• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.23-30
• /
• 2008

In this paper, when the silk fabric was modified by ethylene cyanohydrine, the reaction mechanism between both was studied at various treatment conditions such as curing temperatures and times, ethylene cyanohydrin concentrations and $ZnCl_2$ concentrations. Through the FT-IR and DSC analyses of the treated silk fabrics, we found the results as follows : It was observed in FT-IR analysis of the treated silk fabrics that the -OH characteristic peak($3,450cm^{-1}$)position and shape were all changed when drying and curing treatment conditions were at $80^{\circ}C$ for 3 minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the $ZnCl_2$ was 0.1%. It indicated that the -OH group of the silk participated in the reaction between the silk fabric and ethylene cyanohydrin. From the DSC analysis, it was found that the pyrolysis temperatures of the treated silk fabrics by ethylene cyanohydrin which was processed in the same condition, were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$. From the FT-IR analyses of the silk fabrics treated by ethylene cyanohydrin at the various concentrations of $ZnCl_2$, it was found that the -OH characteristic peaks($3,450cm^{-1}$) were similar to the nontreated one except that of the fabric treated at the $ZnCl_2$ conconcentration of 0.8% when drying and curing treatment conditions were at $80^{\circ}C$ for 3minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the ethylene cyanohydrin was 5%. In the case of the $ZnCl_2$ concentration of 0.8% solution, a lot of change were observed in peak. From the DSC analysis of the treated silk fabrics which was processed in the same condition, it was showed that the pyrolysis temperatures of treated silk fabric were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$, which was no relation with the concentration of $ZnCl_2$.

• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.445-456
• /
• 2005

The land surface parameters should be determined with sufficient accuracy, because these play an important role in climate change near the ground. As the surface reflectance presents strong anisotropy, off-nadir viewing results a strong dependency of observations on the Sun - target - sensor geometry. They contribute to the random noise which is produced by surface angular effects. The principal objective of the study is to provide a database of accurate surface reflectance eliminated the angular effects from MODIS 250m reflective channel data over Korea. The MODIS (Moderate Resolution Imaging Spectroradiometer) sensor has provided visible and near infrared channel reflectance at 250m resolution on a daily basis. The successive analytic processing steps were firstly performed on a per-pixel basis to remove cloudy pixels. And for the geometric distortion, the correction process were performed by the nearest neighbor resampling using 2nd-order polynomial obtained from the geolocation information of MODIS Data set. In order to correct the surface anisotropy effects, this paper attempted the semiempirical kernel-driven Bi- directional Reflectance Distribution Function(BRDF) model. The algorithm yields an inversion of the kernel-driven model to the angular components, such as viewing zenith angle, solar zenith angle, viewing azimuth angle, solar azimuth angle from reflectance observed by satellite. First we consider sets of the model observations comprised with a 31-day period to perform the BRDF model. In the next step, Nadir view reflectance normalization is carried out through the modification of the angular components, separated by BRDF model for each spectral band and each pixel. Modeled reflectance values show a good agreement with measured reflectance values and their RMSE(Root Mean Square Error) was totally about 0.01(maximum=0.03). Finally, we provide a normalized surface reflectance database consisted of 36 images for 2001 over Korea.

• (The) Research of the performance art and culture
• /
• no.32
• /
• pp.399-426
• /
• 2016

Sanjo has a quintessential value not only because of its musical depth but also because of its style of music that best expresses Korean sentiment. However, new values are being established from different viewpoints as time passes so Sanjo's values need a modification in order to encompass a contemporary value that is required and accepted by modern society. In this context, while focusing on communication with the public, I contemplated the developmental direction of Sanjo in five perspectives; The Social realization of value, The Experimental and social transformation, The Social diffusion of creation, The Leap of fusion and harmony and finally The Socialization of contents. In the perspective of 'social realization of value', Sanjo refers to creative activity as a new 'duneum' which allows traditional and creative activity to deviate freely while still being under the Sanjo guideline. Either way, it has a periodical value because new forms with new rhythms are the only ways to communicate with the modern public. When these values can be understood by modern society can Sanjo be revived and be acknowledged as an infinite value. Secondly as an experiment and social transformation, there is a transformation of musical instruments in the 21th century. Our musical instruments should be transformed to effectively perform our music rather than to perform Western music. Third, social diffusion of creation should be the 'new Sanjo festival in 21th century' which can facilitate the communication with the public. Fourth, regarding leap of fusion and harmony, I suggest a performing culture consisting of 'Storytelling Sanjo' and 'Media Art' which will ceaselessly evolve Sanjo performance as a medium to communicate with the public. Finally, in regards to the socialization of contents, I emphasize that Sanjo should have contents of mass media as a way of means to help utilize mass media.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.60-61
• /
• 2003

