• 제목/요약/키워드: modified TANK model

검색결과 63건 처리시간 0.028초

유전자 알고리즘을 이용한 장·단기 유출모형의 매개변수 최적화 (Parameter Optimization of Long and Short Term Runoff Models Using Genetic Algorithm)

  • 김선주;지용근;김필식
    • 한국농공학회논문집
    • /
    • 제46권5호
    • /
    • pp.41-52
    • /
    • 2004
  • In this study, parameters of long and short term runoff model were optimized using genetic algorithm as a basic research for integrated water management in a watershed. In case of Korea where drought and flood occurr frequently, the integrated water management is necessary to minimize possible damage of drought and flood. Modified TANK model was optimized as a long term runoff model and storage-function model was optimized as a short term runoff model. Besides distinguished parameters were applied to modified TANK model for supplementing defect that the model estimates less runoff in the storm period. As a result of application, simulated long and short term runoff results showed 7% and 5% improvement compared with before optimized on the average. In case of modified TANK model using distinguished parameters, the simulated runoff after optimized showed more interrelationship than before optimized. Therefore, modified TANK model can be applied for the long term water balance as an integrated water management in a watershed. In case of storage-function model, simulated runoff in the storm period showed high interrelationship with observed one. These optimized models can be applied for the runoff analysis of watershed.

Tank모형 쉘프로그램을 이용한 중소하천의 일유출량 추정 (A Tank Model Shell Program for Simulating Daily Streamflow from Small Watersheds)

  • 박승우
    • 물과 미래
    • /
    • 제26권3호
    • /
    • pp.47-61
    • /
    • 1993
  • 수정 tank 모형의 입력, 구동, 출력 및 매개변수의 보정을 실시할 수 있는 쉘 프로그램 DSFS를 개발하고, 중소 유역의 일 유출량의 추정에 적용하도록 하였다. 수정 tank 모형은 유역의 일별 증발산 손실을 추정함으로써 유출량을 정의하도록 하였으며, 증발손실량은 배재 증발산량에 토양수분계수 및 토지 이용상태에 따른 월별 작물피복계수를 써서 조정하도록 하였다. 모형의 매개변수를 보정하고, 매개변수와 유역 특성인자와의 관계를 얻었다. 개발된 쉘 프로그램을 미계측유역에 적용하였으며, 일유출량 추정에서 최적화 결과와 유사한 값은 보였으나, 년 유출량은 10% 정도 큰 값은 보였다.

  • PDF

선형계획을 위한 쌍대신경망 (Primal-Dual Neural Network for Linear Programming)

  • 최혁준;장수영
    • 한국경영과학회지
    • /
    • 제17권1호
    • /
    • pp.3-16
    • /
    • 1992
  • We present a modified Tank and Hopfield's neural network model for solving Linear Programming problems. We have found the fact that the Tank and Hopfield's neural circuit for solving Linear Programming problems has some difficulties in guaranteeing convergence, and obtaining both the primal and dual optimum solutions from the output of the circuit. We have identified the exact conditions in which the circuit stops at an interior point of the feasible region, and therefore fails to converge. Also, proper scaling of the problem parameters is required, in order to obtain a feasible solution from the circuit. Even after one was successful in getting a primal optimum solution, the output of the circuit must be processed further to obtain a dual optimum solution. The modified model being proposed in the paper is designed to overcome such difficulties. We describe the modified model and summarize our computational experiment.

  • PDF

TPA 방법을 이용한 연료탱크의 슬로싱 소음에 관한 민감도 해석 (Sensitivity Analysis using TPA for Slosh Noise of Fuel Tank)

  • 차희범;윤성호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.356-360
    • /
    • 2007
  • Fuel sloshing in a vehicle fuel tank generates a reluctant low frequency noise, called slosh noise. To reduce slosh noise, whilst many approaches have used the Computational Fluid Dynamics method to first identify fuel behavior in a fuel tank, this paper applies the Transfer Path Analysis method. It is to find contribution of each transfer path from noise transfer function, vibration transfer function and acceleration. Then the final goal is to attenuate slosh noise by controlling them. To this aim, two types of models are studied. One is the decoupled model in which some of connection points of the fuel tank with the vehicle underbody are separated. The other is the modified model which is created by changing noise transfer function and acceleration from the original model. The analysis and validation test results show that the transfer path analysis can be an approach to enhancing slosh noise.

  • PDF

TPA 방법을 이용한 연료탱크의 슬로싱 소음에 관한 민감도 해석 (Sensitivity Analysis Using TPA for Slosh Noise of Fuel Tank)

  • 차희범;윤성호
    • 한국소음진동공학회논문집
    • /
    • 제17권8호
    • /
    • pp.766-770
    • /
    • 2007
  • Fuel sloshing in a vehicle fuel tank generates a reluctant low frequency noise, called slosh noise. To reduce slosh noise, whilst many approaches have used the Computational Fluid Dynamics method to first identify fuel behavior in a fuel tank, this paper applies the Transfer Path Analysis method. It is to find contribution of each transfer path from noise transfer function, vibration transfer function and acceleration. Then the final goal is to attenuate slosh noise by controlling them. To this aim, two types of models are studied. One is the decoupled model in which some of connection points of the fuel tank with the vehicle underbody are separated. The other is the modified model which is created by changing noise transfer function and acceleration from the original model. The analysis and validation test results show that the transfer path analysis can be an approach to enhancing slosh noise.

