• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.873-878
• /
• 2001

This Paper Presents a new model, called the “shear-friction truss model,” for slender reinforced concrete beams to derive a clear and simple equation for their ultimate shear strength. In this model, a portion of the shear strength is provided by shear reinforcement as in the traditional truss model, and the remainder by the shear-friction mechanism. Friction resistance is derived considering both geometrical configuration of the rough crack surface and material Properties. The inclined angle of diagonal strut in the traditional truss model is modified to satisfy the state of balanced failure, when both stirrups and longitudinal reinforcement yield simultaneously. The vertical component of friction resistance is added to the modified truss model to form the shear-friction truss model. Test results from published literatures are used to find the effective coefficient of concrete strength in resisting shear on inclined crack surfaces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.407-411
• /
• 2009

This study presents the analysis of the identifications and determinations of the material parameters in the developed model in the former paper and their effects on the stress paths. It was shown that the influences of the parameters, specially involved in the strain rate and the viscous nucleus, were in generally acceptable range. From this point, the model was modified by identifying the plastic yield surface and the viscous yield surface in the same mathematical form. The modified model was successful in simulating stress path.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.651-658
• /
• 2009

Nonlinear sliding surface design in variable structure systems for spacecraft attitude control problems is studied. A robustness analysis is performed for regular form of system, and calculation of actuator bandwidth is presented by reviewing sliding surface dynamics. To achieve non-singular attitude description and minimal parameterization, spacecraft attitude control problems are considered based on modified Rodrigues parameters (MRP). It is shown that the derived controller ensures the sliding motion in pre-determined region irrespective of unmodeled effects and disturbances.

• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.555-562
• /
• 1998

Modified fluid critical solid fraction method was utilized as a prediction parameter to describe the shrinkage formation including the position, shape and amount of shrinkage cavities. A numerical scheme was implemented adapting this method for the evaluation of solidification defects in various casting processes. In the present numerical code, the form of shrinkage cavity can be simultaneously determined when an isolated loop is predicted to occur by the fluid critical solid fraction method. An auxiliary parameter, shrinkage potential, was also used in order to calculate the amount of residual liquid during solidification. Solidification analysis was carried out for the validation of the present scheme. It was shown that the calculated results were in good agreement with those of practical casting runs in all of the casting processes envolved in the present research. It may be concluded that the present program successfully predicts the detailed shrinkage formation behavior without the consideration of interdendritic fluid flow analysis.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.473-476
• /
• 2000

The network reliability is to be computed in terms of the terminal reliability. The computation of a termini reliability is started with a Boolean sum of products expression corresponding to simple paths of the pair of nodes. This expression is then transformed into another equivalent expression to be a Disjoint Sum of Products form. But this computaion of the terminal reliability obviously does not consider the communication between any other nodes but for the source and the sink. In this paper, we derive the overall network reliability which is the probability of communication that each node in the network communicates with all other remaining nodes. For this, we propose a method to make the SOP disjoint for deriving the network reliability expression from the system success expression using the modified Sheinman's method and modified BDD method.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.1
• /
• pp.88-96
• /
• 1989

General measure in the reliability is the k-terminal reliability, which is the probability that the specified vertices are connected by the working edges. To compute the k-terminal reliability components are usually assumed to be statistically independent. In this study the modeling and analysis of the k-terminal reliability are investigated when dependency among components is considered. As the size of the network increases, the number of the joint probability parameter to represent the dependency among components is increasing exponentially. To avoid such a difficulty the structured-event-based-reliability model (SERM) is presented. This model uses the combination of the network topology (physical representation) and reliability block diagram (logical representation). This enables us to represent the dependency among components in a network form. Computational algorithms for the k-terminal reliability in SERM are based on the factoring algorithm Two features of the ractoring algorithm are the reliability preserving reduction and the privoting edge selection strategy. The pivoting edge selction strategy is modified by two different ways to tackle the replicated edges occuring in SERM. Two algorithms are presented according to each modified pivoting strategy and illustrated by numerical example.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.589-595
• /
• 2000

Densification behavior of SiC powder was investigated under cold compaction. A special form of the Cap model was proposed from experimental data of SiC powder under triaxial compression. To compare with experimental data of SiC powder under cold compaction, the proposed constitutive model was implemented into a finite element program (ABAQUS). Finite element calculations from the Cam-Clay model and the modified Drucker-Prager model were also compared with experimental data of SiC powder. The agreements between experimental data and finite element results obtained from the proposed constitutive model are reasonably good. In die pressing, finite element results obtained from the Cam-Clay model and the modified Drucker-Prager model, however, show lower average density of SiC powder compacts compared to experimental data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.177.4-177
• /
• 2001

In this paper, we propose a new type of nonlinear fixed interval smoothing filter which is modified from the existing nonlinear smoothing filter. A nonlinear smoothing filter is derived from two-filter formulas. For the backward filter, the propagation and update equation of error states are derived. Particularly the modified update equation of the backward filter use the estimated error terms from the forward filter. Smoothing algorithm is altered into the compatible form with the new type of the backward fitter. An advantage of the proposed algorithm is more efficient than the existing one because propagation in backward filter is very simple from the implementation point of view. We apply the proposed nonlinear smoothing ...

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.2
• /
• pp.86-90
• /
• 2018

About one-third of patients with transsphenoidal basal encephaloceles have associated congenital anomalies, including cleft palate. Moreover, they are often plagued by symptomatic exacerbations in the form of upper respiratory obstructions, cerebrospinal fluid leaks, meningitis, etc., with few patients being asymptomatic. We herein present a rare asymptomatic case of transsphenoidal basal encephalocele in an 18-month-old child with cleft palate and highlight a modified version of two-flap palatoplasty.

• Journal of the Korean Society of Costume
• /
• v.56 no.3 s.102
• /
• pp.57-72
• /
• 2006

Culture speaks for the characters of the period, so it is presented by the mutual actions of many factors affecting culture. Foreign culture, introduced by cultural exchange, was modified and accepted into a new form and value system. In the beginning, only foreigners danced these dances, but Chinese started to dance them gradually. Thus, the dancing costume showed the complete fusion of Chinese and exotic styles. Especially, in the Tang dynasty, Chinese accepted foreign culture very actively and with open hearts. They accepted foreign culture based on their traditional culture, and fused them completely. In these costumes, not one culture was prominent, but many cultures from Gandhara to East and West Turkistan and even to Persian and Hellenism were synthesized together. Chinese, in the Tang dynasty, retained on their traditional culture and modified new foreign culture into Chinese style.