• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.33-38
• /
• 2012

EMB is considered as the next generation braking mechanism because it has simple structure and is environment friendly. However, as other brake mechanisms, EMB should be operated reliably for any operating conditions. EMB should be designed with fail-safe and fault-tolerant control concepts which require robust fault detection algorithms for various possible faults. In the design of fault detection algorithms, it is very difficult to construct faulty conditions in real EMB and thus, simulations are often used to emulate the faulty conditions. In this paper, a simulation tool is developed using the commercial software to emulate gear faults in the EMB mechanism. A backlash compensation algorithm is introduced based on contact point detection because screw backlash causes a delay in clamping force response time.

• 디지털콘텐츠학회 논문지
• /
• 제6권1호
• /
• pp.85-88
• /
• 2005

분산 멀티미디어 응용에 대한 요구는 정교한 QoS 관리를 위해서 필요하다. 분산 멀티미디어 시스템 견지에서 보면, QoS의 가장 중요한 범주는 시간성, 볼륨, 신뢰성이다. 본 논문에서는 결함 허용을 통해서 신뢰성을 향상시키는 방법에 대해서 기술한다. ERA는 분산 멀티미디어에서 하나의 소프트웨어 오류를 자동적으로 복구할 수 있는 시스템이다. 본 논문은 규칙-기반 DEVS 모델링과 시뮬레이션 기법을 사용하면서 분산 멀티미디어 상에서의 오류 복구 시스템의 성능 분석을 설명한다. DEVS에서 하나의 시스템은 시간 입력, 상태, 출력 및 함수들을 가지고 있다.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.472-481
• /
• 2006

In the conventional SRM with multi-rotor teeth, the air gap must be very small in order to drive the SRM in the saturation region that is necessary for high output torque. However, this leads to the problem of overheating; particularly in the case of a small-size SRM This paper discusses the design of a new type of SRM, namely the rolled rotor SRM. This new type does not require more than a single region of a very small airgap. This solves the overheating problem in the small size SRM. Moreover, the use of the rolled rotor, instead of the conventional toothed rotor, grades the airgap region in a fashion that gives a smooth variation in the reluctance and smooth shapes of both current and torque. The latter functional behavior is required in many applications such as servo applications. The paper first addresses general design steps of the rolled rotor SRM then proceeds to the simulation results of the new SRM in order to evaluate the advantages gained from the new design. In addition, this paper compares the torque ripples obtained from the new design to its equivalent conventional one.

• 국제초고층학회논문집
• /
• 제2권2호
• /
• pp.97-104
• /
• 2013

Recently, the demand for Building Information Modeling (BIM) construction drawings and specifications has increased rapidly. Many countries have also started to implement BIM. The BIM implementation can change the design flow of buildings including high-rise buildings. Against this background, many companies are focusing on the development of BIM software. BIM involves a three-dimensional CAD program that can examine the placement of ductwork and machinery. It significantly increases the efficiency of a mechanical design through data unification using standard Industry Foundation Classes (IFC). In addition, BIM functions as a database to simplify the use of simulation technology for designing air-conditioning systems. To further develop BIM, it is important to know the expectations of mechanical engineers who will become frequent users of BIM in the future. A survey was conducted among Japanese mechanical engineers using a questionnaire to analyze the expectations of mechanical design using BIM. The results show that many respondents strongly recognize BIM as a three-dimensional CAD program. However they also expect that BIM can help the optimization of their design works and enhance design functionality by running simulations utilizing BIM.

• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.555-562
• /
• 2006

최근 액체크로마토그래피는 의학상이나 천연물질 분리에 많이 사용되고 있다. 특히 혼합물에서 유용성분을 분취하기 위해서는 우선 분석용 크로마토그래피의 조업조건이 결정되어야 한다. 때문에 정확한 수학적 모델링과 시뮬레이션은 크로마토그래피의 발전과 디자인 과정에서 필요한 부분이다. 인하대학교 고 순도분리연구실에서는 크로마토그래피의 최적화를 목적으로 HCI 프로그램을 개발하였다. 이 과정에서 최소한의 실험으로 보다 정확하고 빠른 최적 조업조건을 HCI 프로그램을 이용하여 구할 수 있다. 즉 이론단수를 이용하여 체류인자를 예측하는 세가지 모델식으로부터 용출곡선을 계산할 수 있으며 분리도와 분리시간을 기준으로 최적 이동상의 조건을 계산할 수 있다.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.138-145
• /
• 2009

