• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.263-272
• /
• 2016

모듈러 제품 설계는 유연한 제품 수정, 제품 개발 및 생산 리드타임 감소, 제품의 다양성 증대와 같은 많은 장점들이 있다. 모듈러 제품 설계의 목적은 여러 개의 모듈들로 구성된 제품의 아키텍쳐를 효율적으로 개발하는 것인데, 이들 모듈들은 컴포넌트들 간 물리적, 기능적 상호관계 분석을 토대로 컴포넌트들 간의 유사성을 최대화함으로써 만들어 질 수 있다. 본 연구에서는 모듈러 제품 설계의 핵심 작업인 모듈화를 위하여 3개 단계로 이뤄진 체계적인 절차를 제시하고자 한다. 첫 번째 단계는 컴포넌트들 간 물리적, 기능적 상호관계 분석을 통한 컴포넌트들 간 상관 관계 매트릭스를 구성하는 것이고, 두 번째 단계는 컴포넌트들 간 상관 관계를 최대화하는 컴포넌트들의 군집들을 찾아내기 위하여 네트워크 흐름으로 모델링하는 것이다. 마지막으로 세 번째 단계에서는 선형 계획 모형인 네트워크 흐름 모델을 풀어서 컴포넌트들의 군집들을 찾아내고 이들을 모듈화 하는 것이다. 본 연구에서 제시한 절차의 이해와 실제 적용을 위하여 진공 청소기 모듈화 사례에 적용해 보고 절차의 타당성을 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.143-144
• /
• 2016

The circulating current control within the phase legs is one of the main control objectives in a modular multilevel converter (MMC) under different operating conditions. This paper proposes a control strategy of circulating currents in the MMC under unbalanced voltage by using a proportional-resonant (PR) controller. Under the unbalanced voltage, the circulating currents in the MMC consists of three components such as positive-sequence, negative-sequence, and zero-sequence circulating currents. With the PR controller, all components of the circulating current will be directly controlled in the stationary reference frame without decomposing into positive- and negative-sequence components. Thus, the ripples in the circulating currents and the DC current are suppressed under the unbalanced voltage. The effectiveness of the proposed method is verified by simulation results based on PSCAD/EMTDC simulation program.

• 토지주택연구
• /
• 제10권3호
• /
• pp.67-75
• /
• 2019

The modular construction means that more than 70% of the parts such as walls, windows, electrical wiring, facility piping, bathrooms, and kitchen appliances are pre-assembled at the factory and transported to the site. It is possible to shorten the construction period than general construction work and to secure high quality through modular mass production since the modular construction works in the field at the same time as the modular production. However, there are only four domestic modular manufacturers, and each company's modular components and construction methods are different, so it is necessary to standardize them. Therefore, this study investigated the construction process centering on the stacking method of modular housing construction work applied to D site in Cheonan-si, and proposed the key points of quality management by construction stage. As the project was conducted as a pilot project for government R&D projects, some differences may occur from general modular housing construction. However, the construction process and quality control focus of each unit box type modular house analyzed in this study can be used as basic data in the future of modular housing construction. In addition, the results of this study can be used to establish construction standards, such as the development of checklists and establishment of standard processes.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1997년도 추계학술대회발표논문집; 홍익대학교, 서울; 1 Nov. 1997
• /
• pp.121-124
• /
• 1997

This paper is concerned with the generation and use of modular BOM, which is typically utilized in representing product configurations for two-level master production schedule. A method called VCM (Value Clustering Method) is proposed to build modular BOMS. We adopted a where-used matrix to represent part-product relationships. VCM is a method that can identify modules of components based on the where-used matrix. The method uses product family group value, product value, and component value. This can facilitate retrieving information about modules, finding out alternative usage pattern of components, and recognizing modules used in a particular product.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.491-495
• /
• 2002

In the paper, a Visual factory model for a optical-components manufacturing process is built. The optical-components manufacturing process is composed of 3 operation processes; optical sub assembly process, package assembly process, and fiber assembly process. Each process is managed not a batch mode, which is one of most popular manufacturing styles to produce a great deal of industrial output, but though a modular cell. In the processes, a modular cell has to be processed independently of the other cells. Optimization for the composition of assembly cell in the optical-components system is made by the Visual factory model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.636-639
• /
• 2002

In the paper, a Visual factory model for a optical-components manufacturing process is built. The optical-components manufacturing process is composed of 3 operation processes; optical sub assembly process, package assembly process, and fiber assembly process. Each process is managed not a batch mode, which is one of most popular manufacturing styles to produce a great deal of industrial output, but though a modular cell. In the processes, a modular cell has to be processed independently of the other cells. Optimization for the composition of assembly cell in the optical-components system is made by the Visual factory model.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.310-315
• /
• 1997

System-Integrated Modular Advanced Reactor (SMART), where major primary components such as modular helical steam generator and self regulating pressurizer are integrated into reactor vessel, is currently under development. The pressurizer is designed to control the primary pressure mainly with partial pressure of nitrogen gas and to maintain the fluid temperature as low as possible for the purpose of minimizing steam contribution. The steam generator (SG) is designed to produce super-heated steam inside tube at power operation. Because the in-vessel pressurizer and in-vessel SG are classified as the characteristic components of SMART, it is important to perform a steady state calculation of these components in order to evaluate the adoption of these components. A steady state analysis of the in-vessel pressurizer and in-vessel SG has been performed under normal power operation and the results show an acceptable performance of the components.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.46-53
• /
• 2002

In order to overcome the conventional robot's physical limitation to frequent changes in operational requirements, it is quite appealing to modularize its system components and allow them to be combined into various configurations to best suit the needs to a particular application. Several researchers have presented the concept of modular robot. In this paper, the kinematics and dynamics of modular robot are studied, which concretes the concept of modular robot. This study includes the selection of individual module, the definition of their parameters and the development of module based manipulate. analysis software package (MBMAP).

• Structural Engineering and Mechanics
• /
• 제24권5호
• /
• pp.561-584
• /
• 2006

The paper presents results of parametric studies, and an overall approach for the design of a modular bridge system which incorporates a steel-reinforcement free concrete slab cast on top of carbon FRP stiffened deck panels which act as both structural formwork and flexural reinforcement, spanning between hollow box type FRP girders. Results of the parametric studies are highlighted to elucidate important relationships between critical configurational parameters and empirical equations based on numerical studies are presented. Results are discussed at the level of the individual deck and girder components, and as a slab-on-girder bridge system. An overall design methodology for the components and bridge system including critical performance checks is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.133.4-133
• /
• 2001

In the paper, a Visual factory model for a optical-components manufacturing process is built. The optical-components manufacturing process is composed of 3 operation processes; optical sub assembly process, package assembly process, and fiber assembly process. Each process is managed not a batch mode, which is one of most popular manufacturing styles to produce a great deal of industrial output, but though a modular cell. In the processes, a modular cell has to be processed independently of the other cells. Optimization for the composition of assembly cell in the optical-components system is made by the Visual factory model.