• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2018

Recently, there has been rapid development in the field of flexible electronic devices, such as organic light emitting diodes (OLEDs), organic solar cells and flexible sensors. Encapsulation process is added to protect the flexible electronic devices from exposure to oxygen and moisture in the air. Using numerical simulation, we investigated the effects of the encapsulation layer on mechanical stability of the silicon chip, especially the fracture performance of center crack in multi-layer package for various loading condition. The multi-layer package is categorized in two type - a wide chip model in which the chip has a large width and encapsulation layer covers only the chip, and a narrow chip model in which the chip covers both the substrate and the chip with smaller width than the substrate. In the wide chip model where the external load acts directly on the chip, the encapsulation layer with high stiffness enhanced the crack resistance of the film chip as the thickness of the encapsulation layer increased regardless of loading conditions. In contrast, the encapsulation layer with high stiffness reduced the crack resistance of the film chip in the narrow chip model for the case of external tensile strain loading. This is because the external load is transferred to the chip through the encapsulation layer and the small load acts on the chip for the weak encapsulation layer in the narrow chip model. When the bending moment acts on the narrow model, thin encapsulation layer and thick encapsulation layer show the opposite results since the neutral axis is moving toward the chip with a crack and load acting on chip decreases consequently as the thickness of encapsulation layer increases. The present study is expected to provide practical design guidance to enhance the durability and fracture performance of the silicon chip in the multilayer package with encapsulation layer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.125-135
• /
• 1994

Field experiment was carried out in order to clarify effects of plastic film mulching on temperature and moisture of rhizosphere soil and their subsequent effects on seedling emergence, earlier growth, vegetative growth and grain yield of sesame. The textural class of the experimental field soil was the sandy loam(Bonyang series) and the variety of sesame planted was "Ansan-ggae". The experiment was conducted by combining four sowing dates of April 25, May 10, May 25, June 10 and two mulching treatments(mulching, non-mulching) over two year of 1991 and 1992. The results were summarized as follows : 1. The daily mean soil temperature of 5cm deep soil was increased by 1.4 to $2.8^{\circ}C$ by plastic film mulching. The average soil water content was increased by 0.5 to 3.0%(V/V) in the drier season, while decreased by 1.0 to 2.0%(V/V) in the rainy season by mulching. 2. The establishment rate of sesame seedling was very sensitive to soil temperature. For normal seedling emergence, from the seeding date to the 7th date after sowing, the daily mean soil temperature higher than $21.0^{\circ}C$ was required at the experimental field conditions. 3. The average soil water content in the range of 14.0 to 21.0%(V/V) at 5cm deep soil seemed not to be limiting for the germination and emergence of sesame. The effect of soil water content on seedling establishment was very small in this range, but the optimum level of soil water content ranged from 14.0 to 15.0%(V/V) in the experimented sandy loam. 4. The wetter the soil profile was, the larger the gap of soil temperature between the mulched and non-mulched condition was. The effect of mulching on the establishment rate of sesame seedlings was much greater in the lower air temperature conditions. However, when the sowing of sesame came earlier than at the date with the daily mean air temperature below $19.0^{\circ}C$, the effects of earlier sowing and mulching were offsetted by the retarded seedling growth due to the low air temperature, and thus earlier sowing with mulching did not enhance the grain yield of sesame.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.84-90
• /
• 2018

Cultivation of high-quality forage crop by using fallow field during winter is required for national high feed self-sufficiency and establishment of self-supply system of high-quality forage crop. Field experiments for cultivation of high-quality winter forage crop were conducted at the paddy and upland fields in Cheonan and Anseong city with treatments of single Italian ryegrass(IRG) and IRG mixed with forage barley at the paddy field and of single forage barley and forage barley mixed with IRG at the upland field in the Mid-west plain. Several cultivation conditions such as broadcasting IRG seed under standing rice, sowing time, tillage method, drainage condition, mixed sowing with forage barley were compared to know the change of growth, yield and quality of winter forage crop. In particular, over-wintering rate and dry matter yield were decreased significantly in late-sown IRG and moisture-stressed forage barley. Yield and quality of forage crops were increased by sowing after tillage, mixed sowing of IRG with barley at the paddy field with good drainage. High yield as much as dry matter $10MT\;ha^{-1}$ with high feed value could be obtained by early sowing of feed barley mixed with IRG at the upland field. Cultivation conditions such as early sowing, sowing after tillage, drainage management are required for higher dry matter yield, quality and stable cultivation of winter forage crops in the mid-west plain of Korea.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.191-199
• /
• 2000

