• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.161-168
• /
• 2018

In this study, IT based traceability system which is able to measure weight and moisture content of grain in the post-harvest process of intake, drying, storage and milling was developed in RPC(Rice processing complex). Measured information of weight, moisture content, yield, loss and quality was saved in the DB sever. Simultaneously, lot No. was generated and connecting to quality and traceability information. Also, automatic control system with MMI(Man Machine Interface) and yield and inventory control system(YICS) for grain was developed for the traceability system by applying the TCP/IP communication. In addition, simulation of system was performed for evaluation in RPC.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.113-121
• /
• 2011

River sand has generally used for the backfill material of underground power cables. The thermal resistivity of it has $150^{\circ}C$-cm/Watt in wet condition and more than double in dry condition. The final goal of this study is to find the backfill material which has a small change in thermal resistivity with various water contents, for example thermal resistivity is $50^{\circ}C$-cm/Watt and $100^{\circ}C$-cm/Watt in wet and dry conditions respectively. In this study it is presented that the comparison of thermal resistivity using stone powder, crush rock, weathered granite soil and Jumunjin sand as well as river sand in the needle method regarding water content, dry unit weight and particle size distribution. As a result, the thermal resistivity of a material is minimized when they have maximum dry unit weight at optimum moisture content and maximum density by appropriately mixing materials for particle size distribution. Therefore thermal resistivity characteristics should be considered two factors: one is the difference between natural dry condition and dry state after optimum moisture content, and the other is the difference between unit weight of raw material and maximum dry density.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.382-398
• /
• 2017

This study was conducted to identify the potential of Quercus mongolica (QUM), Pinus densiflora (PID) and Pinus rigida (PIR) as a raw material for pellet production. Larix kaempferi (LAK), which has mostly been used for pellet production in Korea, was also used as a control. All specimens contained very minimal amounts of sulfur and chlorine. Ash content of LAK was the lowest, followed by PID, PIR and QUM. For the size distribution, the mass fraction between 0.42 mm and 0.25 mm was the highest in PIR. Most fuel characteristics of the produced wood pellets improved with the use of 12% moisture content (MC) particles and the increase of the ratio of length to diameter of a hole in flat-die (L/D ratio). When the MC, bulk density and durability of QUM, PID, PIR and LAK pellets was compared with the standards of the KFRI and ISO, the use of wood particles of 12% MC and flat-die with an L/D ratio of 5.00 for PID particles are suitable for high-quality pellets in the aspects of all fuel characteristics. For PIR and QUM, further work is needed to seek the optimum conditions for the production of high-quality and durable pellets.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.5
• /
• pp.423-429
• /
• 2001

Process optimization of milling and puffing condition of the typical varieties of wheat such as HRS, ASW, and SW were studied. Distibution of optimal milling size of 8 mesh-on was more than 90% after milling of three wheats. That of HRS was the highest, 78%, and that of SW and ASW were pretty high, above 75%. Moisture content of three wheats was between 10∼12%, and protein content which are important for texture profile and puffing was 12.68%, 13.59%, and 11.82% for SW, HRS, and ASW, respectively. Puffing was optimal of 7 kg/$\textrm{cm}^2$ heating pressure for SW, and 5 kg/$\textrm{cm}^2$ lot HRS and ASW when the puffing process was pursued at 14.5 ∼15.0 kg/$\textrm{cm}^2$ steam pressure. Moisture content decreased from 11∼l3% to 5.6∼6.0% after puffing. Bulk density of SW, HRS, and ASW was 0.0441, 0.0523, and 0.0460, respectively. Size distribution of HRS was 82.4% after Puffing. Press strength of HRS was high, 51.0%, and texture of HRS was crispy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.328-332
• /
• 1994

The purpose of present paper is to compare and analyze the quality of imported Chinese products with the Korean local products in terms of proximate composition, character of external appearance , ingredient composition of dried bracken , dried radish cubers, meju , dried pollack, dried mussel , and dried brown seaweed(Undaria puinnatidifida) which were imported between Oct., and Dec. 1992 and distributed in the market. Moisture recovery of dried products resulted in changed shape and incomplete moisture recovery due to an excessive drying in consideration of hygroscopic property in the course of distribution. The amounts of water soluble brown pigment were two times greater in Korean dried pollack and bracken than those of Chinese products. The content of volatile basic nitrogen (VBN) were twice in Chinese dried pollack, and this may be due to foregin odor from a long transport time and distribution process. The contents of aflatoxin in Korean products were not detectable and these of Chinese products were 5 $\mu\textrm{g}$(%) in dried pollack, bracken and radish cuber. the remaining agricultural chemicals were not detectable in all products. Because of poor technique and facilities, the external appearance of Chinese products especially dried mussels and dried pollack were not uniformed in size and color. Discoloration and foregin substance such as hair, dust were checked , Korean products were mostly packed in small size in PP or bag, and Chinese products were packed in bulk size and distributed as a bulk.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.173-183
• /
• 2015

