• 제목/요약/키워드: modified capacity spectrum method

검색결과 9건 처리시간 0.03초

수정된 능력스펙트럼을 이용한 건축구조물의 내진성능평가 (Seismic Performance Evaluation of Building Structures Using Modified Capacity Spectrum)

  • 최원호
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.267-274
    • /
    • 2000
  • Current seismic design codes for building structures are based on the method which can provide enough capacity to satisfy objected performance level and exactly evaluate the seismic performance of buildings. The capacity spectrum method using the nonlinear static(pushover) analysis is becoming a popular tool for evaluating the seismic performance of existing and new building structures. By means of a graphical procedure capacity spectrum method esimates the performance level of structure by comparing the capacity of structure with the demand of earthquake ground motion on the structure. In the method the relation between base shear estimated by a nonlinear static analysis and horizontal displacement is used. Capacity spectrum is usually expressed as what represent the responses of the equivalent single degree of freedom (ESDOF) system for the building structures. However there are some problems in converting procedures into ESDOF system which include not considering the effect of higher modes of structures. The objective of this paper is to compare and verify existing methods and suggest the modified capacity spectrum for seismic performance evaluation of building structures.

  • PDF

Thermodynamic Properties of the Modified Yukawa Potential

  • Okorie, U.S.;Ibekwe, E.E.;Ikot, A.N.;Onyeaju, M.C.;Chukwuocha, E.O.
    • Journal of the Korean Physical Society
    • /
    • 제73권9호
    • /
    • pp.1211-1218
    • /
    • 2018
  • Within the framework of the modified factorization method, we solve the $Schr{\ddot{o}}dinger$ equation with the modified Yukawa potential. The energy spectrum is obtained using the Pekeris approximation scheme for the centrifugal term. The thermodynamic properties, including the vibrational partition function, vibrational mean energy, vibrational mean free energy, vibrational specific heat capacity and vibrational entropy, are calculated. As a special case, we compare our result with that work of Dong [Int. J. Quant. Chem. 107, 366 (2007)] and find good agreement.

역량스펙트럼 방법과 수정변위계수법을 이용한 다경간 교량의 내진성능 평가 (Seismic Performance Evaluation of Multi-Span Bridges using CSM and modified DCM)

  • 남왕현;송종걸;정영화
    • 산업기술연구
    • /
    • 제26권B호
    • /
    • pp.119-126
    • /
    • 2006
  • Capacity spectrum method(CSM) of ATC-40(1996) and displacement coefficient method(DCM)of FEMA-273(1997) are applied to evaluate the seismic performance of bridges. In this study, equivalent response is obtained from nonlinear static analysis for the 3spans continues bridge and nonlinear maximum displacement response is calculated using CSM and DCM. Nonlinear maximum displacement response of DCM is larger than this of CSM. It is method that DCM can evaluate target displacement and ductility of structural to be easy and simple, but tend to overestimate the maximum displacement response. Therefore, this method is mainly used at preparation design level to evaluate the structural response. It is not desirable to evaluate the seismic performance using DCM.

  • PDF

면진격리 고무베어링 설계법을 이용한 구조물의 성능점 예측 (Determination of Structural Performance Point Utilizing The Seismic Isolation Rubber Bearing Design Method)

  • 김창훈;좌동훈
    • 한국지진공학회논문집
    • /
    • 제7권3호
    • /
    • pp.23-30
    • /
    • 2003
  • 면진격리 고무베어링의 설계법을 수정하여 구조물의 성능점 예측을 위한 간편한 해석방법을 제안하였다. 이러한 적용이 가능한 것은 구조물이 지진력의 작용으로 인하여 손상을 입게 되면 구조물의 항복 후 강성은 연화되고, 이로 말미암아 구조물의 동적 특성이 장주기화 하기 때문이다. 제안된 해석법이 기존의 방법에 비하여 우월한 것은 능력스펙트럼법이 요구하는대로 보유능력곡선과 요구량스펙트럼을 가속도-변위 좌표계로 치환하지 않고서도 비교적 정확한 성능점을 예측할 수 있다는 것이다. 제안된 방법의 타당성은 문헌에서 보이는 정확한 값과의 비교에 의하여 입증하였다.

건축구조물의 시스템 연성요구도 평가를 위한 대표응답의 활용 (Responses of Equivalent SDOF System for System Ductility Demands Evaluation of Multistory Building Structures)

  • 최원호;이동근
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.446-453
    • /
    • 2001
  • System-level ductility is an essential parameter for seismic performance evaluation of multistory building structures. The ductility demands for single degree of freedom structures or individual structural members can be determined easily. However, there is no clearly established method to determine the ductility demands for structural systems. The system ductility demands are estimated in this study by the equivalent SDOF system methods and proposed method which used the representative responses obtained from the MDOF systems directly. And seismic performance of building structures is evaluated by the modified Capacity Spectrum Method using the representative responses, and the result was compared with those of the inelastic time history analysis.

