 전자 현미경으로 관찰한 Na-kenyaite 결정 모양은 꽃잎 모양의 판들이 모여서 이루어진 둥근 다발과 같은 형태를 보여주었으며, 반응시간이 경과하면 결정 다발은 개개의 판들로 나누어진 보다 작은 조각들로 분리된 모양을 보여주었다.

  • PDF

Evaluation of Kinetic Parameters and Thermal Stability of Melt-Quenched BixSe100-x Alloys (x≤7.5 at%) by Non-Isothermal Thermogravimetric Analysis

  • Ahmad, Mais Jamil A.;Abdul-Gader Jafar, Mousa M.;Saleh, Mahmoud H.;Shehadeh, Khawla M.;Telfah, Ahmad;Ziq, Khalil A.;Hergenroder, Roland
    • Applied Microscopy
    • /
    • 제47권3호
    • /
    • pp.110-120
    • /
    • 2017
  • Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.