• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.357-364
• /
• 2014

This study aimed to determine effects of the use of water-retention additive, hydrophilic polymer, for extensive green roofs on growth of Juniperus chinensis var. sargentii and Euonymus fortunei 'Emerald and Gold' for woody plants, and Carex kobomugi and Carex pumila for herbaceous plants. Five different contents of hydrophilic polymer including 0% (Control), 1.0%, 2.5%, 5.0%, and 10% (polymer: medium (w/w), dry weight basis) were added to each of the container filed with a 100 kg of growth medium. Ten of plants were transplanted in each of square container ($1m(L){\times}1m(W){\times}0.3m$ (H)) built on the roof platforms in randomized complete block design in the $20^{th}$ of May, 2013. In results, excessively high volumetric soil water content, about 97-98%, was found in the substrate under elevated hydrophilic polymer concentration of at least 2.5%, during the entire growing period. The moisture content of the substrate containing 1.0% of hydrophilic polymer was higher about 20% in the range between 70% and 80%, compared tho that of Control substrate in the range between 50% and 60%, for 27 days after transplanting prior to abundant rainfall, indicating that the application of hydrophilic polymer to the extensive green roof substrate is effective to eliminate drought condition by retaining water in the substrate. Euonymus fortunei 'Emerald and Gold' and Carex kobomugi resulting in higher plant growth with 2.5% than those of the other treatment plants. Juniperus chinensis var. sargentii was observed the highest growth under 1.0% hydrophilic polymer treatement, and Carex pumila was founded the best growth with Control respectively. Plants that grown in both the 1.0% and 2.5% hydrophilic polymer survived all, while the plants that grown in the 5.0% and 10% hydrophilic polymer died after 3 months. These results suggest that advantage of the addition of hydrophilic polymer may be greater in drought-tolerant plants, but the mixture proportion of hydrophilic polymer should be determined according to the different features of the plant species being grown.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.342-349
• /
• 2018

In this study, the physicochemical properties, emulsifying capacity, moisture content and cytotoxicity of the composite material produced by transesterification reactions of the olive oil (olive oil esters) were investigated for cosmetic applications. Olive oil esters with short (S) and long (L) reaction times were studied. From the TLC-image analysis, composition ratios of the olive oil esters S were found to be 5.2, 24.1, 46.4, and 21.9% for mono-, di-, tri-glyceride, and fatty acid ethyl ester, respectively. Those of the olive oil esters L were 4.1, 24.7, 40.6, and 28.8% for mono-, di-, tri-glyceride, and fatty acid ethyl ester, respectively. The iodine value, acid value, saponification value, unsaponified matter, refractive index, and specific gravity were determined and purity tests were also carried out and normalized to establish standards and testing methods for using olive oil esters in cosmetics. To evaluate their emulsifying capacities, the O/W emulsion was prepared without surfactants and the formation of the emulsified particles were confirmed. After 5 days of applying the olive oil esters to human skin, the skin moisture retention was improved by 13.1% from the initial state. For the evaluation of toxicity on human skin cells, the olive oil esters showed 90% or more of the cell viability at $0.2-200{\mu}g/mL$. These results suggested that olive oil esters can be applied as natural/non-toxic ingredients to cosmetics industries.

• Journal of Life Science
• /
• v.30 no.7
• /
• pp.606-613
• /
• 2020

This study investigated the effect of olive oil substitution ratio on physicochemical quality of pork patty. Five treatments were performed as follows: control (T0, 20% pork fat), T1 (pork fat 15% and olive oil gel 5%), T2 (pork fat 10% and olive oil gel 10%), T3 (pork fat 5% and olive oil gel 15%), and T4 (olive oil gel 20%). The moisture increased and fat amount was decreased in proportion to olive oil substitution ratio. The L^* and a^* values were highest levels in raw and cooked pork patty of T0, and the b^* value was highly enhanced in of cooked pork patty of T4. The water holding capacity, moisture and fat retention were significantly increased, and the cooking loss, diameter reduction and shrinkage ratio were decreased by olive oil substitution ratio. The hardness, springiness and chewiness showed the highest level in T4, and the cohesiveness and gumminess were highest in T0. The reduction ratio of cholesterol in T1, T2, T3 and T4 were 13.8%, 21.6%, 34.5% and 49.0%, respectively, indicating that the content was lowest level in T4. The palmitic acid was the most abundant saturated fatty acid, and the oleic acid was the most abundant unsaturated fatty acid. The unsaturated fatty acid of pork patty was increased in proportion to olive oil substitution ratio. Therefore, the olive oil gel substitution of low-fat pork patty results in a positive effect on the physicochemical qualities due to reduced cholesterol and saturated fatty acids.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.335-342
• /
• 2023

