• 마이크로전자및패키징학회지
• /
• 제20권3호
• /
• pp.11-18
• /
• 2013

Interest in copper nanoparticles has increased as an alternative for substituting silver nanoparticles because of its lower cost and less electromigration effect than silver. In this paper, the recent research trends and main results in wet-chemical synthesis of sub-100 nm Cu nanoparticles were summarized. The characteristics of synthesis were discussed with a classification such as modified polyol synthesis, modified hydrothermal synthesis, solvothermal synthesis, and the others, focussing on effects of capping agents, reductants, and pH. Information on the oxidation of synthesized copper nanoparticles were additionally commented.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 임시총회 및 하계학술연구발표회
• /
• pp.148-148
• /
• 2014

• 공업화학
• /
• 제16권1호
• /
• pp.93-100
• /
• 2005

두 종류의 4관능 폴리에스터 폴리올에 대해 trimellitic anhydride와 glycidyl metacrylate를 반응하여 두 종류의 8관능 광경화형 폴리에스터 폴리올 변성 하이퍼브랜치 메타아크릴레이트를 합성하고 광경화된 필름의 물성을 조사하였다. Thermogravimetric analyzer (TGA)로 측정한 UV 경화필름의 열안정성은 HBMA-2 (hyperbranched methacrylate-2)가 HBMA-1 (hyperbranched methacrylate-1)보다 우수하였다. 또한 HBMA-2가 HBMA-1보다 경도, 내마모성, 인장강도가 우수하였으며, 내후성 테스트에서도 HBMA-2의 yellow index 값이 높은 결과를 보여주었다.

• 마이크로전자및패키징학회지
• /
• 제19권2호
• /
• pp.61-66
• /
• 2012

Bismuth(III) carbonate basic을 전구체로 사용하여 상온 습식 환원법인 변형 폴리욜법으로 순수 비스무트 나노입자를 합성하면서 캡핑제 또는 표면 안정제의 교체 및 용매의 종류에 따른 비스무트 입자의 제조 특성을 각각 관찰하였다. Polyvinylpyrroldone(PVP) 캡핑제 첨가 조건에서 합성 직후 기준으로 diethylene glycol(DEG) 용매 사용 시 가장 미세한 비스무트 나노입자가 형성되었으며, polyethylene glycol(PEG) 용매 사용 시 가장 조대한 비스무트 나노입자가 합성되었다. 합성 직후에 관찰된 나노입자의 크기와 건조 후 합체 및 엉겨붙음 거동으로 성장한 입자의 크기는 잘 비례하였는데, DEG 용매 사용 시 최종 단계에서 수십 nm~약 300 nm 직경의 가장 미세한 비스무트 입자를 얻을 수 있었다. 또한 캡핑제 및 표면 안정제의 종류에 상관없이 PEG 용매를 사용하여 합성한 경우에서는 광범위한 합체 및 엉겨붙음 거동이 관찰되어 상대적으로 조대한 입자들이 뭉친 형태의 최종 시료가 얻어졌다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1290-1292
• /
• 2009

Modified-polyol protocol was utilized for synthesis of green-emitting ($^5D_4-^7F_j$ transitions of $Tb^{3+}$ ion) nanocrystalline $LaPO_4:Ce^{3+}$, $Tb^{3+}$ phosphors. Experimental parameters including chemical composition and annealing temperature were optimized to produce highly efficient, uniformly sized nanophosphors. Spin-deposited layer of $LaPO_4:Ce^{3+}$, $Tb^{3+}$ nanophosphors on glass substrate exhibited a transmittance of more than 80 %, indicating their efficacy for transparent display.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.560-563
• /
• 2008