수학적 해석 방법에 의한 액체저장탱크의 액동압 거동 해석 (Hydrodynamic Behavior Analysis of Vertical-Cylindrical Liquid-Storge Tanks by Mathematically Analytic Method)

  • 박종률;오택열
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.628-635
    • /
    • 2001
  • Hydrodynamic behavior and response of vertical-cylindrical liquid-storage tank is considered. The equation of the liquid motion is shown by Laplace's differential equation with the fluid velocity potential. The solution of the Laplace's differential equation of the liquid motion is expressed with the modified Bessel functions. Only rigid tank is studied. The effective masses and heights for the tank contents are presented for engineering design model.

  • PDF

KSR-III 추진제 탱크 압력 조절용 레귤레이터 개발 (The Development of Pressure Regulator of Propellant Tank for KSR-III)

  • 정영석;조기주;조인현;김용욱;오승협
    • 한국추진공학회지
    • /
    • 제6권4호
    • /
    • pp.47-58
    • /
    • 2002
  • 압력조절 레귤레이터는 KSR-III 추진제 탱크의 압력 조절용으로 개발하였다. KSR-III 가압 시스템은 가압 탱크, 압력조절용 레귤레이터, 추진제 탱크로 구성된 가장 기본적인 시스템이며 레귤레이터는 헬륨 탱크, 파이로밸브, 헬륨주입밸브와 더불어 가장 핵심적인 부품이다. 1차 시제품으로 기밀, 강도, 기본 성능을 만족하는 상세 설계를 완성하였고 2차 시제품으로 추진기관 종합수류시험을 수행하였다. 2차시험을 통해서 밸브의 용량(Cv)을 늘려야 할 필요성이 나타났다. 3차 시제품에 이를 개선하였으며 추진기관 종합 실추진제 시험과 연소시험을 통해 최종 검증하였다.

강우-유출모형의 매개변수 보정을 위한 최적화 기법의 비교분석 (The Comparative Analysis of Optimization Methods for the Parameter Calibration of Rainfall-Runoff Models)

  • 김선주;지용근;김필식
    • 한국농공학회논문집
    • /
    • 제47권3호
    • /
    • pp.3-13
    • /
    • 2005
  • The conceptual rainfall-runoff models are used to predict complex hydrological effects of a basin. However, to obtain reliable results, there are some difficulties and problems in choosing optimum model, calibrating, and verifying the chosen model suitable for hydrological characteristics of the basin. In this study, Genetic Algorithm and SCE-UA method as global optimization methods were applied to compare the each optimization technique and to analyze the application for the rainfall-runoff models. Modified TANK model that is used to calculate outflow for watershed management and reservoir operation etc. was optimized as a long term rainfall-runoff model. And storage-function model that is used to predict real-time flood using historical data was optimized as a short term rainfall-runoff model. The optimized models were applied to simulate runoff on Pyeongchang-river watershed and Bocheong-stream watershed in 2001 and 2002. In the historical data study, the Genetic Algorithm and the SCE-UA method showed consistently good results considering statistical values compared with observed data.

자연대류형 태양열온수기의 특성별 성능평가에 관한 연구 (Performance Ratings According to Characteristics of Thermosyphon Solar Hot Water System)

  • 강용혁;곽희열;유창균;윤환기;강명철;이동규
    • 태양에너지
    • /
    • 제20권2호
    • /
    • pp.9-17
    • /
    • 2000
  • To obtain thermal performance data, an experiment was performed with the two selected thermosyphon systems. The system parameters obtained by experimental data were used to perform TRNSYS simulation and verified TRNSYS model of thermosyphon solar hot water system. The thermosyphon solar hot water system was TYPE 145 which is modified from non-linear model. This model can describe heat exchange type and non-linear efficiency equation. It is possible to analyze the annual energy rate with efficiency equation and system specification. In this paper, we could compare the annual performance of the coil heat exchanger with that of the tank-in-tank heat exchanger. Under the same efficiency and parameter, heat exchange, drain, initial tank temperature, ratio of tank volume over collector area(V/Ac), regional annual performance rating were performed.

  • PDF

중소유역의 일별 용수수급해석을 위한 하천망모형의 개발(I) - 중소유역의 일유출량 추정 - (A Streamflow Network Model for Daily Water Supply and Demands on Small Watershed (1) -Simulating Daily Streamflow from Small Watersheds-)

  • 허유만;박창헌;박승우
    • 한국농공학회지
    • /
    • 제35권1호
    • /
    • pp.40-49
    • /
    • 1993
  • The Objectives of this paper were to develop a modified tank model that is capable of simulating daily streamflow from a small watershed using daily watershed evapotranspiration and to test the applicability of the model to different watersheds. Tank model was restructured to consist of three series of tanks, each of which may mathematically reflect watershed runoff mechanisms from different components of surface runoff, interflow, and baseflow. And pan evaporation was correlated to potential evapotranspiration estimated from a combination method, and was multiplied by monthly crop and landuse coefficients, and watershed storage coefficient to estimate the watershed evapotranspiration losses. Ten watersheds were selected to calibrate model parameters that were defined using an optimization scheme, and the results were correlated with watershed parameters. Simulated daily runoff was compared to the observed ones from the tested watersheds. The simulating results were in good agreement with the observed values when optimal and calibrated parameters were used. Ungaged conditions were also applied to compare simulated values to the observed. And the results were in fair conditions for all the tested watersheds which differ considerably in their sizes, landuse types, and physiological features.

  • PDF