To achieve self-sufficiency in domestic wheat (Triticum aestivum L.), an increase in high-quality wheat production is essential. Given Korea's limited land area, the utilization of cropping systems is imperative. Wheat is compatible with a double cropping system along with rice, soybeans, and corn. Data on alterations in wheat quality following summer crop cultivation is required. This study investigated the impact of cultivating preceding crops such as rice, soybeans, and corn in a wheat cropping system. The analysis focused on the influence of these preceding crops on wheat growth, quality, and soil characteristics, elucidating their interrelationships and impacts. While there were no differences in growth timing and quantity during wheat growth, a significant variance was observed in stem length. Protein content, a key quality attribute of wheat, displayed variations based on the intercropped crops, with the highest increase observed in wheat cultivated after soybeans. Soil moisture content also exhibited variations depending on the intercropping system. The wheat-rice intercropping system, which requires soil moisture retention, resulted in greater pore space saturation in comparison to other systems. Moreover, soil chemical properties, specifically phosphorus and calcium levels, were influenced by intercropping. The highest reduction in soil phosphorus content occurred with soybean cultivation. These findings suggest that intercropping wheat with soybeans can potentially enhance wheat quality in domestic varieties.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.27-38
• /
• 2009

To investigate the feasibility of refuse derived fuels (RDFs) combined of sewage sludge and combustible wastes such as substitutive fuels instead of a stone coal, several different RDFs made with different mixtures of sewage sludge and combustible wastes were analyzed by various experiments. The combustion characteristics for the RDFs were investigated by analyzing fuel gases, and heating values were also measured by a bomb calorimeter. The fundamental properties such as moisture contents, ratios of combustible materials, amounts of ashes, heavy metals, ratios of each chemical elements and heating values were analyzed in accordance with mixing ratios of wt(%) for researching the characteristics of the RDFs. $RDF_{k-1}$ was made of mixing materials which were dried sewage sludge, food wastes and combustible wastes. $RDF_{k-2}$ was made of mixing materials which were peat-moss, tar and sewage sludge. Combustion experiments were carried out at the optimal conditions which were m=2 under air-fuel condition and $850^{\circ}C$. The retention times in the combustor were set at 5, 10 and 15minutes. 50 g of RDFs was put in the combustor for each experiments. The ranges for heating values of $RDF_{k-1}$ with different mixing ratios were from 6,900 kcal/kg to 8120 kcal/kg. The ranges for heating values of $RDF_{k-2}$ with different mixing ratios were from 4,014 kcal/kg to 8,050 kcal/kg. As a result of this study, the heating values, moisture contents, components of chemical elements and mixing ratios of the materials in RDFs had big effects on the efficiency of the combustion. In $RDF_{k-1}$, the higher amounts of combustible wastes in the mixtures, the higher heating values, concentrations of $C_xH_y$ and amounts of ashes were produced. In $RDF_{k-2}$, the higher tar amounts in the mixtures caused the higher heating values, amounts of ashes, concentrations of CO gas and CxHy.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.4
• /
• pp.3-57
• /
• 1985

