• 펄프종이기술
• /
• 제42권2호
• /
• pp.95-101
• /
• 2010

For the development of higher-sizing performance of paper, a sizing agent using recycled PET was synthesised. Polyester resin was extracted from wasted PET by subcritical hydrolysis and finally modified to synthetic sizing agent by mixing water-disperse PET with triphenyl phosphite(TPP). The modified PET was considered as an internal sizing agent in different wet-end papermaking conditions. The optimum condition in sizing efficiency was obtained in initial pH of 6.5 in case of rosin+alum system, and 7.5 in case of rosin+alum+PET system, respectively, and in addition amount of PET 3%. The sizing efficiency was also closely related according to the fiber properties of wet-end slurry, such as virgin fibres from UKP and recycled fibres from KOCC. The application of modified PET was good in strength improvement of paper, specially in tensile strength.

• 폴리머
• /
• 제34권5호
• /
• pp.410-414
• /
• 2010

재활용 PET와 fly-ash를 이용하여 두 가지 종류의 고분자 몰타르(PMM)를 제조하였다. 재활용 PET의 조성을 변화시켜 경성(rigid) polymer-modified mortar(PMM)와 연성(flexible) PMM을 제조하였다. 마찰계수 측정을 포함하는 기계적 특성과 흡음 특성을 조사하였고 상업적 PMM인 에폭시 PMM과 PET PMM을 비교하였다. 기계적 특성들의 결과로부터 경성 PMM이 상업적인 PET PMM에 비하여 우수함을 알 수 있었다. 흡음계수 측정에서 경성 PMM과 연성 PMM 모두 상업적인 PMM에 비하여 매우 우수한 흡음 특성을 보여주었다. 또한, 마찰계수 측정결과는 경성 PMM이 바닥재의 활용에 적절하다는 것을 보여주었다.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.27-33
• /
• 2008

Polyethylene terephtahalate has been used in several areas such as fiber, film, bottle, and disposable products. Production of PET has been rapidly increasing these days. Since PET is a semi-permanent material, it has a non-biodegradable character in itself. Wasted PET products can cause serious environmental problems. Many countries around the world impose environmental legal restrictions over their abandonments. Many researches on the enviromental influence factors and treatment techniques of the wasted PET have been carried out. The main objective of this study is to develop a new sizing agent using recycling PET and improve its internal sizing effect. Dried powder of PET was used to make the modified PET. After extracting water-dispersible PET by subcritical hydrolysis, polyester resins have been extracted and triphenyl phosphate(TPP) has been added to obtain optimal internal sizing agent. It was found that the optimum dosage of TPP was 2% (per PET weight) and the hydrolysis temperature was independent on making the modified PET.

• 한국재료학회지
• /
• 제2권2호
• /
• pp.101-109
• /
• 1992

PET(polyethylene terephthalate)는 섬유 및 다방면의 응용분야에 사용되는 상업용 고분자로 알려져 있다. 본 논문에서는 PET를 개질하기 위해 pentanediol의 이성질체인 1,5-pentanediol(1, 5-PD)과 neopentyl glycol(NPG)를 제3 monomer로 도입시켰다. NPG를 도입시킨 경우에는 결정화 속도가 감소하고, 1,5-PD로 개질된 PET는 1,5-PD가 약 10mo1% 첨가될 때가지 결정화 속도가 서서히 증가하였다. 이러한 결과는 NPG의 branch된 methyl기가 고분자 사슬에 표면으로 확산되면서 결정화하는 것을 방해하기 때문이다.

• 한국염색가공학회지
• /
• 제9권2호
• /
• pp.17-24
• /
• 1997

PET/PHE blends were prepared by the mixing of poly(ethylene terephthalate) and poly(hydroxyether of bisphenol A) at melt state above PET melting temperature and modified PET fibers having less than 5 wt% of PHE were also prepared by the melt spinning of the PET/PHE blends. The PET/PHE blends were able to prepare by means of physical mixing concept, except the chemical interaction between hydroxyl groups of PHE and ester groups of PET. It has been revealed that the modified PET fibers have some hydrophilic properties such as low contact angle and easy-dyeable characters.

