• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.283-293
• /
• 2016

Owing to an increase in the air tightness of recent buildings, the natural ventilation rate was significantly lowered and the removal of accumulated moisture became difficult in these buildings. The hygrothermal performance of these buildings should be carefully considered to provide comfortable indoor environment by removing the moisture condensation risk and the mold growth potential. In this study, hygrothermal performance of two selected wall structures was investigated based on WUFI simulation program. The results displayed that the indoor temperature had impact on the moisture accumulation in the insulation layer for both modeled walls, showing that lower indoor temperature resulted in higher moisture accumulation, especially in the wood frame structure. Also, the yearly moisture accumulation profile exhibited a downward shift throughout the year by adding a vapour retarder with a lower sd-value. In addition, both of the two walls have condensation risk in winter, due to low temperature level. The wood frame structure has a bigger fluctuation and higher condensation risk than the concrete structure.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.56-65
• /
• 2010

The purpose of this study was finding out proper wall assembly to reduce moisture accumulation in light frame wall under outdoor air conditions. For the purpose, moisture transfer and accumulation in a wall were evaluated for five types of wall assembly; typical wall (T), addition of a vapor retarder (P1), addition of two vapor retarders (P2), addition of an open air gap for ventilation behind the siding (P3), and shift of vapor retarder with proposed wall 'P3' (P4). The moisture transfer and accumulation in the all walls were evaluated after applying the typical and proposed walls to the field test house. Performances of the typical and proposed walls were compared according to the season. Rank for effective wall on reducing moisture accumulation in wall was 1) shift of vapor ratarder and addition of open air gap (P4), 2) addition of vapor retarder (P1), 3) typical wall (T), 4) addition of open air gap (P3), and 5) the other (P2).

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.320-329
• /
• 2009

The purpose of this study was reducing the moisture accumulation in a wall, which can threaten the structural safety of light-frame wall and make residential environment poor. For the purpose, the laboratory test was carried out with different wall assemblies. Vapor retarder and air gap for ventilation were added to the typical wall. The improved performance of the proposed walls was examined through the test with distinct difference of temperature and relative humidity between outdoor and indoor air conditions. Increased dampproofing performance of additional vapor retarder was effective on reduction of moisture transmission from inside the house into the wall. However, unexpected high relative humidity was shown in the wall with two additional vapor retarder because of excessive dampproofing performance or inadequate location of vapor retarder. And, the open air gap induced the moisture transfer from inside the wall into outdoor air by ventilation. If the alternative to the induction of moisture transmission from inside the house into the wall with open air gap can be found, moisture reduction effect of that will be increased obviously.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.61-70
• /
• 2001

As important factors determining human sensorial comfort, liquid moisture management and surface properties of heat resistant workwear materials were examined. To figure out liquid moisture management properties of the test materials, absorption capacity, rate of absorption, and evaporation properties were assessed. A modified GATS(Gravimetric Absorbency Testing System) was used to measure the liquid moisture accumulation associated with the wicking of liquid moisture from sweating skin. The GATS procedure measures demand wettability of materials to take up liquid in a direction perpendicular to the fabric surface and it was modified to incorporate a special test cell and cover to assess absorption behavior in the presence of evaporation. Fabric stiffness, smoothness, number and the length of surface fibers, and an estimate of the contact area between the skin and fabric surface were measured to characterize the mechanical and surface properties of the test materials. Also an estimate of the force with which a fabric clings to moist skin was made using as wet-cling index.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.152-161
• /
• 1985