A new approach to reduce the computation time of genetic algorithm (GA) for making binary phase holograms is described. Synthesized holograms having diffraction efficiency of 75.8% and uniformity of 5.8% are proven in computer simulation and experimentally demonstrated. Recently, computer-generated holograms (CGHs) having high diffraction efficiency and flexibility of design have been widely developed in many applications such as optical information processing, optical computing, optical interconnection, etc. Among proposed optimization methods, GA has become popular due to its capability of reaching nearly global. However, there exits a drawback to consider when we use the genetic algorithm. It is the large amount of computation time to construct desired holograms. One of the major reasons that the GA' s operation may be time intensive results from the expense of computing the cost function that must Fourier transform the parameters encoded on the hologram into the fitness value. In trying to remedy this drawback, Artificial Neural Network (ANN) has been put forward, allowing CGHs to be created easily and quickly (1), but the quality of reconstructed images is not high enough to use in applications of high preciseness. For that, we are in attempt to find a new approach of combiningthe good properties and performance of both the GA and ANN to make CGHs of high diffraction efficiency in a short time. The optimization of CGH using the genetic algorithm is merely a process of iteration, including selection, crossover, and mutation operators [2]. It is worth noting that the evaluation of the cost function with the aim of selecting better holograms plays an important role in the implementation of the GA. However, this evaluation process wastes much time for Fourier transforming the encoded parameters on the hologram into the value to be solved. Depending on the speed of computer, this process can even last up to ten minutes. It will be more effective if instead of merely generating random holograms in the initial process, a set of approximately desired holograms is employed. By doing so, the initial population will contain less trial holograms equivalent to the reduction of the computation time of GA's. Accordingly, a hybrid algorithm that utilizes a trained neural network to initiate the GA's procedure is proposed. Consequently, the initial population contains less random holograms and is compensated by approximately desired holograms. Figure 1 is the flowchart of the hybrid algorithm in comparison with the classical GA. The procedure of synthesizing a hologram on computer is divided into two steps. First the simulation of holograms based on ANN method [1] to acquire approximately desired holograms is carried. With a teaching data set of 9 characters obtained from the classical GA, the number of layer is 3, the number of hidden node is 100, learning rate is 0.3, and momentum is 0.5, the artificial neural network trained enables us to attain the approximately desired holograms, which are fairly good agreement with what we suggested in the theory. The second step, effect of several parameters on the operation of the hybrid algorithm is investigated. In principle, the operation of the hybrid algorithm and GA are the same except the modification of the initial step. Hence, the verified results in Ref [2] of the parameters such as the probability of crossover and mutation, the tournament size, and the crossover block size are remained unchanged, beside of the reduced population size. The reconstructed image of 76.4% diffraction efficiency and 5.4% uniformity is achieved when the population size is 30, the iteration number is 2000, the probability of crossover is 0.75, and the probability of mutation is 0.001. A comparison between the hybrid algorithm and GA in term of diffraction efficiency and computation time is also evaluated as shown in Fig. 2. With a 66.7% reduction in computation time and a 2% increase in diffraction efficiency compared to the GA method, the hybrid algorithm demonstrates its efficient performance. In the optical experiment, the phase holograms were displayed on a programmable phase modulator (model XGA). Figures 3 are pictures of diffracted patterns of the letter "0" from the holograms generated using the hybrid algorithm. Diffraction efficiency of 75.8% and uniformity of 5.8% are measured. We see that the simulation and experiment results are fairly good agreement with each other. In this paper, Genetic Algorithm and Neural Network have been successfully combined in designing CGHs. This method gives a significant reduction in computation time compared to the GA method while still allowing holograms of high diffraction efficiency and uniformity to be achieved. This work was supported by No.mOl-2001-000-00324-0 (2002)) from the Korea Science & Engineering Foundation.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.224-231
• /
• 2005

