• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.111-119
• /
• 1998

This paper reports a part of research work on earthquake resistance consideration in regions of moderate seismicity, which is being carried out in the Department of Civil Engineering, Hong Kong University of Science & Technology. The possible seismic hazard in Hong Kong, which is located in a region of moderate seismicity, is described. A case study is presented to compare the wind and earthquake effects on Hong Kong buildings and to assess whether seismic analysis and desing is necessary for building structure. Potential problems of reinforced concrete buildings under earthquake effects in regions of moderate seismicity are discussed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.741-748
• /
• 2006

Seismic performance evaluation was conducted for four wind-designed concentrically braced steel highrise buildings in order to check the feasibility of designing steel highrise buildings per elastic seismic design criterion (or strength and stiffness solution) in the regions of strong wind and moderate seismicity. The pushover analysis results revealed that the wind-designed highrise buildings possess significantly increased elastic seismic capacity due to the overstrength resulting from the wind serviceability criterion. The strength demand-to-capacity study showed that, due to the wind-induced overstrength, highrise buildings with a slenderness ratio of larger than four or five can withstand elastically even the maximum considered earthquake at the performance level of immediate occupancy. Based on the analytical results of this study, practical elastic seismic design procedure for steel highrise buildings in the regions of moderate seismicity is proposed.

• Earthquakes and Structures
• /
• 제4권6호
• /
• pp.629-647
• /
• 2013

Loading protocols have been developed for quasi-static cyclic testing of structures and components. However, it is uncertain if protocols developed for conditions of intense ground shaking in regions of high seismicity would also be applicable to regions of low-moderate seismicity that are remote from the tectonic plate boundaries. This study presents a methodology for developing a quasi-static cyclic displacement loading protocol for experimental bracing evaluation of cold-formed steel stud shear walls. Simulations presented in the paper were based on conditions of moderate ground shaking (in Australia). The methodologies presented are generic in nature and can be applied to other regions of similar seismicity conditions (which include many parts of China, Korea, India and Malaysia). Numerous response time histories including both linear and nonlinear analyses have been generated for selected earthquake scenarios and site classes. Rain-flow cycle counting method has been used for determining the number of cycles at various ranges of normalized displacement amplitude. It is found that the number of displacement cycles of the loading protocol increases with increasing intensity of ground shaking (associated with a longer return period).

• Steel and Composite Structures
• /
• 제14권2호
• /
• pp.155-171
• /
• 2013

This study analytically evaluated the seismic performance of wind-designed diagrid tall steel buildings in regions of moderate/low seismicity and strong winds. To this end, diagrid tall steel buildings with varying wind exposure and slenderness ratio (building height-to-width ratio) conditions were designed to satisfy the wind serviceability criteria specified in the Korean Building Code and the National Building Code of Canada. A series of seismic analyses were then performed for earthquakes having 43- and 2475- year return periods utilizing the design guidelines of tall buildings. The analyses demonstrated the good seismic performance of these wind-designed diagrid tall steel buildings, which arises because significant overstrength of the diagrid system occurs in the wind design procedure. Also, analysis showed that the elastic seismic design process of diagrid tall steel buildings might be accepted based on some wind exposures and slenderness ratios.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.101-104
• /
• 2005

This study is to develop detailing guidelines based on ductility demand for reinforced concrete bridge columns in areas of low to moderate seismicity. The current seismic design criteria of the Korea Design Specifications for Highway Bridge (KDSHB 2005) adopted the seismic design concept and requirements of the AASHTO specifications. In order to obtain full ductile behavior under seismic loads, i.e. when applied seismic force is larger than design flexural strength of column section, a response modification factor (R=3 or 5) is used. In moderate seismicity regions, however, adopting the full ductility design concept sometimes results in construction problems due to reinforcement congestion. The objective of this paper is to suggest a new simplified seismic design of reinforced concrete bridge columns for moderate seismicity regions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권5호
• /
• pp.13-20
• /
• 2013

