• 한국연초학회지
• /
• 제17권2호
• /
• pp.149-159
• /
• 1995

The freeze drying rate was investigated under various conditions such as pressure and moisture contents in order to establish the optimum condition for expansion of the culled flue cured tobacco lamina. The optimal pressure in the chamber to maintain the heat and mass transfer was about 0.8torr, When the moisture contents of sample was 50-60%, expanding rate was the optimum condition and the rate was 67-76%. As the thickness of the sample layers was increased, drying-rate was decreased conversely and this result seemed to be due to decline of heat and mass transfer coefficients. Differences with the position of its stalk were also observed in drying rate, and low stalk position leaves of 5 and 3 was the fastest. Key words : freeze drying, Popping, expansion tobacco.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.180-185
• /
• 1998

Microwave polarimetric backscattering from a various types of grassland canopies has been analyzed by using the first-order radiative transfer theory in this paper. Leaves in the grassland are modeled by rectangular resistive sheets, which sizes (widths and lengths) and orientations (elevation and azimuth angles) are randomly distributed. Surface roughness and soil moisture of the ground plane under the grass canopy is considered in this computation. The backscattering coefficients of grasslands are computed for different radar parameters (angles, frequencies and Polarizations) as well as different canopy Parameters (size and orientation distributions of leaves, canopy depth, moisture contents of leaves and soil, rms height and correlation length of soil surface). A radar system for 15GHz has been fabricated and used for measurement of the scattering coefficient from a grass canopy. The computation result obtained by the scattering model for the grass canopy is compared with the measurements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.31-32
• /
• 2020

Concrete changes its internal moisture distribution depending on the external environment, and changes in the condition of the material's interior over time affect the performance of the concrete. These effects are closely related to the long-term behavior and durability of concrete, and the degree of deterioration varies from climate to climate in each region. In this study, we use actual climate data from each region with distinct climates. A multi-physical analysis based on the method was conducted to predict the difference and degree of deterioration rate by climate.

• Agricultural and Biosystems Engineering
• /
• 제6권1호
• /
• pp.27-33
• /
• 2005

Soy protein meat analog was produced using a twin-screw extruder attached with a cooling die. Heat transfer analysis was performed for cooling dies with various die sizes at the four different moisture contents of feed during extrusion process. The experimental design consisted of two cooling die widths (30 and 60 mm), three cooling die lengths (100, 200, and 300 mm), four product moisture contents (71.2, 67.0, 61.6 and 55.8%), and water and water plus ethylene glycol as cooling material. When water was used as cooling medium, the values of equivalent overall heat transfer coefficient $(U_e)$ for each die width of 30 and 60 mm were in the range of 187.0 - 341.4 and $358.5-191.6W/m^2^{\circ}C$ depending on the size of die length. Convective heat transfer coefficients between cooling water and inside die wall of cooling channel $(h_c)$ for both die widths of 30 and 60 mm were 588.5, 416.1, and $339.8W/m^2^{\circ}C$ for each die length of 100, 200, and 300 mm. Convective heat transfer coefficients between product and inside die wall of product channel $(h_p)$ for each die width of 30 and 60 mm were in the range of $434.6-888.1W/m^2^{\circ}C$ and $460.7-1014.5W/m^2^{\circ}C$ depending on the size of die length. When water plus ethylene glycol was used as cooling medium, the values of $U_e$ were in the range of $143.9-319.6W/m^2^{\circ}C$ and $177.8-332.7W/m^2^{\circ}C$ for each die width of 30 and 60 mm depending on the size of die length.

• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.11-15
• /
• 2011

폴리머의 흡습문제를 해석하기 위해 흡습확산 지배방정식과 열전달 방정식을 고찰하였다. 두 방정식의 동일 한 형식의 편미분방정식이기 때문에 상사의 법칙을 적용하여 물체가 등온 하중조건을 받고 있을 때 단일 매질의 확산문 제를 상용유한요소코드에 의해 수치적으로 해석하였다. 여러 소재로 구성된 매체는 흡습질량이 접착면에서 불연속 특성 을 갖기 때문에 확산해석에 상사법칙을 직접적으로 적용할 수 없으나 흡습관련 소재 특성이 온도만의 함수인 소재로 구 성된 매체에서 흡습확산 문제는 접착면에서 연속성을 가지고 있는 압력비를 고려함으로써 해석하였다. 실리콘-비전도성 수지 접합체의 측정된 흡습 변화량은 접합면을 경계조건으로 하고 단일 매체에 대한 해석 결과와 매우 근접한 결과를 보였으나, 복합체로 해석한 결과는 흡습시간이 경과할수록 점점 큰 오차가 발생하였다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.1371-1372
• /
• 2003

직물에서 구조적 요인이 쾌적성과 연관된 유체전달 특성들에 미치는 영향을 연구하였다. 고려된 구조변수는 직물을 구성하는 실의 구성성분 그리고 꼬임수이다. 측정한 쾌적성과 연관된 물성으로 수분 흡수성, 수분 증발성, 그리고 수분 투과성이다. 이들 물성은 고려된 구조 인자들에 의해 큰 영향을 받았다. 결과들에 대한 객관적 분석과 이해를 위해 실에서 접촉적각, 직물에서 모세관 흡수 곡선, 그리고 기공크기를 측정하였으며, 또한 기존 이론들을 수정한 모델을 도입하여 모사 설명하였다.

