• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.656-661
• /
• 2013

In this study, the moisture content, charge discharge current, electrostatic capacity and dielectric loss tangent are measured for the specimen of bisphenol type epoxy resin which is mixed with squared amorphous silica filler and dipped in hot water of $50^{\circ}C$ for 169 days. The results of this study are listed below. The longer of deposition day, the charge and discharge current was increased. It is considered that the reason is because there was water attack through the squared silica surface. The longer of deposition day, the absorption rate of all specimens was increased. It found that the absorption rate reached saturated state after 100 days. The higher frequency and the longer of deposition day, the $tan{\delta}$ was decreased. Also, It found that the $tan{\delta}$ and electrostatic capacity of the specimen which is mixed with squared filler are greater.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.61-70
• /
• 2001

As important factors determining human sensorial comfort, liquid moisture management and surface properties of heat resistant workwear materials were examined. To figure out liquid moisture management properties of the test materials, absorption capacity, rate of absorption, and evaporation properties were assessed. A modified GATS(Gravimetric Absorbency Testing System) was used to measure the liquid moisture accumulation associated with the wicking of liquid moisture from sweating skin. The GATS procedure measures demand wettability of materials to take up liquid in a direction perpendicular to the fabric surface and it was modified to incorporate a special test cell and cover to assess absorption behavior in the presence of evaporation. Fabric stiffness, smoothness, number and the length of surface fibers, and an estimate of the contact area between the skin and fabric surface were measured to characterize the mechanical and surface properties of the test materials. Also an estimate of the force with which a fabric clings to moist skin was made using as wet-cling index.

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.424-429
• /
• 2016

본 연구에서는 중밀도섬유판, 파티클보드, 배향성스트랜드보드, 합판을 이용하여 탄화보드를 제조하고 각각의 흡방습 특성을 살펴보았다. 탄화보드는 $600^{\circ}C$에서 2시간 동안 열분해하는 조건으로 제조되었다. 그 결과, 탄화합판, 탄화OSB, 탄화MDF, 탄화파티클보드 순으로 높은 흡방습 성능을 나타내었다. 흡습률 및 방습률은 탄화파티클보드를 제외한 나머지 탄화보드들 간에 큰 차이는 발견하지 못했다. 이것은 목질재료가 탄화됨으로서 탄소로 변환되어 수분을 흡착하는데 높은 능력을 가졌지만 수분이 내부구조로까지의 이동에 있어서는 목재 본래의 구조에 영향을 받는다는 것을 의미한다. 따라서 목재의 구조의 특성을 살려 탄소화 했을 때 높은 흡방습 특성을 가진 탄화보드를 제조할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.480-489
• /
• 2010

국내 시판용 전통 목탄의 과학적인 성질 규명과 주요 기능성 분석과 이용 방안에 대한 분석을 실시하였다. 국내에서 구입 가능한 시판용 목탄의 범위 내에서 해부학적 특성, 원소 조성, 무기성분 조성, 발열량, 음이온 및 원적외선 방사량, 조습성 등의 분석을 통하여 기능성 재료로 이용 가능성에 대하여 판단하고자 하였다. 원소조성, 무기물 조성, 음이온 및 원적외선 방사량은 목탄 제조 방법과 제조회사에 따라서 큰 변이를 보였다. 특히 조습성은 흑탄의 경우 백탄이나 기계숯 보다 열등한 성능을 나타내었다. 전통숯을 기능성 재료로 사용하기 위해서는 해부학적 특성, 원소 조성, 무기물 조성, 발열량, 음이온 및 원적외선 방사량, 조습성을 분석하여 선택적 이용이 필요 할 것으로 생각한다. 또한 차후 원하는 기능에 맞는 목탄 제조 방법 기술의 개발이 필요할 것으로 생각한다.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.836-843
• /
• 2021

Recently, with an increase of interest in hygiene of textile products, research related to finishing technology to impart various functionalities, such as antibacterial and deodorizing properties, has also required. Therefore, in this study, the improvement of comfort was examined by analyzing the change of moisture characteristics and antibacterial and deodorizing properties of underwear fabric by chitosan microcapsule(CH-M) finishing. The results revealed that moisture absorption time of the fabric shortened, diffusion rate increased, while absorption rate slightly increased because of microcapsule finishing. In addition, the one-way transfer capacity of the microcapsule finished fabric was 17.69, which improved moisture transfer to one side, while OMMC showed the values of 0.32 and 0.37 for untreated and finished fabrics, respectively, which slightly increased after finishing. In the case of untreated fabric, antibacterial activity was 89.0% against Staphylococcus aureus and 70.3% against Klebsiella pneumoniae; however, both strains showed 99.9% antibacterial activity by CH-M finishing. An excellent bacterial reduction rate was also observed. In the case of the CH-M finished fabric, there was a deodorization effect exceeding 99% up to 120 minutes, and it showed an excellent deodorization effect of more than 99% even after 10 repeated washings.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.679-685
• /
• 2008

This paper describes the degraded properties of between the charge and discharge current for ${\gamma}$-ray irradiated in electric power cable rubbers using in nuclear power generating station. The charge and discharge current of degradation in EPR(Ethylene Propylene Rubber), which were irradiated with the radiant capacity of 0.033 Mrad/h, have been measured in order to investigate the influence of the atmosphere(in amount of reinforcing agent, moisture absorption and heat treatment) on electrical properties. When ${\gamma}$-ray were irradiated on the EPR with more reinforcing agent from 4 to 40 Phr, charge and discharge currents was increase due to the amount of reinforcing agent. It was verified that the discharging and charging currents irradiated by ${\gamma}$-ray were higher than those that was not irradiated. The amount of the degraded current was more after moisture absorption than before moisture absorption. The charge and discharge current after heat treatment was similar to that of before heat treatment and it was decreased with the time elapsed. As these properties related with ${\gamma}$-ray irradiation dose, it is suggested that these properties can be utilized as a index of irradiation degradation.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.787-798
• /
• 2017