The aim of this study was to develop a soil moisture simulation model equipped with meteorological data enhanced by WRF (Weather Research and Forecast) model, and this soil moisture model was applied for quantifying soil moisture content and irrigation requirement. The WRF model can provide grid based meteorological data at various resolutions. For applicability assessment, comparative analyses were conducted using WRF data and weather data obtained from weather station located close to test bed. Water balance of each upland grid was assessed for soils represented with four layers. The soil moisture contents simulated using the soil moisture model were compared with observed data to evaluate the capacity of the model qualitatively and quantitatively with performance statistics such as correlation coefficient (R), coefficient of determination (R2) and root mean squared error (RMSE). As a result, R is 0.76, $R^2$ is 0.58 and RMSE 5.45 mm in soil layer 1 and R 0.61, $R^2$ 0.37 and RMSE 6.73 mm in soil layer 2 and R 0.52, $R^2$ 0.27 and RMSE 8.64 mm in soil layer 3 and R 0.68, $R^2$ 0.45 and RMSE 5.29 mm in soil layer 4. The estimated soil moisture contents and irrigation requirements of each soil layer showed spatiotemporally varied distributions depending on weather and soil texture data incorporated. The estimated soil moisture contents using weather station data showed uniform distribution about all grids. However the estimated soil moisture contents from WRF data showed spatially varied distribution. Also, the estimated irrigation requirements applied WRF data showed spatial variabilities reflecting regional differences of weather conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.194-199
• /
• 2024

Accidents due to aircraft fuel defects rank in the top 13 of the 34 accident types described by CAST-ICAO Common Taxonomy Team(CICTT). Aircraft accidents occur because of the inflow of moisture or pollutants depending on the distribution process and storage environment. To confirm the change in physical properties of the aircraft oil stored for a long time, we stored JET A-1 aircraft oil in a metal can to observe the change after six months. We confirmed that the aircraft oil stored for a long time satisfied the quality standards, and the stability of the fuel oil was high. However, in scenarios in which aircraft oil is stored separately on ships, onshore storage facilities, oil fields, etc., owing to the nature of missions, such as in marine police aircraft, the inflow of moisture or pollutants may likely occur due to changes in the internal and external environment. In addition, pollutants can be analyzed using existing tests and distillation properties, but for moisture, domestic and international standards and domestic laws determine the moisture separation ability of aircraft oil through the water separation index, but the moisture content is not analyzed. Therefore, aviation safety must be secured by adding quality control standards for moisture content and performing revisions to uniformize domestic and international standards and laws.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.3
• /
• pp.46-59
• /
• 1980

This study was conducted to obtain the most effective distribution of grain size and the optimum lime content for lime-soil stabilization. To achieve the aim, the change of consistency, the characteristics of compaction and unconfined compressive strength were tested by adding of 0, 4, 6, 8, 10 and 12 percent lime by weight for all soils adjusted by given ratios of sand to clay. The results obtained were as follows; 1. There was a tendency that the plasticity index of lime-soil mixture was decreased by increasing the amount of lime, whereas the liquid limit was varied irregularly and the plastic limit was increased. 2. With the addition of more lime, the optimum moisture content of lime-soil mixture was increased, and the maximum dry density was decreased. 3. The optimum lime content of lime-soil mixture was varied from soil to soil, and the less amount of small grain size, the less value of optimum lime content. 4. The optimum distribution of grain size for lime-soil mixture was in the soil, having the ratio of about 60 percent of cohesive clay and about 40 percent of sand by weight. 5. In the soil having fine grain size, the effect of curing appeared for long periods of time, whereas the increasing rate of unconfined compressive strength was great on the soil of coarse grain size in the earlier stage of curing period.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.52-61
• /
• 1991

In this paper, the difference of the property of absorption and desorption for five species in semi-steady state are studied. The species used are listed in Table 1 and the dimension of specimen was $8\times8{\times}T$(Tangential direction)cm and tested in various conditions. A change of average moisture content with time were measured in each cycles. The results obtained are summarized as follows. When the relative humidity in air was maximum or minimum, the distribution of moisture In wood of all specimens were illustrated by exponential curves of decrease or increased from lace 10 center of wood. From the consideration of coefficient of decrease(C), the amount of moisture change of spruce was larger than the others. The pheonomenon was considered no relation to the specific gravity in air dry, but the wood structures. The velocity of the absorption and desorption for species decreased in the order spruce(Picea sitchensis) neodobam(Fagus crenata), solsong(Tsuga heterophylla), meranti(Shorea sp.) and kaesoo(Cercidiphyllum japoicum). In case of constant temperature and water vapor pressure is changed. the amount of absorbed moisture was larger than that of constant water vapor pressure and temperature vaned. In this fact, it is considered that the property of sorption of wood is strongly influenced by vapor pressure gradient than temperature gradient.

• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.703-712
• /
• 1998

Physicochemical factors, microbial population size and the properties of the bacterial isolates were estimated to find out the nature of soil ecosystem of Mt. Nam. Samples were obtained from the surface layer of soils on which specific plant community is developed. Average content of moisture and organic matter of the soils were 21.6% and 17.3%, respectively. These values were similar to those of developing forest soils, but were slightly lower than those of climax ecosystem such as Piagol in Mt. Chiri. Chiri. Content of phosphate was higher than those of other forest soils. The population size of soil bacteria ranged from 27.4 to 195.8 ${\times}\;10^5$ CFU/g. duy soil, and the size is somewhat dependent on the moisture and oranic matter content of soils. A large number of bacteria were able to decompose macromolecules such as starch, elastin and gelatin. Bacterial species composition of each soil was comparatively simple. Pseudomonas, Agrobacterium, Flavobacterium and Xanthomonas which are Gram-negative short rods were widely distributed in the forest soils. The endospore forming Bacillus species were also the main constituents of the soil microflroa. Actinomycetes were widely distributed in the forest soils, but the distribution pattern varied in each site. Most of the actinomycetes were also able to decompose organic macromolecules. The rate of resistant actinomycete strains to antibiotics and heavy metals were lower than those from cultivated soils, but higher than those from well-preserved forest soils. Antibiosis pattern of the actinomycete isolates was similiar to the resistance pattern. This means the forest soils of Mt. nam was somewhat interferred by artificial behabiour.