• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.167-175
• /
• 1992

This paper reports the application study of the bedding reinforcement under a buried pipeline subjected to differential settlement. Three different field conditions have been considered and evaluated via a finite element modeling. The deformation of a buried pepeline has been evaluated for each boundary condition together with the settlement restraining effects of the bedding reinforcement. A guideline of the bedding reinforcement design has been proposed so as to put it to practical use for general field applications. The design guideline incorporates the procedure and method for the selection of typical sections suggested by conventional empirical approach and for the determination of bedding thickness based on the numberical analysis results performed in this research.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.161-172
• /
• 2006

This study aims to compare and contrast the Kansei modeling methods for building a luxuriousness model that people feel about appearance of mobile phones. For the evaluation based on Kansei engineering approaches, 15 participants were employed to evaluate 18 mobile phones using a questionnaire. The results of evaluation were analyzed to build luxuriousness models through quantification I method, neural network, and decision tree method, respectively. The performance of Kansei modeling methods was compared and contrasted in terms of accuracy and predictability. The result of comparison of modeling methods indicated that model accuracy and predictability was closely related to the number of variables and data size. It was also revealed that quantification I method was the best in terms of model accuracy while decision tree method was the best modeling method with small variance in terms of predictability. However, it was empirically found that quantification I method showed extremely unstable predictability with small number of data. Consequently, it is expected that the research findings of this study might be utilized as a guideline for selecting proper Kansei modeling method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1593-1600
• /
• 1999

This paper describes the acquisition modeling of an airborne target for target tracking simulation of infrared homing missiles. The modeling, of which key technologies are the sub-modeling for target infrared signature, atmospheric transmission, and receiver characteristics, shows the acquisition process of an airborne target under various tracking conditions determined by line-of-sight, distance, and atmospheric conditions. We confirm the validity of the modeling by applying it to simulations concerned with target tracking. The modeling gives a guideline to determine an optimum detector and a defection band for effective discrimination of the target among false targets.

• Structural Engineering and Mechanics
• /
• v.18 no.5
• /
• pp.691-707
• /
• 2004

This paper presents the micro-mechanical modeling for predicting concrete behavior under compressive loading. The model is able to represent the heterogeneities in the microstructure up to three phases, i.e., aggregate particles, matrix and interfaces. The smeared crack concept based on non-linear fracture mechanics is implemented in order to formulate the constitutive relation for each component. The splitting tensile strength is considered as a fracture criterion for cracking in micro-level. The finite element method is employed to simulate the model based on plane stress condition by using quadratic triangular elements. The validation of the model is verified by comparing with the experimental results. The influence of tensile strength from both aggregate and matrix phases on the concrete compressive strength is demonstrated. In addition, a guideline on selecting appropriate tensile strength for each phase to obtain specified concrete compressive strength is also presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5716-5720
• /
• 2012

To expand the use of three dimensional(3D) product modelling in the army, we have analyzed military technical data management system, as well as the military guidelines for the unique format and content of technical data package. Because traditional munition sector is based on the machinery and equipment industry, they have usually applied two dimensional(2D) drawings to prepare a design and to make a product. For that reason, there is no provision for 3D product modelling as a technical data package in the military guideline. In this study, we proposed an improvement scheme for the vitalization of 3D product modelling in the army not only in terms of related guideline but also military technical data management system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1676-1681
• /
• 2003

The attachment of mobile vehicle is necessary for the automated operation on the inclined or vertical walls of steel structures. Since the vehicle requires attaching devices additionally, its overall efficiency can be reduced by the devices. Therefore, external shapes of mobile vehicles have to be researched to give the effective movement on the vertical face. For the design of mobile vehicle, the guideline has been derived from the modeling of wall-climbing, so that the vehicle should have a specific external shape for vertical movement due to the gravitational force. Hence, some adequate arrangement of attaching device to the mobile vehicle has been presented for the effective movement. In the experiments with four permanent magnetic wheels, a plausible result was achieved as a vertical attaching force of 185.2(N), a friction force of 153.8(N) and a curvature radius of 1.4m. The mobile vehicle should be modified according to the proposed design guideline. and then it could be applied to a specific operation as an appropriate external shape. Also, Further research is recommended on an optimal posture and a moving method in a specific application. as the attaching force ortho vehicle can be affected by its posture.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.10
• /
• pp.27-35
• /
• 2018

In this paper, a fundamental study for developing and introducing a new assessment method of the 'Energy Performance' in G-SEED that uses dynamic building energy simulations was conducted by comparing and analyzing the corresponding issues of domestic and foreign green building certification systems. The most significant part of the new assessment method to be developed was a development of a modeling guideline for a reference building using dynamic building energy simulations. In this paper, the composition and detailed contents of the guideline was created to comply with domestic energy codes. In addition, one of the most influential part of the result in the simulations, the 24-hour building operation schedule for a reference building, was created considering the equity with the ECO2 program that is the evaluation tool of one of the current assessment methods in the "Energy Performance". In order to improve the completeness of this guideline, it is necessary to continue the process of supplementation in the future, however, this paper is expected to be of great significance as the beginning of the research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.23-30
• /
• 2017

In the AEC(Architecture, Engineering and Construction) industry, BIM(Building Information Modeling) technology not only helps design intent efficiently, but also realizes an object-oriented design including building's life cycle information. Thus it can manage all data created in each building stage and the roles of BIM are greatly expanded. Contractors and designers have been trying to adopt BIM to design competitions and validate it for the best result in various aspects. Via the computational simulation which differs from the existing process, effective evaluation can be done. For this process, a modeling guideline for each kind of BIM tool and a validation system for the confidential assessment are required. This paper explains a new process about design evaluation methods and process using BIM technologies which follow the new paradigm in construction industry through complement points by an example of a competition activity of the Korea Power Exchange(KPX) headquarter office. In conclusion, this paper provides a basic data input guideline based on open BIM for automatic assessment and interoperability between different BIM systems and suggests a practical usage of the rule-based Model Checker.

• Journal of KIISE:Software and Applications
• /
• v.34 no.8
• /
• pp.721-730
• /
• 2007

UML (Unified Modeling Language) is widely used to analyze and design target software. Developers also implement the target software based on the UML artifacts. However, it is difficult to validate whether the artifacts are generated to correspond to the modeling guidelines because the guidelines for UML modeling are described in natural language. This paper discusses rule based model checker focused on whether models are designed according to modeling methodology. We propose rules and their own checker, named GARDIAN, for UML model validation. The checkers are designed for COMET method for the real-time embedded system. We illustrate our checkers using Intelligent Robot system to validate our approach.

• International Journal of Quality Innovation
• /
• v.9 no.3
• /
• pp.145-162
• /
• 2008

Since the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China published the GB/T19580-2004: Criteria for Excellence Performance of China, many enterprises in China have adopted the Criteria to enhance their organization business management and to assess or self-assess organization performance. On the bases of both the Criteria for Excellence Performance of China and the survey data from China Association for Quality (CAQ), this paper systematically explores the relationships among 'leadership', 'strategy planning', 'customer and market', 'information, analysis and improvement', 'resources management', 'process management', and 'performance results' by using structural equations modeling and validates some of the anecdotal beliefs in quality management. This quantitative analysis provides a guideline for organizations in China to identify causal linkage among core value of total quality management and to identify strengths, deficiency, and opportunities to enhance competitive advantages and ensure the future business success.