구조물의 지진응답을 저감시키기 위하여 추가적인 감쇠기나 진동제어장치가 일반적으로 사용된다. 이때, 추가적인 감쇠장치의 제어성능은 대상구조물 특성의 변화 없이 검토된다. 본 연구에서는 구조물과 스마트 제어장치의 다목적 통합최적화를 수행하였고 스마트 최상층 면진시스템이 설치된 구조물의 구조물량 저감의 가능성을 분석하였다. 이를 위하여 20층 예제구조물이 사용되었으며 MR 감쇠기와 저감쇠 탄성베어링을 사용하여 스마트 면진시스템을 구성하였다. 중약진지역의 설계스펙트럼을 바탕으로 생성된 인공지진하중을 사용하여 구조해석을 수행하였다. 수치해석결과, 스마트 최상층 면진시스템이 중약진지역에 있는 구조물의 응답과 면진층 변위를 동시에 효과적으로 줄일 수 있는 것을 확인하였다. 본 연구에서 제안된 통합최적설계기법으로 구조물량 및 감쇠기 용량을 적절하게 줄이면서도 우수한 제어성능을 발휘하는 다양한 설계 대안을 제공할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.135-140
• /
• 2002

Bridge columns in strong earthquake area are to be designed and constructed so that enough ductility should be guaranteed. Therefore, large amount of transverse reinforcement is required to confine core concrete of the bridge column by design specifications. In moderate seismicity regions, however, adopting the full ductility design concept sometimes results in construction problems due to reinforcement congestion. For the moderate seismicity regions, a design based on required ductility and required transverse reinforcement might be a reasonable approach. Ductility demand design or performance-based design might be an appropriate approach especially for regions of moderate seismic risk. The procedure and application of this design approach are presented in this paper.

• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.559-578
• /
• 2011

In regions of high seismic risk, high-strength concrete (HSC) columns of tall buildings are designed to be fully ductile during earthquake attack by providing substantial amount of confining steel within the critical region. However. in areas of low to moderate seismic risk, the same provision of confining steel is too conservative because of the reduced seismic demand. More critically, it causes problematic steel congestion in the beam-column joints and column critical region. This will eventually affect the quality of concrete placing owing to blockage. To relieve the problem, the confining steel in the critical region of HSC columns located in low to moderate seismicity regions can be suitably reduced, while maintaining a limited ductility level. Despite the advantage, there are still no guidelines developed for designing limited ductility HSC columns. In this paper, a formula for designing limited ductility HSC columns is presented. The validity of the formula was verified by testing half-scale HSC columns subjected to combined high-axial load and flexure, in which the confining steel was provided as per the proposed formula. From the test results, it is evident that the curvature ductility factors obtained for all these columns were about 10, which is the generally accepted level of limited ductility.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.155-162
• /
• 2002

A technique for the seismic reliability evaluation of electric power transmission systems(EPTS) adapted to ground motion characteristics of Korea has been developed to evaluate reliability indices corresponding to the whole system and to each node within. A network model with nodes and links for EPTS has been established, and a seismic substation-fragility curve obtained from seismic fragilities of power system facilities has been derived. A point source model, the doubly truncated Gutenberg-Richter relationship, and earthquake intensity attenuation formula have been applied to simulate seismic events. Using Monte-Carlo simulation method, the seismic reliability of EPTS is evaluated and, it appeared that seismic effect on EPTS in low and moderate seismicity regions has to be considered.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.553-562
• /
• 2006

바람과 지진에 의한 횡력은 고층건물의 설계에 영향을 미치는 주요하중이다. 본 연구에서는 중/약진대로 분류되지만 강한 태풍이 내습하는 국내의 횡하중 환경하에서 철골조 초고층건물의 내진설계의 핵심문제를 취급하고자 하였다. 즉 연성이 아니라 강성과 강도에 의한 탄성 내진설계의 가능성을 타진하기 위해, 내풍설계된 철골조 초고층 중심가새골조의 푸쉬오버해석, 동적 지진응답해석 및 내진성능평가를 수행하였다. 내풍설계에서 요구되는 사용성 요건을 만족시키면 상당한 크기의 시스템 초과강도가 유입됨을 내풍설계의 분석 및 푸시오버해석을 통하여 확인할 수 있었다. 결과적으로 양질로 내풍설계된 세장비 5이상의 철골조 초고층 중심가새골조는 2400년 재래기의 최대고려지진에 대해서도 즉시입주 가능한 거동수준에서 탄성적으로 저항할 수 있음이 확인되었다. 본 연구의 결과를 종합하여 실무설계에서 활용될 수 있는 풍진대에서의 철골조 초고층건물의 탄성내진설계절차 및 관련 권장사항을 제안하였다.