In geophysical field surveys, commercial equipments often fail to resolve the subsurface target or even sometimes fail to be applied because they do not fit to the various field situations or the physical properties of the medium or target. We developed a geophysical measurement system, which can be easily adapted for the various field situations and targets. The system based on PXI with A/D converter and some stand alone equipment such as Network Analyzer was applied to borehole radar survey, borehole sonic measurement and electromagnetic noise measurement. The system for borehole radar survey consists of PXI, Network Analyzer, dipole antennas, GPIB interface is used for PXI to control Network Analyzer. The system for borehole sonic measurement consists of PXI, 24 Bit A/D converter, high voltage pulse generator, transmitting and receiving piezoelectric sensors. The electromagnetic noise measurement system consists of PXI, 24 Bit A/D converter, 2 horizontal component electric field sensors and 2 horizontal and 1 vertical component magnetic filed sensors. The borehole radar system has been successfully applied to detect the width of the artificial tunnel through which the borehole pass and to image buried steel pipe, while the commercial borehole radar equipment failed. The borehole sonic system was tested to detect the width of artificial tunnel and showed a reasonable result. The characteristic of electromagnetic noise was grasped at an urban area with the data from the electromagnetic noise measurement system. The system is also applied to characterize the signal distortion by induction between the electric cables in resistivity survey. The system can be applied various geophysical problems with a simple modification of the system and sensors.

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.203-212
• /
• 2017

A scientific model refers to a conceptual system that can describe, explain, and predict a particular physical phenomenon. The co-construction of the scientific model is attracting attention as a new teaching and learning strategy in the field of science education and various studies. The evaluation and modification of models compared with the predicted models of data from the real world is the core of modeling strategy. However, there were only a limited data provided by the teacher in many studies of modeling comparing the students' predictions of their own models. Most of the students were not given the opportunity to evaluate the suitability of the model with the data in the real world. The purpose of this study was to develop a scientific model co-construction program that can evaluate the model by directly comparing the predicted models with the observed data from the real world. Through a collaborative discussion between teachers and researchers for 6 months, a 5-session scientific model co-construction program on the subject 'image formation by convex lenses' for second grade middle school students was developed. Eighty (80) students in 3 classes and a science teacher with 20 years of service from general public co-educational middle school in Gyeonggi-do participated in this 2-week program. After the class, students were asked about the helpfulness and difficulty of the class, and whether they would like to recommend this class to a friend. After the class, 95.8% of the students constructed the scientific model more than the model using the construction rule. Students had difficulties to identify principles or understand their friends, but the result showed that they could understand through model evaluation experiment. 92.5% of the students said that they would be more than willing to recommend this program to their friends. It is expected that the developed program will be applied to the school and contribute to the improvement of students' modeling ability and co-construction ability.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.157-161
• /
• 2011

Although many researches have been carried out concerning the watershed division in natural areas, it has not been researched for the urban watershed division. If the boundary between two urban areas is indistinct because no natural distinction or no administrative division is between the areas, the boundary between the urban areas that have the different outlets (multi-outlet urban watershed) is determined by only designer of sewer system. The suggested urban watershed division model (UWDM) determines the watershed boundary to reduce simultaneously the peak outflows at the outlets of each watershed. Then, the UWDM determines the sewer network to reduce the peak outflow at outlet by determining the pipe connecting directions between the manholes that have the multi-possible pipe connecting directions. In the UWDM, because the modification of the sewer network changes the superposition effect of the runoff hydrographs in sewer pipes, the optimal sewer layout can reduce the peak outflow at outlet, as much as the superposition effects of the hydrographs are reduced. Therefore, the UWDM can optimize the watershed distinction in multi-outlet urban watershed by determining the connecting directions of the boundary-manholes using the genetic algorithm. The suggested model was applied to a multi-outlet urban watershed of 50.3ha, Seoul, Korea, and the watershed division of this model, the peak outflows at two outlets were decreased by approximately 15% for the design rainfall.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.1
• /
• pp.24-43
• /
• 2015

