• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.69-75
• /
• 2015

PURPOSES : The hydrated lime-modified asphalt, which improves moisture resistance, is normally used for pavements to reduce the number of potholes. However, the method of applying the material properties of the lime-modified asphalt mixture for use in pavements is not covered in the Korean Pavement Research Program (KPRP). The objective of this research is to find a method for the design application of lime-modified asphalt's material properties to the KPRP. METHODS: The section for test design is selected in some conditions which are related to the level of design regarding Annual Average Daily Traffic (AADT). To define the application methods of hydrated lime in the KPRP, the models of fatigue, rut and international roughness index (IRI) are determined based on the M-EPDG test results from some earlier research results. Moreover, it is well known that dynamic moduli of the unmodified mixture are not different from those of the lime-modified mixture. RESULTS: The performance results of hydrated lime-modified asphalt pavement were not very much different from those of the unmodified pavement, which meant the limited design regulations regarding fatigue failure, rutting deformation and IRI. CONCLUSIONS: The KPRP uses the weather model from the data for previous 10 years. It implies that the KPRP cannot predict abnormal climate changes accurately. Hence, the predictive weather data regarding the abnormal climate changes are unreliable. Secondly, the KPRP cannot apply the moisture resistance of asphalt mixtures. Therefore, a second level of design study will have to be performed to reflect the influence of moisture. It means that the influence on pavement performance can be changed by the application of hydrated lime in asphalt mixture design.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.91-97
• /
• 2016

PURPOSES : The objective of this paper is to develop a pavement performance model based on the Bayesian algorithm, and compare the measured and predicted performance data. METHODS : In this paper, several pavement types such as SMA (stone mastic asphalt), PSMA (polymer-modified stone mastic asphalt), PMA (polymer-modified asphalt), SBS (styrene-butadiene-styrene) modified asphalt, and DGA (dense-graded asphalt) are modeled in terms of the performance evaluation of pavement structures, using the Bayesian algorithm. RESULTS : From case studies related to the performance model development, the statistical parameters of the mean value and standard deviation can be obtained through the Bayesian algorithm, using the initial performance data of two different pavement cases. Furthermore, an accurate performance model can be developed, based on the comparison between the measured and predicted performance data. CONCLUSIONS : Based on the results of the case studies, it is concluded that the determined coefficients of the nonlinear performance models can be used to accurately predict the long-term performance behaviors of DGA and modified asphalt concrete pavements. In addition, the developed models were evaluated through comparison studies between the initial measurement and prediction data, as well as between the final measurement and prediction data. In the model development, the initial measured data were used.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.29-36
• /
• 2012

PURPOSES : Plastic deformation is frequently made in intersection asphalt pavement at its early age due to deceleration and stoppage of vehicles. This study has been performed to provide a mechanistic basis for reasonable selection of paving method to minimize the plastic deformation at intersection. METHODS : Pavement layer, temperature, traffic volume of the intersections managed by the Daejeon Regional Construction and Management Administration were collected to calculate asphalt dynamic modulus with pavement depth by using a prediction equation suggested by the Korean pavement design guide. Performance of ordinary dense-graded asphalt pavement, polymer modified asphalt pavement, and fiber reinforced asphalt pavement was analyzed by finite element method and the results were used in a performance model to predict the plastic deformation. RESULTS : In aspect of performance, the three paving methods were usable under low traffic while the fiber reinforced asphalt pavement was the most suitable under heavy traffic. CONCLUSIONS : Reasonable paving method suitable for traffic characteristics in the intersection might be decided by considering economic feasibility.

