• 제목/요약/키워드: molar ratios

검색결과 301건 처리시간 0.024초

EFFECTS OF ACTIVATED CARBON ON GROWTH, RUMINAL CHARACTERISTICS, BLOOD PROFILES AND FEED DIGESTIBILITY IN SHEEP

  • Garillo, E.P.;Pradhan, R.;Tobioka, H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제8권1호
    • /
    • pp.43-50
    • /
    • 1995
  • This study was carried out to investigate the effects of activated carbon (AC) on growth, ruminal charateristics, blood profiles and feed digestibility in sheep, using roughage-based or concentrate-based diets. Twelve Suffolk breed of sheep of similar age and weight were distributed into 4 groups in a $2{\times}2$ factorial design. Two groups were fed a roughage-based diet with (R + AC) and without AC (R - AC), while the other two were fed a concentrate-based diet with (C + AC) and without AC (C - AC), respectively. The addition of 0.3% AC was based on dry matter of feed offered to animals. The incorporation of AC in roughage and concentrate based diets had no marked effects on feed intake, daily gain and feed conversion of the animals within experimental diets. The results obtained might be due to the low level of AC added in the diet. The animal on both concentrate-based diets were higher than the roughage-based diets in terms of daily gain and feed conversion ratio. However, it was observed that the animals provided with AC in the concentrate-based diet did not suffer from diarrhea and easily adjusted to high concentrate feeding. Further, the pH value for all diets before feeding was noted to be similar. After feeding, however, pH was shown to be higher in R + AC (p < 0.05) than in C + AC diet. Rumen protozoa number was decreased after feeding for both + AC diets, but in C - AC diet it was higher than in the roughage-based diets. For ammonia-nitrogen, C - AC was found to be higher than C + AC diet and the roughage-based diets before feeding. Total volatile fatty acid concentration, propionate and valerate molar ratios for both diets and time of collection were not affected. However, acetate, butyrate and valerate molar ratios were observed to be affected by diets and time of collections. The diets with AC increased (p < 0.05) before feeding for acetate molar ratio, but not different within diet, however, the roughage diets were found to be higher (p < 0.05) in acetate than the concentrate diet. In the blood parameters, the glutamic pyruvic transaminase (GPT), red and white blood cell (RBC, WBC) counts and packed cell volume (PCV) did not differ within and among the diets. Likewise, the WBC differential count in both diets with either - AC or + AC were similar in trend. However, lymphocyte count was noted to be increased in R + AC than the R - AC diet. The addition of AC in both diets did not affect nutrient digestibilities within diets.

고체산화물 연료전지용 디젤 자열개질기의 장기성능에 미치는 H2O/C와 O2/C 몰 비의 영향 (Effect of the Molar H2O/ and the Molar O2/C Ratio on Long-Term Performance of Diesel Autothermal Reformer for Solid Oxide Fuel Cell)

  • 윤상호;강인용;배규종;배중면
    • 전기화학회지
    • /
    • 제10권2호
    • /
    • pp.110-115
    • /
    • 2007
  • 고온형 연료전지인 고체산화물 연료전지(solid oxide fuel cell, SOFC)는 연료에 대한 유연성(fuel flexibility)이 높다. 따라서 높은 에너지 밀도를 가진 디젤을 개질하여 SOFC를 운전하는 것은 효과적인 방법이다. 하지만 디젤이 가지는 특성으로 인해 디젤 자열개질기(autothermal refromer)는 운전 시간에 따라 탄소 침적(carbon deposition) 현상이 발생하여 개질기의 성능이 쉽게 저감된다. 개질기 성능 저감 현상 때문에 개질 가스들 중에 탄화수소 생성량이 많아지며, 이는 SOFC 성능도 저감시킨다. 이러한 현상은 연료극에 공급되는 탄화수소가 야기하는 탄소 침적으로 사료된다. 본 연구에서는 탄화수소가 SOFC에 주는 성능 저감을 확인하였으며, 연료전지 성능 저감을 줄이기 위한 디젤 자열개질기 반응물들의 조건 선정($H_2O/C$$O_2/C$의 몰 비)을 통해 디젤 자열 개질기 특성을 살펴보았다. 특히 $H_2O/C=0.8$$O_2/C=3$인 디젤 자열개질 반응 조건에서 좋은 개질 성능을 확인할 수 있었다.

