• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.108-113
• /
• 2004

Marinas are often located in prime port side locations. hi Korea these locations are already developed and reclamation of the existing properties poses many difficulties and financial overhead. Also, to develop a standard marina in Korea with tide ranges up to 6 meters would require considerable dredging and reclamation works needing long lead times and large SOC costs. The Ocean Space's floating marina system is an independent offshore floating static level system that does not require fixed location breakwaters. The entire marina floats with the tide giving a calm consistent berthing condition for vessels irrespective of the surrounding tide and weather conditions. The floating marina system provides also for all of functions needed to marina comprising a breakwater to protect the vessels, the pontoon system to house the vessels, a dub house and retail tourism precinct, fuel reservoir and associated support facilities in a turn key self contained unit. The modular nature of the system will mean that initial demand can be met with simple units and then further modules can be added quite easily without the related expansion difficulties or infrastructure. This paper contains the main characteristics of the floating marina system and tire design process of the structure. The mooring, motion & stability analysis, the overall & local structural design and the mooring & anchor system design are introduced in this paper.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(B)
• /
• pp.313-316
• /
• 2011

SRAM-based FPGAs are very sensitive to single event upset(SEU) induced by space irradiation. To mitigate SEU effects, space applications employ some mitigation schemes. The triple modular redundancy(TMR) is a well-known mitigation scheme. It uses one or three voters as well as three identical blocks performing the same work. The voters can mask out one error in the outputs from the three replicated blocks. One SEU error in TMRed circuits can be masked but it needs to be detected for some reasons such as to analyze the SEU effects in the satellite or to recover the circuits from the error before additional error occur. In this paper, we developed a fault detection circuit and reporting system to detect a fault on the TMRed circuits. To verify our error detection circuit and reporting circuit, we performed an irradiation test at MC-50 Cyclotron. Experimental results showed that error detection circuit can detect a fault on the TMRed test circuit in radiation environment.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.805-815
• /
• 2007

단일추력의 정상 작동 상태의 액체 로켓 엔진 시스템 모듈화 프로그램을 작성하기 위한 선행 연구로 엔진 주요 구성품들에 대한 성능설계 프로그램을 작성하였다. 주요 구성품으로는 추력실, 원심형 펌프, 충동형 터빈, 재생 냉각 채널 등이 고려되었다. 복잡성을 피하기 위하여 열역학적 관계식 및 비점성 이론을 바탕으로 한 여러가지 관계식들과 간략한 수학적 모델을 사용하였다. 본 논문에서는 도출된 결과를 정성적으로 살펴보고, 주요 설계 파라미터를 바꿔가면서 구성품의 작동특성 변화에 대한 경향성을 검토함으로써 일반적인 구성품 설계 이론에 부합하는가를 확인하였다.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.9-15
• /
• 2005

국방과학연구소 풍동실험실에서는 회전익 항공기 개발에 소요되는 관련 풍동시험 기법의 확립과 형상연구 관련 시험자료의 확보를 위한 실험적 연구를 수행하였다. 본 연구는 회전익 항공기 동체구성품의 형상조합에 따른 항력증분과 안정성 평가를 위한 공기역학적 특성의 추출을 목적으로 하였으며, 풍동시험에는 모듈화된 1:8 축척의 회전익 항공기 동체형상과 500 rpm으로 회전하는 로터허브의 부분모형이 사용되었다. 시험결과들을 기존의 유사 항공기 시험결과들과 비교하였으며, 기존 연구결과들과 잘 부합됨을 확인하였다.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.48-55
• /
• 1997

Advances in VLSI technology have brought us completely new design principles for the high-performance switching fabrics including ATM switches. From a practical point of view, port scalability of ATM switches emerges as an important issue while complexity and performance of the switches have been major issues in the switch design. In this paper, we propose a cost-effective approach to modular ATM switch design which provides the good scalability. Taking advantages of both time-division and space-division switch architectures, we propose a practically implementable large scale ATM switch architecture. We present a scalable shared buffer type switch for a building block and its expansion method. In our design, a large scale ATM switch is realized by interconnecting the proposed shared buffer switches in three stages. We also present an efficient control mechanism of the shared buffers, synchronization method for the switches in each stage, and a flow control between stages. It is believed that the proposed approach will have a significant impact on both improving the ATM switch performance and enhancing the scalability of the switch with a new cost-effective scheme for handling the traffic congestion. We show that the proposed ATM switch provides an excellent performance and that its cell delay characteristic is comparable to output queueing which provides the best performance in cell delay among known approaches.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1890-1901
• /
• 2022