• 한국도로학회논문집
• /
• 제4권3호
• /
• pp.25-33
• /
• 2002

국가 기간산업의 중추 역할을 수행하는 일반 국도는 대부분 일반 아스팔트 포장으로 되어 있으며, 최근 들어 고온 및 중차량의 증대로 인해 포장의 수명이 급격히 줄어들고 있는 실정이다. 이런 이유로 많은 경우 신설포장에 대해서는 SMA. 개질아스팔트 등 특수포장이 적용되고 있다. 그러나 어떤 경우에 특수 포장을 채택할 것인가에 대한 적용 기준이 명확히 제시되어 있지 않아 설계 실무자들이 포장형식 선정을 위한 의사 결정에 많은 어려움이 있다. 본 연구에서는 이에 대한 부분적인 해결책으로 과거 10여 년 동안 수행된 국도 포장유지관리시스템의 자료를 이용하여 교통량에 따른 일반 아스팔트포장의 수명을 분석하였다. 분석결과 신설포장은 9.5년, 덧씌우기 포장은 5.6년으로 나타났다. 또한 현재의 포장 수명에 대한 분포 자료를 이용하여 설계 수명인 10년을 공용하기 위한 교통량을 신뢰수준에 따라 제시하였다. 그 결과 90%의 신뢰수준에서는 8.2ton 표준 축하중 2,300 ESAL, 80% 신뢰수준에서는 8.2ton 표준 축하중 1,500 ESAL로 나타났다 즉, 여기서 제시된 교통량보다 많은 구간에 대해서는 특수 포장의 적용을 검토할 것을 제안한다.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.153-160
• /
• 2009

본 연구에서는 국내 LTPP 구간에서 수행된 FWD 시험의 결과를 바탕으로 섬유보강, 폴리머 개질, 일반 아스팔트 포장의 구조적 성능을 비교 평가하였다. FWD 시험 결과, 표층 하단부의 인장변형량이 섬유보강 아스팔트는 29%, 폴리머 개질 아스팔트는 21% 저감되는 것을 확인하였다. 또한 FWD 처짐량을 역산하여 각 층의 탄성계수를 추정한 후 이를 바탕으로 AASHTO 설계방법, 구조적 해석 방법 및 생애주기비용분석을 통해 섬유보강 및 폴리머 개질 아스팔트 포장의 비용 효과를 분석하였다. 분석 결과, 섬유보강은 약 5cm, 폴리머 개질은 약 3cm의 아스팔트 층 두께 감소 효과를 보여주었다. 그러나 섬유보강 및 폴리머 개질 아스팔트의 고가격으로 인하여 전체 시공재료비는 일반 아스팔트 포장에 비해 상승하는 결과를 보여주었다. 생애주기비용 결과는 초기 공사비는 섬유보강 및 폴리머 개질 아스팔트 포장이 높지만, 유지관리비용 및 사용자비용은 감소하는 것으로 나타났다.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.7-13
• /
• 2018

PURPOSES : In order to apply high-speed weigh-in-motion (HS WIM) systems to asphalt pavement, three high-durability asphalt concrete mixtures installed with a WIM epoxy are evaluated. METHODS : In this study, dynamic stability, number of loading repetitions to reach the rut depth of 1 mm, and rut depth measurements of three asphalt mixtures at $60^{\circ}C$ were compared using an Asphalt Pavement Analyzer (APA). Laboratory-fabricated material and field core samples were prepared and tested according to KS F2374. RESULTS : Through the laboratory tests, it was found that all three modified asphalt mixtures (stone-mastic, porous, and semi-rigid) with WIM epoxy showed favorable permanent deformation results and passed the dynamic stability criterion of 3000 loading repetitions per 1 mm. In addition, it was confirmed that the modified SMA mixtures cored from the field construction yields satisfactory rutting testing results using the APA. Finally, the epoxy used for the HS WIM installation shows good adhesion with the three asphalt mixtures and permanent deformation resistance.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.53-60
• /
• 2010