MgO-KH2PO4 몰비 변화에 따른 마그네시아-인산염 모르타르의 배합실험 (Tests on Magnesium Phosphate Composite Mortar Mixtures with Different Molar Ratios of MgO-to-KH2PO4)

  • 윤현섭;이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제17권3호
    • /
    • pp.211-217
    • /
    • 2017
  • 본 연구에서는 중성급 pH와 30 MPa 이상의 압축강도를 갖는 마그네시아-인산칼륨 복합체(Magnesia-potassium phosphate composites, MKPC) 모르타르의 배합설계를 위하여 마그네시아(MgO)와 인산칼륨($KH_2PO_4$)의 혼합 몰비($M_{mp}$)를 30.4에서 3.4로 변화하였다. MKPC 모르타르의 응결시간은 $M_{mp}$가 감소함에 따라 짧아졌다. 재령 28일 강도로 일반화된 강도 발현율은 $M_{mp}$가 7.9이하인 배합의 경우 재령 1일에서 50~61% 수준이었으며, 재령 3일에서는 60~73% 수준으로서 초기재령에서 빠른 강도발현성능을 나타냈다. MKPC의 수화생성물인 스트루바이트-K의 양은 $M_{mp}$가 감소할수록 증가하였는데, 이로 인해 거대공극 분포도 감소하였다. MKPC 모르타르의 목표로 했던 성능을 고려하면, $M_{mp}$의 값은 5.1 이하가 요구되었다.

Methyltrimethoxysilane과 Trimethylethoxysilane을 이용한 비불소계 발수 코팅 도막의 제조 (Preparation of Non-Fluorinated Water Repellent Coating Films Using Methyltrimethoxysilane and Trimethylethoxysilane)

  • 김동구;이병화;송기창
    • Korean Chemical Engineering Research
    • /
    • 제57권2호
    • /
    • pp.177-184
    • /
    • 2019
  • Methyltrimethoxysilane (MTMS)과 trimethylethoxysilane (TMES)을 전구체로 사용하여 비 불소계 발수 코팅 용액을 제조하였다. 이 코팅 용액을 냉연 강판 위에 스핀 코팅하고 열 경화시켜 발수 코팅 도막을 제조 하였다. 이 과정 중 코팅 도막의 소수성에 미치는 TMES/MTMS의 몰 비 영향이 연구되었다. 코팅 도막의 소수성은 접촉각 측정, 표면 형상 분석 및 적외선 분광법을 사용하여 연구되었다. TMES/MTMS의 몰 비를 0에서 30까지 변화 시켰을 때, 코팅되지 않은 냉연강판의 접촉각은 $30^{\circ}$인 반면에 TMES/MTMS의 몰 비가 1인 경우는 접촉각이 $104^{\circ}$로 크게 증가하여 발수성이 향상되었다. 또한 TMES/MTMS의 몰 비가 10, 15, 25, 30인 경우는 각각 접촉각이 $109^{\circ}$, $114^{\circ}$, $117^{\circ}$, $144^{\circ}$로 TMES/MTMS의 몰 비가 증가할수록 냉연강판의 접촉각이 점차 증가하는 경향을 보였다. 이때 코팅 도막의 소수성은 표면 거칠기의 증가와 코팅 표면에서의 메틸 성분의 함량 증가로 인해 향상되었다. 특히 TMES/MTMS의 몰 비가 30인 경우에는 TMES의 메틸기로 인한 발수성뿐만 아니라 표면 입자의 존재로 인해 전체적인 표면 거칠기가 크게 증가하였기 때문에 $144^{\circ}$의 초발수성을 나타내었다.