To examine the effects of different levels of soil moisture on dry matter production and chemical compositions of sorghum cv. Pioneer 931, sorghum-sudangrass hybrid cv. Pioneer 988, sudangrass cv. Piper, and corn cv. Suweon 19. Soil moisture contents were maintained with approximately 100, 80 and 40% of field moisture capacity. The results are summarized as follows; 1. The highest dry matter yields per plant were found at 60% soil moisture level with 176.2g, 180.8g and 164.0g for pioneer 931, Pioneer 988 and corn, respectively. 2. Dry matter accumulation in accordance with soil moisture levels and growth stages of all crops except sudangrass were in the order of 60>40>80>100% soil moisture level. 3. The highest absolute growth rate (AGR) of sorghum, sorghum-sudangrass hybrid and corn was shown at 60% soil moisture level, that of sudangrass was shown at 80% soil moisture level. The relative growth rate (RGR) of all crops was high in the early growing stage and was low at maturity. The highest net assimilation rate (NAR) of all crops was found at 60% soil moisture level with $72-467g/m^2/day$ from June 29 to July 5. 4. The higher crude fiber content in leaf of Pioneer 931 was shown at 100% and 80% soil moisture levels with 28.6-28.8%, that of corn had no significant difference among soil moisture levels. The crude protein content in leaf of all crops was 14.2-21.6% at 60% soil moisture level, 13.8-16.0% at 40% soil moisture level, and 7.3-13.9% at above 80% soil moisture levels, respectively. 5. The crude fiber content in stern of all crops and all soil moisture levels was 24.6-36.7%, and the crude protein content in stem was 2.5-5.3% in dry matter basis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.346-350
• /
• 2001

The present study was designed to evaluate the usefulness of Sauropus. androgynus leaf (SAL) meal on reducing fat accumulation in broiler chickens. Eighty unsexed broiler chickens were allocated to four treatment groups with five replicates of four chickens each. SAL meal supplementation had no effect on body, leg, back, breast, wing, liver and heart weights, carcass protein, moisture and ash contents (p>0.05). Broilers fed diets supplemented with 30 g of SAL meal had lower feed intake with better feed conversion ratio (p<0.05) than did the control chickens. SAL supplementation at all levels significantly reduced fat accumulation in abdomen region, and liver (p<0.01), and in carcass (p<0.05). Higher SAL supplementation resulted in lower fat accumulation in the carcass ($r^{2}=0.94$; p<0.01), abdomen ($r^{2}=0.99$; p<0.01) and liver ($r^{2}=0.98$; p<0.01). The current study showed that a 30 g supplementation of SAL meal to the broiler diet was effective to improve feed conversion ratio without reducing body weight. SAL meal supplementation to the diet reduce fat accumulation in broiler chickens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.439-448
• /
• 2011

Oxalic acid is synthesized by a wide range of plants. A few of them are forage plants that can cause oxalate poisoning in ruminants under certain conditions. In this paper, the role of some agronomic, climatic and genetic factors in minimizing oxalate accumulation in forage plants has been discussed. Research indicates that the content of oxalate in forage can be controlled by fertilizer application. For example, nitrate application resulted in higher contents of soluble and insoluble oxalates than ammonium application. With an increased rate of potassium application, soluble oxalate content showed an increasing trend and insoluble oxalate content showed a decreasing trend. With an increased rate of calcium application, soluble oxalate content showed a decreasing trend and insoluble oxalate content showed a reverse trend. Other agronomic factors such as growing season, harvesting practices, plant maturity, plant species, plant variety and plant parts can also have a large effect on oxalate accumulation. However, the potential benefits of the above approaches for improving forage quality have not been fully exploited. In addition, there is still insufficient information to fully utilize means (e.g. plant nutrients, season and soil moisture) to minimize oxalate accumulation in forage plants. Therefore, more research is required for a better understanding of the interactions between oxalate and the above-mentioned factors in forage plants.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.143-151
• /
• 1985

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.5
• /
• pp.39-47
• /
• 2000

This study is to investigate the conditions closely related to the establishment of vegetation in the riparian zone: the soil condition, an important factor along with climate and light. Especially, the soil structure of the microtopographical formations in the specific area known as the riparian microtopographical zone investigated. In addition, the effect of the riparian microtopographical features on the ground water level, soil moisture content, and vegetation was studied. The results of this study are as follows; 1) At all sample sites, below the sand layer, a gravel layer is always present. This is the result of past floods. 2) Although Salix koreensis experiences frequent disturbances such as increase in river level and floods, this vegetation establishes itself in the most secure are in the microtopographical zone. 3) The growth of Phragmites japonica is closely related to the underground water level. 4) It is clear that Miscanthus sacchariflorus grows concentrated in dry areas. 5) The soil accumulation conditions differ according to the soil moisture content of each microtopgraphical feature. Accordingly, the moisture content of the soil is clearly different within the microtopographical zone. The continuous and long-term investigation and research on the relation of riparian reproduction and the relevance with location surrounding factors are necessary in the future.