This study was initiated to investigate the influence of biophysical condition on the composting characteristics, and conducted to develop technology for using recycled compost as a bulking agent cost to reduce operating cost. To methods of aeration, continuous aeration (CA: run No. I) and intermittent aeration (IA: run No. 2) were performed with three 12.3 liter laboratory scale vessels for ten days. Manure and rice hulls were mixed for thirst trial (I), rice hulls and recycled compost after first trial were mixed for second trial (II), dairy manure and only recycled compost after second trial were mixed for third trial (III). During the composting process, temperatures of the compost mass and ammonia emissions were measured. The quality and maturity of compost were ascertained by examining the characteristics and composition of the compost. Also, loss of mass was determined by measuring the mass of materials in the vessels before and after composting. The results in this study are as follows: 1. The periods of optimum temperature ($>55^{\circ}C$) to kill pathogens were maintained from 38 to 78 hours for CA and from 60 to 98 hours for IA. 2. The more recycled compost mixed, the more ammonia emitted. The maximum ammonia emissions were 287 ppm at CA and 420 ppm at IA. 3. Biofiltration system was required for the compo sting system using only recycled compost as an amendment, because the ammonia emissions was produced above 100 ppm at the end of composting process. 4. The quality and maturity of compost: - Fresh compost, were required drying, because moisture contents of the compost were approximately 70% in all tests. - The pH values were observed to rise smoothly, from 7.9 to 8.3 at CA and from 8.4 to 8.6 at IA. The CfN ratios of the fresh compost were ranged form 21.05 to 16.42 for CA and from 22.81 to 14.75 for IA. The final C/N ratios for test II and III were below 20.were below 20.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.188-194
• /
• 1987

Changes in some qualities of boiled-dried anchovy during storage at $-18^{\circ}C$, $-3^{\circ}C$, $5^{\circ}C$, $10^{\circ}C$ and room temperature for 12 months were studied. The monolayer moisture contents were 8.12% and 5.88% at $5^{\circ}C$ and $25^{\circ}C$, respectively. Volatile basic nitrogen (VBN) content was found to be higher at $5^{\circ}C$ and $-3^{\circ}C$ than those values at $10^{\circ}C$, $-18^{\circ}C$ and room temperature. Lipid oxidative browing and Hunter color values of L, a and b were remarkably developed with increase of storage temperature. Judging from organoleptic evaluation boiled-dried anchovy could be preserved in acceptable condition for $4{\sim}6\;months$ at room temperature, $5{\sim}8\;months$ at $10^{\circ}C$, $8{\sim}10\;months$ at $5^{\circ}C$ and 12 months at 7 below $-3^{\circ}C$. During storage at room temperature for 5 months after 7 months storage at $5^{\circ}C$ and $-18^{\circ}C$. VBN concept was increased by 1.03 and 1.38. browning rate by 1.03 and 2.15, and a and b values by $1.21{\sim}1.60 $and $1.02{\sim}2.80$ times in comparison with the basic room temperature, respectively.

• Korean Journal of Food Science and Technology
• /
• v.9 no.2
• /
• pp.123-130
• /
• 1977