This research was conducted to examine the feasibility of developing fire retardant particleboard and complyboard. Particleboard were manufactured using meranti particle(Shorea spp.)made with Pallmann chipper, and complyboard meranti particle and apitong veneer (Dipterocarpus spp.). Particles were passed through 4mm (6 mesh) and retained on 1mm (25 mesh). Urea formaldehyde resin was added 10 percent on ovendry weight of particle. Face veneer for complyboard was 0.9, 1.6 and 2.3mm in thickness and spread with 36 g/(30.48 cm)$^2$ glue on one side. Veneers were soaked with 10 percent solution of five fire retardant chemicals (diammonium phosphate, ammonium sulfate, monoammonium phosphate, Pyresote and Minalith), and particles with 5, 10, 15 and 20 percent solution of five chemicals. Particleboard and complyboard were evaluated on physical and mechanical properties, and fire retardancy. The results obtained were summarized as follows. 1. Among five fire retardant chemicals treated to particleboard and complyboard, the retention of ammonium sulfate in 5 percent solution showed the lowest as 1.39 kg/(30.48 cm)$^3$ exceeding the minimum retention of 1.125 kg/(30.48 cm)$^3$ recommended by Forest Products Laboratory and Koch. 2. Particleboard and complyboard treated with diammonium phosphate showed higher modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength and screw holding power than those with the other chemicals. 3. MOR and MOE of complyboard treated with fire retardant chemicals were greater than those of fire retardant particleboard. 4. Thickness swelling of fire retardant complyboard was lower than that of fire retardant particleboard. 5. The moisture content of the boards treated with Pyresote and Minalith increased and with monoammonium phosphate reduced. 6. Fire retardant particleboard showed no ignition, and fire retardant complyboard started ignition, but time required to ignite was prolonged comparing the controlboard. Complyboard with only shell veneer treated showed ignition and lingering flame, but lingering flame time was shorter than controlboard. Complyboard with treated both core and veneer showed ignition but not lingering flame. 7. Flame length, carbonized area and weight loss were smaller than controlboard but had no significant difference among chemicals treated. 8. Temperature of unexposed surface of fire retardant particleboard was lowered with the increasing concentration of five chemicals. 9. Temperature of unexposed surface of fire retardant particleboard was lowered with the highest in Pyresote and the lowest in Minalith. 10. Temperature of unexposed surface of fire retardant complyboard was lower than that of controlboard.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.20-26
• /
• 2010

This study was conducted to reclassify Donggui series based on the second edition of Soil Taxonomy and to discuss the formation of Donggui series in Jeju Island. Morphological properties of typifying pedon of Donggui series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has very dark grayish brown (10YR 3/2) silt loam A horizon (0~17 cm), gravelly very dark grayish brown (10YR 3/2) silt loam BA horizon (17~42 cm), gravelly very dark grayish brown (10YR 3/2) silty clay loam Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay Bt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay Bt3 horizon (105~150 cm). It is developed in lava plain and are derived from basalt and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85% phosphate retention, and higher bulk density than 0.90 $Mg/m^3$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol and Inceptisol. It has udic soil moisture regime, and can be classified as Udalf. Also that meets the requirements of Typic Hapludalf. It has 18-35% clay at the particle-size control section, and have thermic soil temperature regime. Therefore Donggui series can be classified as fine loamy, mixed, thermic family of Typic Hapludalfs, not as fine silty, mixed, thermic family of Dystric Eutrudepts.

• Korean journal of food and cookery science
• /
• v.1 no.1
• /
• pp.74-81
• /
• 1985

For this research, the Atka-fisher which are used commonly in many homes for baking and broilling were broiled by an iron baking method, a pan baking method, a grill baking method and a microwave baking method respectively after 20 hours salting with 3% salt concentration of fish muscle weight. This thesis has an intention of appreciating the tastes according to each baking method through a sensory test, of examining the corelation between the change of texture measured by Rheometer and a sensory test and of comparing the changes of chemical component of the fish. The results were as follow: 1. The appearance of the broiled Atka-fish maintained a good appearance by the iron baking method and the grill baking method. In the color, the iron baking method and the grill baking method by direct :fire resulted a good score too. In the flavor, there was a significant difference between the grill baking method and the microwave baking method while there was no difference between the iron baking method and the pan baking method. The result of tenderness showed that the pan baking method has the highest score. Difference between the iron baking method and the pan baking was not significant. There was no difference in tenderness between the grill baking method and the microwave baking method. The iron baking method showed-the highest score in juciness and the microwave baking method stowed the highest score in acceptability however the differences were not significant. 2. As a result of the measurement of the texture by Rheometer, the iron baking method and the grill baking method showed higher score than other methods in hardness and chewiness. In springiness and cohesiveness, there was no significant difference among methods. As a result of the measurement of the texture by Rheometer, the corelation with a sensory test was considered to be low. 3. After broil, the cooking retention was the highest in the pan baking method and the moisture content was the highest in microwave baking method. Nitrogen content was the highest in the iron baking method. Fat content was the highest in the iron baking method, followed by the grill baking method, the pan baking method, and the microwave baking method. Free amino acid content was the highest in the iron baking method, followed by the grill baking method, the pan baking method and the micro-wave baking method.

