• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.47-50
• /
• 2004

In this paper, we implement an Elliptic Curve Cryptosystem(ECC) processor for DTCP. Because DTCP(Digital Transmission Content Protection) uses GF(p), where p is a 160-bit prime integer, we design a scalar multiplier based on GF(p). The scalar multiplier consists of a modular multiplier and an adder. The multiplier uses montgomery algorithm which is implemented with CSA(Carry-save Adder) and CLA(Carry-lookahead Adder). Our new scalar multiplier has been synthesized using Samsung 0.18 um CMOS technology and the maximum operation frequency is estimated 98 MHz, with the size about 65,000 gates. The resulting performance is 29.6 kbps, that is, it takes 5.4 msec to process a 160-bit data frame. We assure that this performance is enough to be used for digital signature, encryption/decryption, and key exchanges in real time environments.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1499-1507
• /
• 2015

High voltage direct current transmission based on modular multilevel converter (MMC-HVDC) is one of the most promising power transmission technologies. In this study, the mathematical characteristics of MMC-HVDC are analyzed in a synchronous rotational reference frame. A hybrid current vector controller based on proportional integer plus resonant is used to uniformly control the DC and double-base frequency AC currents under unbalanced grid voltage conditions. A corresponding voltage dependent current order limiter is then designed to solve the overcurrent problems that may occur. Moreover, the circulating current sequence components are thoroughly examined and controlled using a developed circulating current suppressor. Simulation results verify the correctness and effectiveness of the proposed control schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.430-435
• /
• 1992

Hazard identification is one of the most important task in process design and operation. This work has focused on the development of a knowledge-based expert system for HAZOP (Hazard and Operability) studies which are regarded as one of the most systematic and logical qualitative hazard identification methodologies but which require a multidisciplinary team and demand much time-consuming, repetitious work. The developed system enables design engineers to implement existing checklists and past experiences for safe design. It will increase efficiency of hazard identification and be suitable for educational purposes. This system has a frame-based knowledge structure for equipment failures/process material properties and rule networks for consequence reasoning which uses both forward and backward chaining. To include wide process knowledge, it is open-ended and modular for future expansion. An application to LPG storage and fractionation system shows the efficiency and reliability of the developed system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.607-608
• /
• 2006

This article deals the development of Agile and Intelligent Manufacturing System(AIM) for the assembly automation of a tiny ultrasonic actuator used in camera phones and PDAs. The system consists of multi-vision modules, end-effectors, a standard base frame, dispensers, jigs and modular manipulators. Subsystems are a vision system, a force control system and a virtual reality system. Experimental results show that the assembly process for the small components in the various IT applications can be realized by the AIM system.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.354-359
• /
• 2012

A transformerless converter suitable for multiphase drive application is presented in this paper. The topology employs a cascaded H-bridge rectifier as the interface between the grid and multi inverters which drive the multiphase motor. Compared with the conventional structure, the new topology eliminates the input transformer and also has the advantages such as four quadrant operation, simple configuration, low cost, high efficiency, and so on. The control strategies for the grid-side cascade H-bridge rectifier and the motor-side inverter are studied accordingly. Based on the multi-rotational reference frame, modular control scheme is developed to regulate the multiphase drive system. Simulation results show the proper operation of the proposed topology and the corresponding control strategy.

• Journal of Information Processing Systems
• /
• v.19 no.4
• /
• pp.439-449
• /
• 2023

This paper deals with a resource efficient artificial intelligence (AI) service architecture for multi-channel video streams. As an AI service, we consider the object detection model, which is the most representative for video applications. Since most object detection models are basically designed for a single channel video stream, the utilization of the additional resource for multi-channel video stream processing is inevitable. Therefore, we propose a resource efficient AI service framework, which can be associated with various AI service models. Our framework is designed based on the modular architecture, which consists of adaptive frame control (AFC) Manager, multiplexer (MUX), adaptive channel selector (ACS), and YOLO interface units. In order to run only a single YOLO process without regard to the number of channels, we propose a novel approach efficiently dealing with multi-channel input streams. Through the experiment, it is shown that the framework is capable of performing object detection service with minimum resource utilization even in the circumstance of multi-channel streams. In addition, each service can be guaranteed within a deadline.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2891-2898
• /
• 2014

It is feasible to develop a fault tolerant system through module level redundancy on the Integrated Modular Avionics (IMA). However, its great implementation complexity is one of important challenges when asynchronous hardware environment is naturally assumed. To solve this problem, Physically Asynchronous Logically Synchronous (PALS) on IMA has been proposed. But, it has adaptation problem by not addressing specific architecture for IMA system. In the paper, we propose how to synchronize the input data on the IMA system under primary/secondary redundancy architecture by referring to existing PALS. In the proposed scheme, we introduce window frame by considering rate monotonic scheduling and analyze the adequate the synchronization time. Finally, we verify the feasibility of the proposed design pattern through the systematic experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.771-779
• /
• 2009