섬유보강 아스팔트 포장은 신설뿐만 아니라 유지보수를 위한 덧씌우기에도 적용 가능한 포장 유형이다. 섬유보강재를 아스팔트 층 사이에 설치하여 하부 층에 이미 발생된 균열을 정지시키거나 지연시키고 러팅을 저감할 수 있다. 본 연구에서는 섬유보강 아스팔트 포장과 일반 또는 개질 아스팔트 포장의 공용성을 비교하기 위하여 균열율, 러팅, 종단평탄성, 그리고 처짐을 조사하였다. 현장조건에 근거하여 11개 구간을 비교에 적합한 구간, 비교에 제약이 있는 구간, 그리고 비교가 곤란한 구간의 세 가지 그룹으로 나누어 조사하였으며 측정된 자료는 통계적으로 분석되었다. 섬유보강 아스팔트 포장은 일반 또는 개질 아스팔트 포장에 비해 러팅 저항성이 크고 종단평탄성이 증진되는 효과가 있었다. 하지만, 처짐은 유사했으며 조사된 구간의 공용기간이 짧아 균열에 대한 저항성은 비교할 수 없었다.

• 대한토목학회논문집
• /
• 제26권2D호
• /
• pp.285-292
• /
• 2006

본 연구에서는 국내에서 개발된 Full-Scale 포장가속시험기(HAPT; Hanyang Accelerated Pavement Tester)를 소개하고, 이 시험의 시험운영과 함께 개질아스팔트 혼합물과 일반 밀입도 아스팔트 혼합물의 소성변형 저항성 비교 연구를 수행하였다. 포장가속시험은 일반 밀입도와 3종의 개질아스팔트 각각에 대해 3가지 온도조건(25-30, 40, $50^{\circ}C$)에서 소성변형 저항성을 평가하였으며, 이 평가 결과들은 DSR실험등 바인더의 실내실험 결과들과도 비교하였다. 포장가속시험을 통한 소성변형 발생량을 분석한 결과, 시험 대상이 된 모든 개질아스팔트 구간에서 일반 밀입도에 비해 소성변형 저항성이 큰 것으로 나타났다. 특히 고온조건에서는 그 차이가 매우 크게 나타났다. 일반 밀입도 아스팔트포장을 대상으로 포장온도 증가에 따른 소성변형 저항성을 분석한 결과 온도가 어느 이상 되면 소성변형 저항성이 급격히 떨어짐을 알 수 있었다. 또한 소성변형에 관련한 중요한 인자로 제시되는 $G^*/sin{\delta}$는 소성변형 저항성을 잘 나타내고 있는 것으로 나타났다. 반면에 회복탄성계수는 소성변형 저항성을 나타내는 인자로 바람직하지 않음도 확인하였다.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.15-20
• /
• 2018

PURPOSES : The purpose of this study is to analyze the magnitude of shoving of asphalt pavement by junction type between airport concrete and asphalt pavements, and to suggest a junction type to reduce shoving. METHODS : The actual pavement junction of a domestic airport, which is called airport "A" was modified by placing the bottom of the buried slab on the top surface of the subbase. A finite element model was developed that simulated three junction types: a standard section of junction proposed by the FAA (Federal Aviation Administration), an actual section of junction from airport "A" and a modified section of junction from airport "A". The vertical displacement of the asphalt surface caused by the horizontal displacement of the concrete pavement was investigated in the three types of junction. RESULTS : A vertical displacement of approximately 13 mm occurred for the FAA standard section under horizontal pushing of 100 mm, and a vertical displacement of approximately 55 mm occurred for the actual section of airport "A" under the same level of pushing. On the other hand, for the modified section from airport "A" a vertical displacement of approximately 17 mm occurred under the same level of pushing, which is slightly larger than the vertical displacement of the FAA standard section. CONCLUSIONS : It was confirmed that shoving of the asphalt pavement at the junction could be reduced by placing the bottom of the buried slab on the top surface of the subbase. It was also determined that the junction type suggested in this study was more advantageous than the FAA standard section because it resists faulting by the buried slab that is connected to the concrete pavement. Faulting of the junctions caused by aircraft loading will be compared by performing finite element analysis in the following study.