• Journal of Aquaculture
• /
• v.8 no.4
• /
• pp.261-269
• /
• 1995

A practical control diet was prepared and compared with raw fish ($80\%$ frozen horse mackerel + $20\%$ commercial binder meal) and moist pellet ($50\%$ frozen horse mackerel + $50\%$commercial binder meal) diets to develop a practical diet formulation for Korean rockfish (Sebastes schlegeli). Korean rockfish averaging 68.5g were fed with the three experimental diets for 11 months. Final average body weight was approximately 330g and showed no significant difference between fish groups (P>0.05). Feed efficiency of fish from control diet was significantly lower than those of fish from raw fish and moist pellet diets (P<0.05). Protein and lipid retention efficiency of fish ranged $26.9-28.8\%$ and $86.5-110.2\%$, respectively, without any significant difference between the different diets. At the end of the experiment, chemical composition for the various parts of fish body and flesh quality of the raw fish were examined. The data showed that there was no significant difference between fish from the different diet groups for moisture, protein and lipid contents of whole body, liver, and dorsal muscle. Also, thirty three panelists did not find any difference in color, smell, texture, and taste of the raw fish flesh. These results suggest that Korean rockfish can be cultured with a laboratory practical feed without any negative effects on growth, nutrient utilization, chemical composition of fish, and quality of raw fish. Therefore, the next step in developing practical feed is to modify the control diet for improving fish performance and reducing feed cost.

• Journal of Nutrition and Health
• /
• v.15 no.4
• /
• pp.301-312
• /
• 1982

A series of growing and digestion trials was conducted using Sprague- Dawley weanling male rats in order to determine the effects of two protein sources (casein and ISP (isolated soyprotein) ), three protein levels (10, 20 and 30%), and two feeding patterns (ad libitum and meal feeding) on the growth, protein and energy metabolism, and body composition of rats. The total energy level of experimental diets was kept constant in 3,600 kcal ME /kg diet. The results were as follows : 1) The amount of food intake and the weight gain of meal-fed group were lower than those of ad libitum group. Though the intake of meal-fed group on 20 and 30% casein diet was only 85% of ad libitum group, it was able to gain as much as ad libitum group. 2) There were no significant differences in the food efficiency ratio (FER) and the energy efficiency (weight gain per 100 kcal GE intake) between ad libitum and meal feeding group. The FER and the energy efficiency of 20 and 30% casein diets of meal-fed group were greater than those of ad libitum group. 3) Though the gross energy intake (GE ), the digestible energy (DE) and the metabolizable energy (ME) tended to be lower at meal-fed group, the DE/GE and the ME/GE ratios for meal-fed group were the same as those for ad libitum. 4) Though meal- fed group fed less amount of nitrogen than ad libitum group, there were no differences in nitrogen balance and the retention of rats among the treatments. Actually meal-fed group retained more nitrogen than ad libitum group at the levels of 20 and 30% dietary protein. 5) After growing and digestion trials, the body composition of rats was constant among all treatments. Significantly high negative correlation coefficient (r = -0.77) was found between the body fat content and the body moisture content. Consequently, this study suggests that meal- fed group on 20 and 30% casein diets has shown more effective utilization of the ingested food and energy than ad libitum group, and increasing tendency of weight gain and the body fat deposition. Those influences of meal feeding pattern in rats were more effective on the casein diet than on the ISP diet.