A laboratory study was made to develop a simple and economic model method for the systematic determination of functional properties of 'Soy Protein Isolates (SPI)' prepared from defatted soybean meal. These are required to evaluate and to predict how SPI may behave in specific systems and such proteins can be used to simulate or replace conventional proteins. Data concerning the effects of pH, salt concentration, temperature, and protein concentration on the functional properties which include solubility, heat denaturation, gel forming capacity, emulsifying capacity, and foaming capacity are presented. The results are as follows: 1) The yield of SPI from defatted soybean meal increased to 83.9 % as the soybean meal was extracted with 0.02 N NaOH. 2) The suitable viscocity of a dope solution for spinning fiber was found to be 60 Poises by using syringe needle (0.3 mm) with 15 % SPI in 0.6 % NaOH. 3) Heat caused thickening and gelation in concentration of 8 % with a temperature threshold of $70^{\circ}C$. At $8{\sim}12\;%$ protein concentration, gel was formed within $10{\sim}30\;min$ at $70{\sim}100\;^{\circ}C$. It was, however, disrupted rapidly at $125\;^{\circ}C$ of overheat treatment. The gel was firm, resilient and self-supporting at protein concentration of 14 % and less susceptible to disruption of overheating. 4) The emulsifying capacity (EC) of SPI was correlated positively to the solubility of protein at ${\mu}=0$. At pH of the isoelectric point of SPI (pH 4.6), EC increased as concentration of sodium chloride increased. Using model system$(mixing\;speed:\;12,000\;r.p.m.,\;oil\;addition\;rate:\;0.9\;ml/sec,\;and\;temperature\;:\;20{\pm}1\;^{\circ}C)$, the maximum EC of SPI was found to be 47.2 ml of oil/100 mg protein, at the condition of pH 8.7 and ${\mu}=0.6$. The milk casein had greater EC than SPI at lower ionic strength while the EC of SPI was the same as milk casein at higher ionic strength. 5) The shaking test was used in determining the foam-ability of proteins. Progressively increasing SPI concentration up to 5 % indicated that the maximum protein concentration for foaming capacity was 2 %. Sucrose reduced foam expansion slightly but enhanced foam stability. The results of comparing milk casein and egg albumin were that foaming properties of SPI were the same as egg albumin, and better than milk casein, particularly in foam stability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.121-127
• /
• 1985

This study was designed to gain practical data on the use of soil conditioners for more efficient water managements and to establish the optimum levels of structural properties for soil conditioning. A sandy loam and a silt loam soil were each treated with two different soil conditioners, hydrophobic Bitumen or hydrophilic Uresol. The perspex tube 34 cm long were packed homogeneously with air dried soil up to 2 cm below the top, then covered over 2 cm of treated or untreated aggregates. The infiltration rate into the soil columns was measured under simulated rainfall condition. The evaporation study was carried out in the wind tunnel, and the changes of soil moisture distribution of the columns following and during the evaporation were determined by a gamma ray scanner. The infiltration rate of water into the soil column was increased to 18.7-50.8% by the Uresol treatment but it was decreased to less than 25% of control by the Bitumen treatment. Evaporation was decreased to 22.0-68.1% by the Bitumen treatment and to 38.7-68.4% by the Uresol treatment. The water use efficiency of Uresol treated column was increased to more than twice as much as that of untreated soil. Aggregate stability and wetting angle were related to water infiltration and evaporation. A positive and highly significant logarismic relationship was found between the infiltration rate and stability index-wetting angle, evaporation rate and instability index-wetting angle. It was considered that the structural stability is more important than wetting angle. This is true because the structural stability is always positively correlated to water saving, however wettability is positively correlated to the infiltration, and negatively correlated to water saving during the evaporation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1398-1406
• /
• 2004

To develop the new type of salt-fermented seafoods, the salt-fermented oysters in olive oil (product SO) were manufactured, and food components and quality characteristics of product SO were examined. The optimum processing condition for product SO is as follows. The raw oyster with no shell was washed off with 3% saline solution. Then dewatered, and dipped in the brine-salting solution made up with saturated saline solution and oyster sauce (2 : 1 v/v) mixture added 1% sodium erythorbic acid and 0.2% polyphosphate. After salt-fermentation it ripened by brine salting at 5$\pm$1$^{\circ}C$ for 15 days. Then dried at 15$^{\circ}C$ for 4 hours with cool-air, and packed in No. 3B hexahedron type can. Finally, poured with olive oil and seamed it by double-seamer. The moisture, crude protein, crude ash and volatile basic nitrogen contents of the product SO were 61.6%, 12.0%, 16.3% and 34.3 mg/100 g, respectively. In taste-active components of the product SO, total amount of free amino acids is 2,335.4 mg/100 g and it has increased by 50% overall during salt-fermentation 15 day. Taurine, glutamic acid, proline, glycine, alanine, $\beta$-alanine and lysine were detected as principal free amino acids. The contents of inorganic ions were rich in Na and K ion, while the amounts of nucleotide and its related compounds and other bases except betaine were small. From the results of this research, the product SO had a superior organoleptic qualities compared with conventional oyster product, and could be reserved in good conditions for storage 90 days at room temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.2
• /
• pp.149-157
• /
• 1988