• 한국산업융합학회 논문집
• /
• 제8권1호
• /
• pp.47-55
• /
• 2005

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 2 to 50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of agricultural products. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the agricultural products. Energy for moisture evaporation is supplied by the infrared radiant energy. The optimum temperature and drying time for the best drying conditions of changing the red peppers with the moisture content of 18% and the restore rate of 80~85% are $80^{\circ}C$ and 44 hours. The performance of radiation tubes coating with the radiation paint developed in this research has the energy of $2.27{\times}103W/m^2{\mu}m$, $150^{\circ}C$ within the scope of radiation wave length of $2{\sim}30{\mu}m$ and has the radiation 0.92~0.93, which is superior to the general radiation tubes. The extinction coefficient according to the band pass filter using the 4 flux theory ha higher dependability on wave length, accounting for $2{\sim}17{\mu}m$ and $5{\times}105{\sim}106m-1$. A comparison between the theoretical energy transfer whose figures are interpreted according to 4 flux theory and the experimental energy transfer of far infrared dryer leads to the findings of the agreement less than 5%.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.404-408
• /
• 2009

The liquid desiccant air-conditioning system has been proposed as an alternative to the conventional vapor compression cooling systems to control air humidity. The complete system of liquid desiccant air-conditioning system is consisted two main components those are humidifier (regeneration) and dehumidifier. Humidifier part is connected to the load when summer season which is the air condition is hot and humid have to be turned into comfort condition on human. This paper purpose is performances study of air flow rate effect on a structured packed tower on cooling and dehumidifier system using liquid lithium chloride as the desiccant. Experimental apparatus used in this present study is consisted of three components those are load chamber, packed tower and chiller. Load chamber’s volume is $40m^3$, and packed tower dimension is cubic with length 0.4m occupied with packed column. Totally, 15 experimental has done using 5 times repeat on each variable of air velocity that varying on 2m/s, 3m/s and 4m/s with other conditions are controlled. Air inlet initial temperature and relative humidity are set respectively on $30^{\circ}C$ and 52%, desiccant flow rate is 0.63 kg/s, desiccant temperature is $10^{\circ}C$ and desiccant concentration is 0.4. The result of this study shows that averagely, the moisture removal rate and the heat transfer rate are influenced by the air velocity. Higher air velocity will increase the heat transfer and decreasing the moisture removal rate. At adiabatic condition the air velocity of 2 m/s respectively is having the higher moisture removal rate acceleration then the air velocity of 3m/s and 4 m/s until the steady state condition.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.352-362
• /
• 2012

Mass transfer behavior in wood was estimated through its microscopic structure. The diffusion coefficients which were decided by theoretical equations are influenced by different anatomical properties of wood. From the experiment, the moisture flux was linear to the square root of time. The diffusion coefficients had a regular tendency during the time elapse. During the modeling, it is necessary to understand the limitation of parameters and consider the particular situation to be simulated. In hardwood, because the apertures were not considered, tangential mass transfer simulation was totally different from experiment. As a result, a hardwood model design should consider the apertures which are even on the fiber walls.

• KIEAE Journal
• /
• 제10권4호
• /
• pp.75-80
• /
• 2010

Generally, ground-source heat pump (GSHP) systems have a higher performance than conventional air-source systems. However, the major fault of GSHP systems is their expensive boring costs. Therefore, it is important issue that to reduce initial cost and ensure stability of system through accurate prediction of the heat extraction and injection rates of the ground heat exchanger. Conventional analysis methods employed by line source theory are used to predict heat transfer rate between ground heat exchanger and soil. Shape of ground heat exchanger was simplified by equivalent diameter model, but these methods do not accurately reflect the heat transfer characteristics according to the heat exchanger geometry. In this study, a numerical model that combines a user subroutine module that calculates circulation water conditions in the ground heat exchanger and FEFLOW program which can simulate heat/moisture transfer in the soil, is developed. Heat transfer performance was evaluated for 3 different types ground heat exchanger(U-tube, Double U-tube, Coaxial).