• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.575-577
• /
• 2017

In public key cryptography such as RSA, modular exponentiation is the most time-consuming operation. RSA's modular exponentiation can be computed by repeated modular multiplication. To attain high efficiency for RSA, fast modular multiplication algorithms have been proposed to speed up decryption/encryption. Montgomery multiplication is limited by the carry propagation delay from the addition of long operands. In this paper, we propose a hardware structure that reduces the area of the Montgomery multiplication implementation for lightweight applications of RSA. Experimental results showed that the new design can achieve higher performance and reduce hardware area. A frequency of 884.9MHz and 250MHz were achieved with 84K and 56K gates respectively using the 90nm technology.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1272-1278
• /
• 2011

Mechanisms of the robot system should be developed according to the task. In this study, we propose improving adaptability of the robot mechanism with the modularized joint mechanism. Adaptability is the measure of the system ability to cope with change or uncertainty. Modular type joint has been widely used in development of various robots including reconfigurable robots. To build robotic systems more flexibly and quickly with low costs of manufacturing and maintenance, we have designed a modular type joint with one degree of freedom for general purpose. This module is designed to be compact, light-weight and self-controlled. In this design, we consider the kinematics and dynamics properties of the modular type joint.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1270-1273
• /
• 2004

The mechanism design is synthesis of suitable mechanism which can be output motions about input motions. That has generally two steps which are the type synthesis and the dimensional synthesis. And required mechanism analysis step for confirming middle or final result. The type synthesis is definition of mechanism type which required aim and the dimensional synthesis is calculation of dimension about defined type mechanism. The type synthesis of mechanism is included qualitative design field which isn't defined systematic design method. especially, the most difficult step for mechanism design automation. In this paper proposed the component modular design method which is figured mechanism types automate with component modules using component modular approach. And develop CAD(Computer Aided Program) program for application.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.3
• /
• pp.3-10
• /
• 2000

In this paper we propose a bit-sliced modular multiplication algorithm and a bit-sliced modular multiplier design meeting the increasing crypto-key size for RSA public key cryptosystem. The proposed bit-sliced modular multiplication algorithm was designed by modifying the Montgomery's algorithm. The bit-sliced modular multiplier is easy to expand to process large size operands and can be immediately applied to RSA public key cryptosystem.

• Land and Housing Review
• /
• v.10 no.2
• /
• pp.59-67
• /
• 2019

The recent paradigm shift in the construction industry has led to a growing demand for industrial construction. In particular, interest in modular housing, one of the areas of industrialization architecture, is soaring. Modular housing is a construction method for completing a building by transporting factory-built modules to the site and assembling them. However, modular housing in Korea has various problems such as errors in design books, lack of factory drawings, and lack of on-site construction plans. BIM is a tool for accumulating, producing and managing various information through 3D models and is a solution to solve various problems of modular housing. In this study, problems of modular housing and BIM utilization of modular housing were presented as ways to ensure the quality of modular housing. Therefore, this study analyzed the problems that are occurring in the construction process of modular housing. And, to address the problem of modular housing, BIM utilization measures were proposed for each modular process step. However, the application of BIM in domestic modular project is currently being carried out in pilot research project. Because of this, the BIM utilize method for modular housing is limited based on the BIM use for general projects and the examples for some modular pilot projects.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.75-84
• /
• 2020

Modular construction is a construction method whereby prefabricated volumetric units are produced in a factory and are installed on site to form a building block. The construction productivity can be substantially improved by the manufacturing and assembly of standardized modular units. 3D printing is a computer-controlled fabrication method first adopted in the manufacturing industry and was utilized for the automated construction of small-scale houses in recent years. Implementing 3D printing in the fabrication of modular units brings huge benefits to modular construction, including increased customization, lower material waste, and reduced labor work. Such implementation also benefits the large-scale and wider adoption of 3D printing in engineering practice. However, a critical issue for 3D printed modules is the loading capacity, particularly in response to horizontal forces like wind load, which requires a deeper understanding of the building structure behavior and the design of load-bearing modules. Therefore, this paper presents the state-of-the-art literature concerning recent achievement in 3D printing for buildings, followed by discussion on the opportunities and challenges for examining 3D printing in modular construction. Promising 3D printing techniques are critically reviewed and discussed with regard to their advantages and limitations in construction. The appropriate structural form needs to be determined at the design stage, taking into consideration the overall building structural behavior, site environmental conditions (e.g., wind), and load-carrying capacity of the 3D printed modules. Detailed finite element modelling of the entire modular buildings needs to be conducted to verify the structural performance, considering the code-stipulated lateral drift, strength criteria, and other design requirements. Moreover, integration of building information modelling (BIM) method is beneficial for generating the material and geometric details of the 3D printed modules, which can then be utilized for the fabrication.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2002.05b
• /
• pp.204-205
• /
• 2002

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2015

Modular technology has become a major issue of the construction industries to enhance their productivity. Modular bridge construction generally requires the data exchange between the contractors, designers, fabricators and constructors. Therefore, a readily accessible information model interface module based on BIM technology is essential for their communication during a project life-cycle. In this study, BIM based information model interface module for a modular pier was developed. For the information models, the PBS(Product Breakdown Structure) and LOD(Level of Development) were defined. Next, all components of a modular pier were conducted by the parametric modeling technique, and then 3D cell library interface was developed. An nterface module was also developed using VBA(Visua basic Application) for exchanging a data from 3D model library to other softwares such as Microstation, AutoCad and Excel and was connected with MS Access database. The developed information model interface module would improve the design quality of the modular pier and reduce the time and cost for design. Updated 3D information models could be utilized for the fabrication, assembly, and construction process for modular piers.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.743-751
• /
• 1999

공개키 암호 시스템에서 모듈러 지수 연산은 주된 연산으로, 이 연산은 내부적으로 모듈러 곱셈을 반복적으로 수행함으로써 계산된다. 본 논문에서는 GF(2m)상에서 수행할 수 있는 Montgomery 알고리즘을 분석하여 right-to-left 방식의 모듈러 지수 연산에서 공통으로 계산 가능한 부분을 이용하여 모듈러 제곱과 모듈러 곱셈을 동시에 수행하는 선형 시스톨릭 어레이를 설계한다. 본 논문에서 설계한 시스톨릭 어레이는 기존의 곱셈기보다 모듈러 지수 연산시 약 0.67배 처리속도 향상을 가진다. 그리고, VLSI 칩과 같은 하드웨어로 구현함으로써 IC 카드에 이용될 수 있다.Abstract One of the main operations for the public key cryptographic system is the modular exponentiation, it is computed by performing the repetitive modular multiplications. In this paper, we analyze Montgomery's algorithm and design a linear systolic array to perform modular multiplication and modular squaring simultaneously. It is done by using common-multiplicand modular multiplication in the right-to-left modular exponentiation over GF(2m). The systolic array presented in this paper improves about 0.67 times than existing multipliers for performing the modular exponentiation. It could be designed on VLSI hardware and used in IC cards.