Digital topographical maps used for GIS DB are mainly produced by the traditional way of analogue aerial photogrammetry. Therefore, analogue photos are only available for digital mapping after preprocessing such as film developing, printing and scanning. However, digital aerial camera is able to get digital image directly without preprocessing and thus the performance and efficiency of photogrammetry are extremely increased. This study aims to investigate geometric stability of digital aerial frame camera DMC (Digital Modular Camera). In order to verify the geometric stability of digital aerial camera DMC, some different block conditions with and without cross strips, GPS/INS data and variation of GCPs are introduced in the block adjustment. The accuracy results of every block condition were compared each other by computation of residuals of exterior orientation (EO) parameters. Results of study shows that the geometric stability of the block adjustment with cross strips is increased about 30% against without cross strips. The accuracy of EO parameters of block adjustment with cross strips is also increased about 2cm for X-coordinate, 3cm for Y-coordinate, 3cm for Z-coordinate, and 6" for omega, 4" for phi and 3" for kappa.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.124-130
• /
• 1998

High-speed 3D vision systems are essential for autonomous robot or vehicle control applications. In our study, a stereo vision process has been developed. It consists of three steps : extraction of edges in right and left images, matching corresponding edges and calculation of the 3D map. This process is implemented in a VME 150/40 Imaging Technology vision system. It is a modular system composed by a display, an acquisition, a four Mbytes image frame memory, and three computational cards. Programmable accelerator computational modules are running at 40 MHz and are based on TMS320C31 DSP with a $64{\times}32$ bit instruction cache and two $1024{\times}32$ bit internal RAMs. Each is equipped with 512 Kbytes static RAM, 4 Mbytes image memory, 1 Mbytes flash EEPROM and a serial port. Data transfers and communications between modules are provided by three 8 bit global video bus, and three local configurable pipeline 8 bit video bus. The VME bus is dedicated to system management. Tasks between DSPs are distributed as follows: two DSPs are used to edges detection, one for the right image and the other for the left one. The last processor computes the matching process and the 3D calculation. With $512{\times}512$ pixels images, this sensor generates dense 3D maps at a rate of about 1 Hz depending of the scene complexity. Results can surely be improved by using a special suited multiprocessors cards.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2002.10a
• /
• pp.18-25
• /
• 2002

The pikromycin biosynthetic system in Streptomyces venezuleae is unique for its ability to produce two groups of antibiotics that include the 12-membered ring macrolides methymycin and neomethymycin, and the 14-membered ring macrolides narbomycin and pikromycin. The metabolic pathway also contains two post polyketide-modification enzymes, a glycosyltransferase and P450 hydroxylase that have unusually broad substrate specificities. In order to explore further the substrate flexibility of these enzymes a series of hybrid polyketide synthases were constructed and their metabolic products characterized. The plasmid-based replacement of the multifunctional protein subunits of the pikromycin PKS in S. venezuelae by the corresponding subunits from heterologous modular PKSs resulted in recombinant strains that produce both 12- and 14-membered ring macrolactones with predicted structural alterations. In all cases, novel macrolactones were produced and further modified by the DesVII glycosyltransferase and PikC hydroxylase leading to biologically active macrolide structures. These results demonstrate that hybrid PKSs in S. venezuelae can produce a multiplicity of new macrolactones that are modified further by the highly flexible DesVII glycosyltransferase and PikC hydroxylase tailoring enzymes. This work demonstrates the unique capacity of the S. venezuelae pikromycin pathway to expand the toolbox of combinatorial biosynthesis and to accelerate the creation of novel biologically active natural products. The polyketide backbone of rifamycin B is assembled through successive condensation and ${\beta}$-carbonyl processing of the extender units by the modular rifamycin PKS. The eighth module, in the RifD protein, contains nonfunctional DH domain and functional KR domain, which specify the reduction of the ${\beta}$-carbonyl group resulting in the C-21 bydroxyl of rifamycin B. A four amino acid substitution and one amino acid deletion were introduced in the putative NADPH binding motif in the proposed KR domain encoded by rifD. This strategy of mutation was based on the amino acid sequences of the corresponding motif of the KR domain of module 3 in the RifA protein, which is believed dysfunctional, so as to introduce a minimum alteration and retain the reading frame intact, yet ensure loss of function. The resulting strain produces linear polyketides, from tetraketide to octaketide, which are also produced by a rifD disrupted mutant as a consequence of premature termination of polyketide assembly. Much of the structural diversity within the polyketide superfamily of natural products is due to the ability of PKSs to vary the reduction level of every other alternate carbon atom in the backbone. Thus, the ability to introduce heterologous reductive segments such as ketoreductase (KR), dehydratase (DH), and enoylreductase (ER) into modules that naturally lack these activities would increase the power of the combinatorial biosynthetic toolbox. The dehydratase domain of module 7 of the rifamycin PKS, which is predicted to be nonfunctional in view of the sequence of the apparent active site, was replaced with its functional homolog from module 7 of rapamycin-producing polyketide synthase. The resulting mutant strain behaved like a rifC disrupted mutant, i.e., it accumulated the heptaketide intermediate and its precursors. This result points out a major difficulty we have encountered with all the Amycolatopsis mediterranei strain containing hybrid polyketide synthases: all the engineered strains prepared so far accumulate a plethora of products derived from the polyketide chain assembly intermediates as major products instead of just analogs of rifamycin B or its ansamycin precursors.