This study constitutes an inquiry into the decline of Government Office(官衙) facilities carried out intensively during modern era, focusing on provincial government offices of Jeollabuk-do. There have been several studies of changes in provincial government offices till now, but there have been few studies of government offices of the counties and prefectures(郡縣) during the period of the Japanese Resident-General of Korea and after the National Liberation, temporally and there have still been lacking studies on Jeollabuk-do, spatially. Thus, this study attempts to empirically prove the reasons and the time of the decline of provincial government offices in Jeollabuk-do and the characteristics in the process of decline focusing on modern era. As a result of the study, four factors: demolition, abolition, appropriation and disaster had the most decisive impacts on the decline of government office facilities. Demolition refers to the destruction of government office facilities, and abolition, to the decline and the discontinuation of the operation of the facilities. Appropriation refers to conversion to facilities to meet public functions, and disaster, damage from a typhoon or fire. These factors had already been started from the 1900s, and by the 1930s, most of the government office facilities came to lose their original looks and functions. In the meantime, there was an essential purpose in demolition, the most direct factor in the destruction of the government office facilities in terms of function: that is new construction of public facilities necessary for administration and rule. The existing government office facilities were appropriated, sometimes, but behind that, many cases of demolition of the government office facilities for the new construction of public facilities are found. The appropriation of the government office facilities is divided into educational, administrative, financial and security facilities, and generally, Gaeksa(客舍) and Dongheon(東軒) were used respectively as educational and administrative facilities while their attached facilities were used as financial and public order and security facilities in general. Especially, some government office facilities were utilized as distinctive facilities such as housing or hospital. In the process of appropriation, a lot of modification occurred inside and outside the government office facilities, due to which, the government office facilities gradually declined losing their traditional styles.

• Journal of Nutrition and Health
• /
• v.52 no.4
• /
• pp.332-341
• /
• 2019

Purpose: Poor nutrition in hospitalized patients is closely linked to an increased risk of infection, which can result in complications affecting mortality, as well as increased length of hospital stay and hospital costs. Therefore, adequate nutritional support is essential to manage the nutritional risk status of patients. Nutritional support needs to be preceded by nutrition screening, in which accuracy is crucial, particularly for the initial screening. To perform initial nutrition screening of hospitalized patients, we used the Catholic Kwandong University (CKU) Nutritional Risk Screening (CKUNRS) tool, originally developed at CKU Hospital. To validate CKUNRS against the Patient-Generated Subjective Global Assessment (PG-SGA) tool, which is considered the gold standard for nutritional risk screening, results from both tools were compared. Methods: Nutritional status was evaluated in 686 adult patients admitted to CKU Hospital from May 1 to July 31, 2018 using both CKUNRS and PG-SGA. Collected data were analyzed, and the results compared, to validate CKUNRS as a nutrition screening tool. Results: The comparison of CKUNRS and PG-SGA revealed that the prevalence of nutritional risk on admission was 15.6% (n = 107) with CKUNRS and 44.6% (n = 306) with PG-SGA. The sensitivity and specificity of CKUNRS to evaluate nutritional risk status were 98.7% (96.8 ~ 99.5) and 33.3% (28.1 ~ 39.0), respectively. Thus, the sensitivity was higher, but the specificity lower compared with PG-SGA. Cohen's kappa coefficient was 0.34, indicating valid agreement between the two tools. Conclusion: This study found concordance between CKUNRS and PG-SGA. However, the prevalence of nutritional risk in hospitalized patients was higher when determined by CKUNRS, compared with that by PG-SGA. Accordingly, CKUNRS needs further modification and improvement in terms of screening criteria to promote more effective nutritional support for patients who have been admitted for inpatient care.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.685-694
• /
• 2018

We measured ecological niche space (ENS) using carbon and nitrogen stable isotope ratios of benthic macroinvertebrates to estimate its applicability for large river assessment. In particular, we compared ENSs of selected macroinvertebrates between upper and lower area of Seungchon Weir in Yeongsan River to estimate the impact of weir on biological community. We also measured basic water quality and community indices including benthic macroinvertebrates index (BMI) to estimate their correlations with calculated ENS. ENS was calculated using the Bayesian Stable Isotope in R statistics (package "SIBER"). The results showed that seasonal variations in water quality and community indices were found, but there was no apparent tendency between upper and lower area of the Seungchon Weir in June (before rainy season) and August (after rainy season). However, ENS of benthic macroinvertebrates markedly decreased across the weir in both June and August regardless of changes in water quality. This means the physical change of the stream due to the weir cause decrease of ecological isotopic niche space of benthic macroinvertebrates regardless of water quality, suggesting physical modification by the weir can affect the interaction between habitat condition and macroinvertebrates. Therefore, the ecological isotopic niche space can be a useful supplementary indicator for the river ecosystem assessment.