• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.10-18
• /
• 1997

This paper presents the development of real-time estimation and control details for a computer vision-based robot control method. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes know 4-axis Scorbot manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method. The method is tested experimentally in two ways : First the validity of estimation model is tested by using the self-built test model. Second, the practicality of the presented control method is verified in performing 4-axis manipulator's assembly task. These results show that control scheme used is precise and robust. This feature can open the door to a range of application of multi-axis robot such as deburring and welding.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.7
• /
• pp.615-620
• /
• 2001

This paper addresses the design of sliding model fuzzy-model-based controller using genetic algorithms. In general, the construction of fuzzy logic controllers has difficulties for the lack of systematic design procedure. To release this difficulties, the sliding model fuzzy-model-based controllers was presented by authors. In this proposed method, the fuzzy model, which represents the local dynamic behavior of the given nonlinear system, is utilized to construct the controller. The overall controller consists of the local compensators which compensate the local dynamic linear model and the feed-forward controller which is designed via sliding mode control theory. Although, the stability and the performance is guaranteed by the proposed method, some design parameters have to be chosen by the designer manually. This problem can be solved by using genetic algorithms. The proposed method tunes the parameters of the controller, by which the reasonable accuracy and the control effort is achieved. The validity and the efficiency of the proposed method are verified through simulations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.1064-1081
• /
• 2014

This paper presents a numerical analysis of slamming and whipping using a fully coupled hydroelastic model. The coupled model uses a 3-D Rankine panel method, a 1-D or 3-D finite element method, and a 2-D Generalized Wagner Model (GWM), which are strongly coupled in time domain. First, the GWM is validated against results of a free drop test of wedges. Second, the fully coupled method is validated against model test results for a 10,000 twenty-foot equivalent unit (TEU) containership. Slamming pressures and whipping responses to regular waves are compared. A spatial distribution of local slamming forces is measured using 14 force sensors in the model test, and it is compared with the integration of the pressure distribution by the computation. Furthermore, the pressure is decomposed into the added mass, impact, and hydrostatic components, in the computational results. The validity and characteristics of the numerical model are discussed.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1998

If a system has a large boundary and complexity, forecast's accuracy will be very low when consider the system's substance as black box. Thus, it is necessary that analysis by structure model. To examine competition in Northeast Asia Ports, it has assumed that the form of structure model, For which the System Dynamics method is adapted in this paper. Northeast Asia Ports Model includes five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung, - which are adjacent to each other by geographically and has a competition relation. The Northeast Asia Ports Model has several sub-systems which consists of each unit port models. And, each unit port model found by quantitive, qualititive factors and their feedback loops. All effects which components of one port have influence to components of the rest ports must be surveyed in order to construct Northeast Asia Ports Model, but it may be impossible currently. In this paper Northeast Asia Ports Model was simplified by HFP-Hierarchical Fuzzy Process Method-adapted to integration of level variables of unit port model. Container cargo volumes in Northeast Ports Model is distributed by results of HFP method. And distributed container cargo volumes effected to unit port model. Developed model can estimate change of container cargo volumes in competitive relation by alternation of simple parameter, and reflects dynamics characteristics which are included in model.

• Structural Engineering and Mechanics
• /
• v.54 no.6
• /
• pp.1217-1244
• /
• 2015

In this research a theoretical and numerical study on a bridge damage detection procedure is presented based on vibration measurements collected from a set of accelerometers. This method, referred to as "Adjoint Variable Method", is a sensitivity-based finite element model updating method. The approach relies on minimizing a penalty function, which usually consists of the errors between the measured quantities and the corresponding predictions attained from the model. Moving mass is an interactive model and includes inertia effects between the model and mass. This interactive model is a time varying system and the proposed method is capable of detecting damage in this variable system. Robustness of the proposed method is illustrated by correct detection of the location and extension of predetermined single, multiple and random damages in all ranges of speed and mass ratio of moving vehicle. A comparative study on common sensitivity and the proposed method confirms its efficiency and performance improvement in sensitivity-based damage detection methods. In addition various possible sources of error, including the effects of measurement noise and initial assumption error in stability of method are also discussed.

• IE interfaces
• /
• v.20 no.3
• /
• pp.315-326
• /
• 2007

The service industry is becoming greater importance in the current economy. The service quality has become an important competitive factor in service industry. Until now, 6 sigma method has well accomplished in manufacturing industry. 6 sigma method has been applied to the service industry to improve service quality, but it has not been reported that 6 sigma method is a successful method for service industry to improve service quality. In this paper, we suggest a MAVIC model to improve service quality. It is a model which is combined with advantages of a SERVQUAL model and 6 sigma method. We has proved its effect with applying a MAVIC model to real service techniques.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.38-51
• /
• 2007

This paper describes research results for the measurement and analysis method of magnetic signatures generated from the ship's magnetic mock-up model. In this paper, we present the theoretical and experimental techniques for the separation of the permanent and the induced magnetic field from the measured magnetic signature of the mock-up model. Also, we describe the prediction method of the induced magnetic field generated from mock-up model using the Magnet s/w, one of the FEM analysis tools for the electro-magnetic field and the magnetic dipole modelling method based on the least square techniques. The proposed modelling and analysis methods can be used for the prediction and the analysis of the static magnetic field generated from the real naval ship as well as the mock-up model.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.215-218
• /
• 2001

To improve the performance of PID controller of high order systems by model reduction, we proposed a new model reduction method in frequency domain. A new model reduction method we proposed, considered four points (${\angle}G(jw)=0$, $-{\pi}/2$, $-{\pi}$, $-3{\pi}/2$) in stead of two points (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve. And for high order systems that it have not two point (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve, we proposed a method to annex very small dead time. This method has a annexed very small dead time on the base model for reduction, and we cancel it after to get the reduced model. It is shown that the performance of proposed method is better than any other methods.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.5
• /
• pp.321-329
• /
• 2007

The present pipe modeling method requires detailed inputs from a designer to generate a pipe model, and thus it takes much time for the designer to perform such task. Moreover, the pipe model has no relation with the hull structure. Thus, it is time-consuming and requires much effort if design changes arise. In this study, a generating method that generates quickly many pipes using a pipe tray and a conversion method that converts automatically the pipes into objects related with the hull structure are proposed. A pipe modeling system based on the proposed methods is developed. The applicability of the developed system is demonstrated by applying it to the generation of the pipe model of a deadweight 300,000 ton VLCC(Very Large Crude oil Carrier). The results show that the developed system can quickly generate the pipe model in relation with the hull structure.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.305-313
• /
• 2011

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.