  • PDF

내진성능평가를 위한 다자유도 교량의 수정 비선형 등가정적해석법 (Modified Nonlinear Static Pushover Procedures of MDOF Bridgesfor Seismic Performance Evaluation)

  • 조창근;김영상;배수호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권4호
    • /
    • pp.175-184
    • /
    • 2006
  • 다자유도의 교량에 횡방향 지진하중을 받는 경우, 교량의 내진성능설계 및 성능평가를 위한 두 가지 비선형 등가 정적해석절차를 제시하였다. 빌딩구조물에 대한 FEMA-273의 변위계수법과 ATC에서 채택하고 있는 역량스펙트럼법을 개선하여 다자유도 연속교량의 내진성능평가에 적용토록 제시하였다. 수정된 두 방법들에 대한 적합성을 시간이력 동적해석과 비교토록 하였다. 다자유도 교량의 교축직각방향 관성력 분포를 합리적으로 반영하기 위하여, 수평방향 지진하중의 분포형태에 따른 모드 및 스펙트럴 하중분포를 적용토록 하였다. 철근 콘크리트 교각 부재는 하중-기초법에 의한 비선형 층상화 골조 유한요소 모델을 사용하여 교량 구조물을 모델링 하였다.

Analysis of Joint Transmit and Receive Antenna Selection in CPM MIMO Systems

  • Lei, Guowei;Liu, Yuanan;Xiao, Xuefang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권3호
    • /
    • pp.1425-1440
    • /
    • 2017
  • In wireless communications, antenna selection (AS) is a widely used method for reducing comparable cost of multiple RF chains in MIMO systems. As is well known, most of literatures on combining AS with MIMO techniques concern linear modulations such as phase shift keying (PSK) and quadrature amplitude modulation (QAM). The combination of CPM and MIMO has been considered an optimal choice that can improve its capacity without loss of power and spectrum efficiency. The aim of this paper is to investigate joint transmit and receive antenna selection (JTRAS) in CPM MIMO systems. Specifically, modified incremental and decremental JTRAS algorithms are proposed to adapt to arbitrary number of selected transmit or receive antennas. The computational complexity of several JTRAS algorithms is analyzed from the perspective of channel capacity. As a comparison, the performances of bit error rate (BER) and spectral efficiency are evaluated via simulations. Moreover, computational complexity of the JTRAS algorithms is simulated in the end. It is inferred from discussions that both incremental JTRAS and decremental JTRAS perform close to optimal JTRAS in BER and spectral efficiency. In the sense of practical scenarios, adaptive JTRAS can be employed to well tradeoff performance and computational complexity.

성능기반설계에 기초한 성능영향인자 변화에 따른 기둥의 거동분석 (Behavior of Columns Due to Variation of Performance Influencing Factors Based on Performance Based Design)

  • 윤성환;최민철;강윤식;박대효
    • 콘크리트학회논문집
    • /
    • 제22권4호
    • /
    • pp.489-498
    • /
    • 2010
  • 철근 콘크리트 구조물의 명확한 성능평가를 수행하기 위해 재료 및 구조적 특성이 구조물에 미치는 영향에 대한 분석이 필요하다. 구조물의 성능에 영향을 미치는 성능영향인자는 구조물의 재료적 특성인 콘크리트 강도, 종방향주철근, 횡구속 철근, 구조적 특성인 형상비, 축하중에 대하여 총 5가지로 정의하였다. 각각의 성능영향인자 변화에 따른 고유치 해석과 비선형 정적해석을 수행하여 각각의 성능영향인자들이 구조물의 항복 변위와 항복 기저전단력 및 연성비의 정적성능에 미치는 영향을 분석하였다. 또한 비선형 정적해석의 결과를 이용하여 FEMA-440에서 제안된 수정된 능력스펙트럼법을 이용하여 성능평가를 수행하였고, 이에 따라 구조물의 성능점을 도출하였으며 각각의 성능영향인자가 미치는 영향을 분석하였다. 성능영향인자 변화에 따른 해석 결과, 고유치해석과 비선형 정적해석의 따른 고유주기와 연성비는 구조적 특성이 재료적 특성에 비해 구조물에 더 큰 영향을 미치는 것으로 나타났고, 그 중 형상비의 영향이 가장 크게 작용하였으며, 수정된 능력스펙트럼법을 이용한 성능평가 결과, 고유주기와 연성비와 마찬가지로 구조적 특성 중 형상비의 영향이 가장 크게 작용하였다.

Seismic analysis of bridges based on stress-dependent damping

  • Su, Li;Wang, Yuanfeng;Li, Pengfei;Mei, Shengqi;Guo, Kun
    • Structural Engineering and Mechanics
    • /
    • 제62권3호
    • /
    • pp.281-289
    • /
    • 2017
  • Damping value has considerable influence on the dynamic and seismic behaviors of bridges. However, currently the constant damping ratios that are prescribed by most bridge seismic design codes can't truly represent the complicated damping character of actual structures. In this paper, a cyclic loading experiment was conducted to study the effect of stress amplitude on material damping of concrete to present an analyzing model of the material damping of concrete. Furthermore, based on the fundamental damping of structure measured under ambient vibration, combined with the presented stress-dependent material damping concrete, the seismic response of a bridge pier was calculated. Comparison between the calculated and experiment results verified the validity of the presented damping model. Finally, a modified design and analysis method for bridge was proposed based on stress-dependent damping theory, and a continuous rigid frame bridge was selected as the example to calculate the actual damping values and the dynamic response of the bridge under different earthquake intensities. The calculation results indicated that using the constant damping given by the Chinese seismic design code of bridges would overestimate the energy dissipation capacity of the bridge.