Effects of Ga Composition Ratio and Annealing Temperature on the Electrical Characteristics of Solution-processed IGZO Thin-film Transistors

  • Lee, Dong-Hee;Park, Sung-Min;Kim, Dae-Kuk;Lim, Yoo-Sung;Yi, Moonsuk
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권2호
    • /
    • pp.163-168
    • /
    • 2014
  • Bottom gate thin-film transistors were fabricated using solution processed IGZO channel layers with various gallium composition ratios that were annealed on a hot plate. Increasing the gallium ratio from 0.1 to 0.6 induced a threshold voltage shift in the electrical characteristics, whereas the molar ratio of In:Zn was fixed to 1:1. Among the devices, the IGZO-TFTs with gallium ratios of 0.4 and 0.5 exhibited suitable switching characteristics with low off-current and low SS values. The IGZO-TFTs prepared from IGZO films with a gallium ratio of 0.4 showed a mobility, on/off current ratio, threshold voltage, and subthreshold swing value of $0.1135cm^2/V{\cdot}s$, ${\sim}10^6$, 0.8 V, and 0.69 V/dec, respectively. IGZO-TFTs annealed at $300^{\circ}C$, $350^{\circ}C$, and $400^{\circ}C$ were also fabricated. Annealing at lower temperatures induced a positive shift in the threshold voltage and produced inferior electrical properties.

조사료의 종류와 사료 내 영양소 수준이 흑염소의 반추위 in vitro 발효성상과 메탄생성에 미치는 영향 (Effect of Different Forage Source and Nutrient Levels in Diet on in vitro Goat Rumen Fermentation and Methane Production)

  • 이진욱;김관우;류채화;이성수;이상훈;전다연;노희종;최낙진
    • 한국유기농업학회지
    • /
    • 제27권4호
    • /
    • pp.529-540
    • /
    • 2019
  • The present study investigated the effect of forage sources and their inclusion levels in diet on the rumen fermentation of Korea traditional goat. Timothy and alfalfa were used as forage sources. Forages were mixed with concentrate diet in different ratios. The ratios of forage to concentrate diets were varied to 1:9, 5:5 and 9:1. The rumen fluid of goat was gathered from slaughter house. Dry matter digestibility was decreased and methane production was increased as forage levels in diet was increased. When forage sources, timothy and alfalfa, were compared, groups with timothy showed greater methane production than the groups of alfalfa. Molar ratio of produced acetate and valerate were increased when forage level in diet was increased. In the case of propionate and butyrate, they were decreased as elevated forage levels in diet. The result of this study provided a basic information for rumen fermentation of Korean traditional goat and these information could be applied in the development of nutritional and feeding strategy.

Polymerization of Polyethylene Using Bimodal TiCl4/MgCl2/SBA-15/MCM-41

  • Moonyakmoon, Mattanawadee;Klinsrisuk, Sujitra;Poonsawat, Choosak
    • 한국입자에어로졸학회지
    • /
    • 제11권3호
    • /
    • pp.87-92
    • /
    • 2015
  • MCM-41 (Mobil Composition of Matter) and SBA-15 (Santa Barbara Amorphous) were used as a supported catalyst for ethylene polymerization due to their combination of large surface area and wide range of pore size distribution. The morphology of supports was used to control the morphology of the resulting polymer. Different molar ratios of Al/Ti were used for ethylene polymerization at $60^{\circ}C$ under atmospheric pressure. The effect of different mass ratios of MCM-41/SBA-15 and 1-hexene concentration on polymerization activity and polymer properties was investigated. The catalytic activity and the crystallinity reached the highest value at Al/Ti of 480. Upon incorporation of MCM-41 and SBA-15 into $MgCl_2/TiCl_4$ catalyst, the molecular weight and crystallinity of polyethylene were enhanced. The obtained polyethylene showed melting temperature between 130 and $135^{\circ}C$. The polyethylene with replication structure of support and bimodal MWD was expected.