Custom medical treatment is being widely adapted to lots of medical applications. A technology for 3D modeling is strongly required to fabricate medical implants for individual patient. Needs on true 3D CAD data of a patient is strongly required for tissue engineering and human body simulations. Medical imaging devices show human inner section and 3D volume rendering images of human organs. CT or MRI is one of the popular imaging devices for that use. However, those image data is not sufficient to use for medical fabrication or simulation. This paper mainly deals how to generate 3D geometry data from those medical images. A new image processing technology is introduced to reconstruct 3D geometry of a human body vacancy from the medical images. Then a surface geometry data is reconstructed by using Marching cube algorithm. Resulting CAD data is a custom 3D geometry data of human vacancy. This paper introduces a novel 3D reconstruction process and shows some typical examples with implemented software.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.985-993
• /
• 2008

This paper proposes a new DFIG(Doubly-Fed Induction Generator) system using matrix converter, which is very effectively used for interconnecting the wind power system to the power grid. The operation of proposed system was verified by computer simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was conformed by experimental works with a laboratory scaled-model of wind power system. The laboratory scaled-model was built using a motor-generator set with vector drive system, and a matrix converter with DSP(Digital Signal Processor). The operation of scaled-model was tested by modeling the specific variable-speed wind turbine using the real wind data in order to make the scaled-model simulate the real wind power system as close as possible. The simulation and experimental results confirm that matrix converter can be applied for the DFIG system.

• 디지털콘텐츠학회 논문지
• /
• 제9권4호
• /
• pp.785-790
• /
• 2008

디지털 캐로절은 사용자들에게 미디어 동기화 메카니즘을 통하여 미디어 객체 공유를 가능하게 한다. 본 시스템은 공동 작업에 참여한 사용자들이 다른 참여자들에게 같은 뷰로써 공유된 미디어 또는 오류 객체들을 참조할 수 있도록 구축한다. 본 논문에서는 결함 허용을 통하여 신뢰성을 향상시키는 방법에 대해서 기술한다. ER은 분산 멀티미디어에서 하나의 소프트웨어 오류를 자동적으로 복구할 수 있는 시스템이다. 본 논문은 규칙-기반 DEVS(Discrete Event System Specification) 모델링과 시뮬레이션 기법을 사용하면서 분산 멀티미디어 상에서의 오류 복구 시스템의 성능 분석을 설명한다. DEVS에서 하나의 시스템은 시간, 입력, 상태, 출력 및 함수들을 가지고 있다.

• 한국BIM학회 논문집
• /
• 제9권1호
• /
• pp.42-51
• /
• 2019

Maintenance of aging structures has attracted societal attention. Maintenance of the aging structure can be efficiently performed with a digital twin. In order to maintain the structure based on the digital twin, it is required to accurately detect the damage of the structure. Meanwhile, deep learning-based damage detection approaches have shown good performance for detecting damage of structures. However, in order to develop such deep learning-based damage detection approaches, it is necessary to use a large number of data before and after damage, but there is a problem that the amount of data before and after the damage is unbalanced in reality. In order to solve this problem, this study proposed a method based on Generative adversarial network, one of Generative Model, for generating acceleration data usually used for damage detection approaches. As results, it is confirmed that the acceleration data generated by the GAN has a very similar pattern to the acceleration generated by the simulation with structural analysis software. These results show that not only the pattern of the macroscopic data but also the frequency domain of the acceleration data can be reproduced. Therefore, these findings show that the GAN model can analyze complex acceleration data on its own, and it is thought that this data can help training of the deep learning-based damage detection approaches.

• 대한산업공학회지
• /
• 제39권6호
• /
• pp.486-497
• /
• 2013

In this paper, we first present an in-depth survey of the research on Verification, Validation and Accreditation (VV&A) applied in various areas. Then we introduce the characteristics of the military and defense Modeling and Simulation (M&S) and propose the direction of method for VV&A with the identified characteristics. The M&S has been widely used in many different applications in the military and defense area including training, analysis, and acquisition. Methods and processes of VV&A have been proposed by researchers and M&S practitioners to guarantee the correctness of the M&S. The idea of applying the formal credibility assessment in VV&A is originated from the Software Engineering Reliability Test and Systems Engineering Development Process. However, the current VV&A techniques and processes proposed in the research community have not utilized the military-and-defense specific characteristics. We identify the characteristics and issues that can be found in the military and defense M&S. Then propose the direction of techniques and methods for VV&A considering the characteristics and issues. Also, possible research direction on the development of VV&A is proposed.