A modified polyol process is developed to enhance Pt loading during the preparation of Pt/C catalysts. With the help of the zeta potential, the effect of pH on the electrostatic forces between the support and the Pt colloid is investigated. It is shown experimentally that the surface charge on the carbon support becomes more electropositive when the solution pH is changed from alkaline to acidic. However, this change does not affect the electronegative surface charge of Pt colloids already attained and stabilized by glycolate anions. This new behavior caused by the change in the solution pH accounts for the enhanced yield of the process and does not affect the Pt particle size. All our experimental results reveal that this simple modification is a cost effective method for the synthesis of highly Pt loaded Pt/C catalysts for fuel cells.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.578-584
• /
• 2014

To synthesize Sn nanoparticles (NPs) less than 30 nm in diameter, a modified polyol process was conducted at room temperature using a reducing agent, and the effects of different pH values of the initial solutions on the morphology and size of the synthesized Sn NPs were analyzed. tin(II) 2-ethylhexanoate, diethylene glycol, sodium borohydride, polyvinyl pyrrolidone (PVP), and sodium hydroxide were used as a precursor, reaction medium, reducing agent, capping agent, and pH adjusting agent, respectively. It was found by transmission electron microscopy that the morphology of the synthesized Sn NPs varied according to the pH of the initial solution. Moreover, while the size decreased to 11.32 nm with an increase up to 11.66 of the pH value, the size increased rapidly to 39.25 nm with an increase to 12.69. The pH increase up to 11.66 dominantly promoted generation of electrons and increased the amount of initial nucleation in the solution, finally inducing the reduced-size of the Sn particles. However, the additional increase of pH dominantly induced a decrease of PVP by neutralization, which resulted in acceleration of the agglomeration by collisions between particles.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.300-309
• /
• 2010

Melamincyanurate(MC), as an non halogen flame retardant are used as the polymer and plastic materials. In this study, melamine and cyanuric acid were used for the synthesis of MC. The optimum condition of synthetic MC were controlled by different molar ratio of melamine to cyanuric acid. MC was modified by coupling reaction with four different agents. The influences of modified MC were based on the coupling agent types. Preparation methods are available to offer the prospect of improved morphology control deposit stability in polyol. The results reveal that glycidoxypropyltrimethoxysilane(GDS) has the best storage stability. The best properties were obtained with melamine and cyanuric acid from 1:1 molar ratio. Modification of MC through coupling agent can efficiently enhanced the deposit stability in polyol up to 30 %.

• 접착 및 계면
• /
• 제22권1호
• /
• pp.8-15
• /
• 2021

본 연구에서는 우레탄 변성 에폭시의 유연성 부여를 위해 propylene glycol(PPG) 기반 diamine인 Jeffamine D-400을 이용하여 폴리올을 만들고 이를 이용하여 우레탄 변성 에폭시를 합성하였다. Bisphenol A diglycidyl ether(BADGE)에 합성한 우레탄 변성 에폭시와 경화제, 경화촉진제를 배합하여 에폭시 접착제를 제조하고 접착강도 측정으로 전단 강도를 측정하였다. 측정 결과 합성한 우레탄 변성 에폭시의 우레탄 결합과 PPG사슬 도입을 통한 유연성 부여 효과로 인해 전단 강도와 전단 신율이 증가하는 경향을 보였다. 이러한 결과는 높은 가교 밀도로 인해 사용에 제약을 받고 있는 구조용 접착제에 적용이 가능할 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3145-3150
• /
• 2010

Ruthenium catalysts modified by selenium have been introduced as alternative materials to Pt in Direct methanol fuel cells (DMFCs). RuSe nano-particles were synthesized on the Vulcan XC72R carbon supports via polyol method. The prepared catalysts were electrochemically and physically characterized by cyclic voltammetry (CV,) linear sweep voltammetry, methanol tolerance test, X-ray diffraction (XRD), Transmission electron microscopy (TEM), Energydispersive Spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Increasing the Se concentration up to 20 at % increased the electro-catalytic activity for the oxygen reduction. By increasing Se amount, Ru metallic form on the surface was increased. The $Ru_{80}Se_{20}$/C catalysts showed the highest oxygen reduction reaction (ORR) activity and outstanding methanol tolerant property in half cell tests as well as single cell test.