• 폴리머
• /
• 제24권6호
• /
• pp.810-819
• /
• 2000

Poly(p-hydroxybenzoate) (PHB)/poly(ethylene terephthalate) (PET) 8/2 공중합 폴리에스터 액정고분자와 poly(ethylene 2,6-naphthalate) (PEN), PET를 용융방사하여 인장탄성률을 측정하고, 55$^{\circ}C$ ο-chlorophenol 에서 2시간 동안 모재인 PEN/PET부분을 용출시킨 후, 용출되지 않은 PHB 피브릴을 전자현미경으로 조사하였다. 모재고분자 속에 존재하는 피브릴이 단섬유일 때 적용하는 Halpin-Tsai식과 피브릴이 연속상일 경우 적용하는 혼합의 법칙을 사용하여 이론적인 탄성률을 계산하고, 측정된 탄성률과 비교하였다. 이론적 탄성률과 측정된 탄성률의 차이를 보정하기 위하여 무차원 점도비 상수 (K)를 정의하고, K를 적용하여 기존의 식을 변형하였다. 변형된 Halpin-Tsai식과 혼합의 법칙을 통해 계산된 이론적인 탄성률은 용융방사를 통해 제조된 복합재료의 탄성률 계산에 더 적합함을 확인하였다.

• 한국농공학회논문집
• /
• 제48권1호
• /
• pp.13-23
• /
• 2006

In 1998, Food and Agriculture Organization addressed that FAO Modified Penman method possibly over-estimates consumptive use of water comparing to the measured reference crop evapotranspiration (PET) and Penman-Monteith method can be better choice for accurate PET estimation. Nevertheless it is still difficult to find research efforts about paddy rice crop coefficient for Penman-Monteith method. This study aims to estimate paddy rice crop coefficients for Penman-Monteith and FAO modified Penman methods in the manner of comparing two equations. To estimate the crop coefficients, measured evapotranspiration data during 1982-1986 and 1995-1997 were used. The average Penman-Monteith crop coefficients ranged from 0.78 to 1.58 for translated paddy rice and from 0.87 to 1.74 for flood-direct seeded paddy rice. The average FAO Modified Penman crop coefficients ranged from 0.65 to 1.35 for translated paddy rice and from 0.70 to 1.58 for flood-direct seeded paddy rice.

• 폴리머
• /
• 제37권4호
• /
• pp.500-506
• /
• 2013

비혼화성인 선형의 폴리페닐렌설파이드(PPS)와 상용 폴리에틸렌테레프탈레이트(PET)의 블렌드 물성에 미치는 상용화제의 구조에 따른 영향을 조사하였다. 머독 혼련 스크류가 장착된 단축 압출기를 통하여 제조한 블렌드를 성형하여 그 특성들을 살펴보았다. 물성과 경제성을 고려하여 PPS/PET(40/60)을 기초 블렌드로 선정한 후 여기에 도메인 크기감소와 계면접착력 향상을 위하여 상용화제로 styrene-ethylene/butylene-styrene(SEBS), modified SEBS(m-SEBS), modified polystyrene(m-PS) 등을 사용하였다. 이들을 기초블렌드에 첨가하여 삼원블렌드를 제조한 후 열적, 유변학적, 기계적 특성을 측정하고 모폴로지를 관찰하였다. 기계적 물성은 각각 m-SEBS와 m-PS 첨가량 1 phr 부근에서 최대값을 보였는데 그 값이 이론적인 혼화성계의 값에 거의 근접하였으며 m-PS가 가장 뛰어난 성능을 보였다. m-SEBS와 m-PS는 선형 PPS와/또는 PET와의 부분적인 반응을 통해 상용성을 증대시켜서 더 큰 효과를 보인 것으로 판단된다. 이러한 삼원블렌드는 경제성있는 PPS 알로이로서 적용이 가능하리라 사료된다.

• 공업화학
• /
• 제9권6호
• /
• pp.930-934
• /
• 1998

Dimethyl terephthalate, ethylene glycol, polyethylene glycol 및 계면활성제인 dodecylbenzene sulfonate를 반응시켜 개질시킨 poly(ethylene terephthalate) 중합체를 합성하였다. 이들의 점성도, 색상변화, 접촉각측정법으로 친수성 등을 살펴보았다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권3호
• /
• pp.225-229
• /
• 2021

The digital image such as medical X-ray and nuclear medicine field mainly contains noise distribution. The noise degree in image degrades image quality. That is why, the noise reduction algorithm is efficient for medical image field. In this study, we confirmed effectiveness of application for median modified Wiener filter (MMWF) algorithm for noise reduction in PET/MR image compared with median filter image, which is used as conventional noise redcution algorithm. The Jaszczak PET phantom was used by using 18F solution and filled with NaCl+NiSO4 fluids. In addition, the radioactivity ratio between background and six spheres in the phantom is maintained to 1:8. In order to mimic noise distribution in the image, we applied Gaussian noise using MATLAB software. To evlauate image quality, the contrast to noise ratio (CNR) and coefficient of variation (COV) were used. According to the results, compared with noise image and images with MMWF algorithm, the image with MMWF algorithm is increased approximately 33.2% for CNR result, decreased approximately 79.3% for COV result. In conclusion, we proved usefulness of MMWF algorithm in the PET/MR images.