Wet preparation of calcium phosphates from aqueous solutions

  • Lee, Byeong Woo;Hong, Il Gok
    • Journal of Ceramic Processing Research
    • /
    • 제20권6호
    • /
    • pp.655-659
    • /
    • 2019
  • Calcium phosphates such as HA (hydroxyapatite), β-TCP (tricalcium phosphate) and biphasic HA/β-TCP, were synthesized by wet chemical precipitation in aqueous solution combined with ball milling process. Nanosize powders of the calcium phosphates were synthesized using Ca(OH)2 and H3PO4. The effects of initial precursor Ca/P ratio (1.30, 1.50 and 1.67), ball milling process and post heat-treatment on the phase evolution behavior of the powders were investigated. The phase of resulting powder was controllable by adjusting the initial Ca/P ratio. HA was the only phase for as-prepared powders in both cases of Ca/P ratios of 1.50 and 1.67. The single HA phase without any noticeable second phase was obtained for the initial Ca/P ratio of 1.67 in the overall heat-treatment range. Pure β-TCP and biphasic calcium phosphate (HA/β-TCP) were synthesized from precursor solutions having Ca/P molar ratios of 1.30 and 1.50, respectively, after having been heat-treated above 700 ℃. The β-TCP phase has appeared on the pre-existing DCPD (dicalcium phosphate dihydrate) and/or HA phase. Dense ceramics having translucency were obtained at a considerably lower sintering temperature. The modified process offered a fast, convenient and economical route for the synthesis of calcium phosphates.

방향족/지방족 혼합 Diisocyanate를 포함하는 Polyurethane 분산체의 제조와 성질 (Preparation and Properties of Polyurethane Dispersions with Aromatic/Aliphatic Mixed Diisocyanate)

  • 김형석;노시태
    • 공업화학
    • /
    • 제20권3호
    • /
    • pp.258-265
    • /
    • 2009
  • Poly(tetramethylene glycol) (PTMG, Mw = 2000), dicyclohexylmethane-4,4'-diisocyanate $(H_{12}-MDI)$와 4,4'-diphenylmethane diisocyanate (MDI)의 이소시아네이트 혼합물, 그리고 음이온기로서 dimethylol propionic acid (DMPA)를 사용하여 프리폴리머 혼합법으로 음이온성 폴리우레탄 분산체(PUD)를 합성하였다. 프리폴리머의 중화제로서는 triethylamine (TEA)을, 그리고 프리폴리머의 가지연장제로는 ethylene diamine (EDA)를 사용하였다. DMPA의 몰비율과 혼합이소시아네이트에서 방향족 이소시아네이트의 함양이 PUD의 입자크기와 점도변화에 미치는 영향을 연구하였다. 그리고 또한 DMPA의 몰비율과 방향족 이소시아네이트 함양 변화에 따른 PUD 도막의 기계적 성질과 열적 성질에 대해서도 논의하였다. DMPA의 몰비율이 증가할수록 음이온성 PUD의 입자크기와 점도가 감소하였으나, 동일한 DMPA 함량에서는 이소시아네이트 혼합물 중 방향족 이소시아네이트의 함량이 증가 할수록 입자의 크기와 점도가 증가하는 경향을 나타냈다. 혼합 이소시아네이트의 몰비율이 일정할 때 PUD 도막의 인장강도는 DMPA의 함량이 증가함에 따라 증가하였으나, 신장율은 감소하였다. PUD 도막의 열분해 온도에 있어서, DMPA 함량에 대한 영향은 크게 나타났으나, 방향족 이소시아네이트 함양의 영향은 DMPA 함량이 낮은 조건에서는 상대적으로 크지 않았다.

Synthesis and Characterization of Derivatives of Dibutyl Sn(IV)-Ti(IV)-μ-Oxoisopropoxide with Schiff Bases

  • Kumar, Rajesh;Sharma, H.K.
    • 대한화학회지
    • /
    • 제56권1호
    • /
    • pp.54-57
    • /
    • 2012
  • New Schiff base derivatives of organoheterobimetallic-${\mu}$-oxoisopropoxide $[Bu_2SnO_2Ti_2(OPr^i)_6]$ have been synthesized by the thermal condensation ${\mu}$-oxoisopropoxide compound with Schiff bases in different molar ratios (1:1-1:4) yielded the compounds of the type $[Bu_2SnO_2Ti_2(OPr^i)_{6-n}(SB)_n]$ (where n is 1-4 and SB=Schiff base anion) respectively. The ${\mu}$-oxoisopropoxide derivatives have been characterized by elemental, spectral analysis (IR, $^1H$, $^{13}C$, $^{119}Sn$ NMR) and molecular weight measurement The studies reveal that the derivative compounds show monomeric nature. Further these are found less susceptible to hydrolysis as compared to parent compound and may prove excellent precursors for the mixed metal oxides.