본 연구는 시중에 판매되고 있는 시트 타입 마스크 팩의 재질에 따른 특성에 관한 연구이다. 정제수와 1.3-propanediol, 1.3-butylene glycol, Glycerine, Hyaruronic acid와 같은 수용성 성분과 Cyclomethicone, Dimethicone, Phytosqualane, Caprylic Capryl Triglyceride, Grape seed oil, Macadamia Nut oil 오일을 비롯한 다양한 오일의 흡유력을 살펴 본 결과 정제수를 제외한 모든 수용성 성분들은 점도가 커질수록 흡습능력이 커졌고 오일의 경우엔 모든 오일의 점도에 비례하여 흡유 능력이 커짐을 확인할 수 있었다. 이때 마스크 시트의 종류는 초산 발효 바이오셀룰로오스가 수용성 습윤제나 모든 오일에 있어서 500~1,000 배 이상의 함습, 함유 능력을 보여주었는데 이는 표면 구조에서 살펴본 바와 같이 5,000배 이상 확대한 사진에서 보이는 미세한 망상 구조를 이루고 있기 때문이다. 망상 구조는 단면에서도 잘 확인할 수 있었고 이러한 구조적 특징이 함습, 함유 능력을 우수하게 하며 다량 함유된 수용성 성분과 오일은 시간 경과에 따라 배출 또한 용이하게 하는 것으로 사료되는 바이다. 또한 각 마스크 시트는 소재에 따라 그 특성을 보여주고 있기에 피부에 좋은 역할을 할 수 있는 마스크 팩의 제조에 기초 연구로 삼고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.118-133
• /
• 2024

The sapwood portion of fast-growing teak is mostly ignored due to its inferior quality. One of the possibilities for utilizing sapwood waste is to convert it into activated carbon that has good adsorption capabilities. The raw materials used in this research were sapwood of 14-year-old fast-growing teak sapwood (FTS) waste, which was taken from three trees from community forests in Wonosari, Gunungkidul, Yogyakarta Special Region. FTS waste was taken from the bottom of the tree up to a height of 1.3 m. The activation process is conducted with an activation temperature of 750℃, 850℃, and 950℃. The heating duration consists of three variations: 30 min, 60 min, and 90 min. The quality evaluation parameters of activated carbon include yield, moisture content, volatile matter content, ash content, fixed carbon content, adsorption capacity of benzene, adsorption capacity of methylene blue, and adsorption capacity of iodine. The results showed that the activated carbon produced had the following quality parameters: yield of 75.61%; moisture content of 1.27%; volatile matter content of 9.98%; ash content of 5.43%; fixed carbon content of 84.58%; benzene absorption capacity of 8.58%; methylene blue absorption capacity of 87.73 mg/g; and iodine adsorption capacity of 948.19 mg/g. It can be concluded that activated carbon from FTS waste has good iodine adsorption, which fulfilled the SNI 06-3730-1995 quality standard. Due to the iodine adsorption ability of FTS waste activated carbon, the conversion of FTS waste to activated carbon is categorized as a potential method to increase the value of this material.

• 대한가정학회지
• /
• 제30권3호
• /
• pp.101-117
• /
• 1992

Effects of gamma irradiation(2.5∼20kGy) on water absorption property was studied for a local variety of black soybeans. In water absorption patterns of black soybeans, the time to reach a fixed moisture content was reduced depending on the increment of water soaking temperature and irradiation dose. Irradiation at 2.5∼10kGy resulted in the reduction of soaking time of black soybeans by about 1∼3 hours and the increase of hydration capacity by 10∼20%, respectively, compared to the nonirradiated control black soybean. The water uptake rate constant of the irradiated black soybean difinitely increased with the increase of dose levels and water soaking temperature. The activation energy for water absorption and z-value were lower in the irradiated black soybeans than in the nonirradiated control black soybean. The efficacy of water absorption property in the irradiated black soybeans was also recognized after one year of storage at room temperature.

• 한국조리학회지
• /
• 제23권4호
• /
• pp.116-124
• /
• 2017

This study was investigated quality characteristics of gluten-free noodles added guar gum and basil seed gum (BSG). Gluten-free noodles were prepared using corn flour and corn starch and added 1% and 2% of guar gum and basil seed gum. Water binding capacity was measured by centrifuge, and moisture content was obtained by moisture analyzer. Color of noodles was measured from the midsection of noodles. Water absorption of noodles was calculated by weight of uncooked and cooked noodles. pH of noodles was measured by pH meter. Texture and tensile strength were obtained by rheometer. SPSS 12.0 program was used for significant differences by Duncan's multiple range test. Water binding capacity of noodles was the highest in 2% basil seed gum but 1% guar gum was the lowest. Moisture content was not different in uncooked noodles, but 1% guar had the highest moisture content in cooked noodles. Water absorption of noodles was high in basil seed gum group. pH of noodles was more increased in guar gum additions than basil seed gum additions. For hardness, control had the lowest as 16.09 N, but 2% guar gum showed the highest as 28.40 N. Tensile strength of noodles was increased by adding gums. These results suggested that 1% basil seed gum could be good materials for manufacturing gluten-free noodles in order to improve quality characteristics.