We have assessed the applicability of the thermal-hydraulic system analysis code, SPACE, to a small modular reactor called SMART. For the assessment, the experimental data from a scale-down integral-test facility, SMART-ITL, were used. It was conformed that the SPACE code unrealistically calculates the safety injection flow rate through the CMT and SIT during a small-break loss-of-coolant experiment. This unrealistic behavior was due to the overprediction of interfacial heat transfer at the steam-water interface in a vertically stratified flow in the tanks. In this study, a special thermal-hydraulic component model has been developed to realistically calculate the interfacial heat transfer when a strong non-equilibrium two-phase flow is formed in the CMT or SIT. Additionally, we developed a special heat structure model, which analytically calculates the heat transfer from the hot steam to the cold tank wall. The combination of two models for the tank are called the special component model. We assessed it using the SMART-ITL passive safety injection system (PSIS) test data. The results showed that the special component model well predicts the transient behaviors of the CMT and SIT.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권9호
• /
• pp.519-524
• /
• 2014

독립적인 전자 장비들을 모듈화하여 하나로 통합한 시스템에 탑재되는 운영체제는 안정성 보장을 위해 파티셔닝 기술을 갖추어야 한다. 기존 운영체제에 파티셔닝 기술을 접목하기 위해서는 기존 스케줄러를 파티션 스케줄러로 확장해야한다. 특히 낮은 성능과 적은 메모리를 사용하는 우주용 시스템과 같은 임베디드 시스템에 적용하기 위해서는 스케줄러 확장시 성능적인 측면뿐만 아니라 메모리적인 측면도 고려해야한다. 본 논문에서는 파티션 비트맵을 이용한 메모리 효율적인 리눅스 파티션 스케줄러를 제안한다. 제안한 파티션 스케줄러는 구현시 적은 양의 메모리 공간을 요구하며 적은 파티션 전환 오버헤드가 발생한다. 또한 프로토타입을 LEON 4 프로세서 보드에 구현하였다. 성능평가를 통해 결과 정확성과 파티션 전환 오버헤드, 그리고 구현시 요구되는 메모리 공간 및 추가되는 소스코드의 양을 확인하였다.

• 한국경제지리학회지
• /
• 제9권2호
• /
• pp.243-260
• /
• 2006

유럽연합의 자동차산업은 생산공간의 확대와 경제통합의 심화 그리고 미국과 일본 등 역외 완성차업체의 시장진출로 생산방식 및 생산체계의 지리적 재구조화가 형성되고 있다. 생산활동의 글로벌화와 지역화로 완성차업체간 경쟁이 심화되면서 비용절감과 다양한 제품개발, 신속한 제품혁신 위해 생산방식이 플랫폼의 공용화와 모듈화된 부품조달체계로 변화되고 있다. 모듈화된 부품조달방식의 채택으로 완성차업체와 부품공급업체간의 역할이 재조정되고 생산활동과 관련된 다양한 생산기능들의 지리적 재구조화가 활발히 진행되고 있다. 새로운 생산방식과 생산공간 확대, 그리고 경제통합의 심화에 의해 제공된 기회를 이용하기 위해 제품의 특성과 생산활동의 기능별 특성에 따라 공간적으로 전문화되고 집적화되는 경향을 보이고 있다. 고가모델의 생산과 연구 개발 및 전문서비스 기능은 중심부에서 강화되고 저가모델의 생산과 일반화된 장비 및 부품생산 기능은 주변부에 분산 입지하는 계층적 구조가 심화되고 있다.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.31-38
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC(Modular Coordination) design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• KIEE International Transactions on Power Engineering
• /
• 제3A권3호
• /
• pp.139-147
• /
• 2003

The paper presents a novel approach of constructing the state matrix of the multi-machine power system for SSR (subsynchronous resonance) analysis using the linearized equations of individual devices including electrical transmission network dynamics. The machine models in the local d-q reference frame are integrated with the network models in the common R-I reference frame by simply transforming their output equations into the R-I frame where the transformed output is used as the input to the network dynamics or vice versa. The salient feature of the formulation is that it allows for modular construction of various component models without rearranging the overall state space formulation. This universal SSR small signal stability program provides a flexible tool for systematic analyses of SSR small-signal stability impacts of both conventional devices such as generation systems and novel devices such as power electronic apparatus and their controllers. The paper also presents its application results to IEEE benchmark models.