This study was carried out to prepare the flavoring substance using sardine for instant soup, and to examine the taste compounds and storage stability of the product. In preparation of product, raw sardine are gutted, boiled for 10 minutes and smoked 3 times to $9{\sim}10%$ moisture content at $80^{\circ}C$ for 8 hours. The smoked-dried sardine meat were followed to be 50 mesh of particle size. The powdered-dried sardine were mixed 4.0% sugar, 20.0% table salt, 3.0% monosodium glutamate, 0.2% black pepper, 0.2% garlic powder and 0.2% onion powder, Finally the powdered instant soup product were vacuum packed in a laminated film(PET/A1 foil/CPP) bag, and then stored at room temperature for 120 days. The effect of smoking on enhancing flavor and on preventing lipid oxidation of product during storage were observed. From the chemical analysis and omission test, the principal taste compounds of product were IMP, 478.2mg/l00g; free amino acids such as glutamic acid, histidine, arginine, phenylalaine 3292.5mg/l00g; non-volatile organic acids such as lactic acid, ${\alpha}-ketoglutaric$ acid, 712.2mg/l00g; total creatinine 409.0mg/100g, and small amount of betaine, TMAO. Fatty acid composition of product were mainly consisted of polyenoic acids such as 20:5, 22:6, followed by saturated acids, monoenoic acid. The major fatty acid were 16:0, 16:1, 18:1, 20:5 and 22:6. From the results of sensory evaluation and chemical experiments during storage, the vacuum packed product were good condition for preserving the quality during storage for 120 days. We may conclude that the quality of present product was not inferior to that of seasoning powder of anchovy on the market, and it can be commercialized as a flavoring substance in preparing soup and broth.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.17-30
• /
• 2011

This study has analyzed the vegetation composition in the areas using different slope revetment techniques of riverbanks, in a way to improve the vegetation induction in the future considering the ecological aspects of the induction in Garaeyoul Village, Gangdong-gu, Seoul. The result of the vegetation distribution in each different slope revetment technique was analyzed, that the naturalized herb was dominant in the pole block accounting for 70.7%, while native herb was dominant in the lawn block occupying 48.5% and in the crib block occupying 55.7%. The vegetation coverage measured by different slope revetment techniques was highest in the crib block(average 97.5%), followed by the lawn block(average 95.3%) and pole block(average 27.9%). The vegetation base area was the most wide in the crib block and the most narrowest in the pole block. The result of community analysis in areas using different slope revetment techniques, dry herbs and vine herbs were dominated and the coverage was very poor in the pole block. In the lawn block, the barb was fragmented into narrow areas due to the blocks, which prevented the creation of large-scale plant communities. In the crib block, Miscanthus sacchariflorus, Fescue arundinacea and Aster pilosus, which also consisted of large-scale communities. Average dry weight was also measured by each slope revetment technique. The weight was heaviest in the crib block with $187.63g/m^2$, followed by the lawn block($137.65g/m^2$) and pole block($6.75g/m^2$). The soil moisture contents in the crib block and lawn block was 16.3% and 15.2%, respectively, while that of the pole block was 4.7%, which revealed the highly dry condition of the pole block soil. The analysis result of soil chemical property showed that there was little difference in soil texture, soile acidity(pH), and exchangeable ion content, however, the soil organic matter(OM) content and available $P_2O_5$ were highest in the pole block. In the future, in order to induce more vegetation into river banks and walls, a proper construction method should be applied so that the vegetation area can be expanded as much as possible, considering the safety of the banks.