• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.

• 지질공학
• /
• 제18권1호
• /
• pp.69-81
• /
• 2008

산사태연구는 산사태를 발생시키는 여러 인자들의 상호관계를 규명하는 방법, 확률론적으로 산사태 발생가능성을 예측하는 방법 사태물질의 이동경로와 확산범위를 산정함으로써 산사태 위험성을 평가하는 방법 등으로 구분할 수 있다. 우리나라에서 발생된 대부분의 산사태는 여름철의 집중호우에 기인되는 것으로 기반암 상부의 토층에서 발생되며, 강우조건, 지형조건과 지질 및 토질특성 등에 영향을 받는 것으로 알려져 있다. 산사태 조사부터 위험성평가에 이르기까지의 산사태연구는 다양한 산사태를 체계적으로 조사하고 해석함으로써 공학적 관점에서 여러 특징들을 관찰하고 그 특성들을 총괄적으로 해석하여야만 한다. 이 연구에서는 경상남도 마천지역을 대상으로 산사태 현장조사를 수행하였다. 조사결과를 토대로 자연사면 산사태에 대한 최적의 표준모델로 활용할 수 있는 산사태 조사 및 해석 기법을 제안하고자 한다.

• Journal of Forest and Environmental Science
• /
• 제38권2호
• /
• pp.75-89
• /
• 2022

The negative impact of monoculture rubber plantations on biodiversity and associated ecological processes/ecosystem services has led to suggestions on the use of integrated land use systems for rubber cultivation and production in order to ensure environmental sustainability. However, there is paucity of information on the effect of such integrated land use systems on the diversity and abundance of the rubber plantation undergrowth. We evaluated and compared undergrowth plant species composition, richness, abundance, diversity and interaction, in three integrated systems (Rubber-Strelitzia reginae Integrated System - RSrIS, Rubber-Podocarpus nagi Integrated System - RPnIS & Naturally Managed Rubber Plantation - NMRP) with three Rubber Monoculture Plantations (RMP₁, RMP₂ & RMP₃) adjacent to the integrated systems, respectively, at the Investigation and Experiment Station of Tropical Crops, Danzhou, Hainan, China. Undergrowth species density was higher in the rubber monocultures than in the integrated systems except in RSrIS. Species richness and diversity were also higher in the monocultures except in NMRP. Species similarity/interaction between the monocultures and the integrated systems was highest between RMP₃ and NMRP. The NRMP proved to be the best model of natural rubber integrated system for the conservation of undergrowth species richness, diversity and interspecific interaction. However, the conservation of undergrowth species in other forms of integrated natural systems can be enhanced by considering the ecology of species to be integrated in terms of their growth characteristics, competitive nature, and ability to grow in association with other species.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1087-1091
• /
• 2007

Exact impedance modeling of the electrode/electrolyte interface is important in bio-signal sensing electrode development. Therefore, the investigation of the equivalent circuit models for the interface has been pursued for a long time by several researchers. Previous circuit models fit the experimental results in limited conditions such as frequency range, type of electrode, or electrolyte. This paper describes a new electrical circuit model and its capability of fitting the experimental results. The proposed model consists of three resistors and two constant phase elements. Electrochemical impedance spectroscopy was used to characterize the interface for Au, Pt, and stainless steel electrode in 0.9% NaCl solution. Both the proposed model and the previous model were applied to fit the measured impedance results for comparison. The proposed model fits the experimental data more accurately than other models especially at the low frequency range, and it enables us to predict the impedance at very low frequency range, including DC, using the proposed model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.350-355
• /
• 2005

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR Product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant Properties; the minor loop property and the wiping-out property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• Wind and Structures
• /
• 제17권6호
• /
• pp.565-587
• /
• 2013

Obvious vortex induced vibration (VIV) was observed during section model wind tunnel tests for a single main cable suspension bridge. An optimized section configuration was found for mitigating excessive amplitude of vibration which is much larger than the one prescribed by Chinese code. In order to verify the maximum amplitude of VIV for optimized girder, a full bridge aeroelastic model wind tunnel test was carried out. The differences between section and full aeroelastic model testing results were discussed. The maximum amplitude derived from section model tests was first interpreted into prototype with a linear VIV approach by considering partial or imperfect correlation of vortex-induced aerodynamic force along span based on Scanlan's semi-empirical linear model. A good consistency between section model and full bridge model was found only by considering the correlation of vortex-induced force along span.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.323-328
• /
• 2002

The control performance of a vehicle installed with an MR(magnetorheological) fluid-based damper is investigated on the basis of Herschel-Bulkley shear model. Generally, most of MR fluid damper has been analyzed based on a simple Bingham-plastic shear model. However, the Bingham-plastic shear model can not well describe the behavior of the damper on the condition of high velocity and high current field input. Therefore, in this study, the Herschel-Bulkley shear model in which the constant post-yield plastic viscosity in Bingham model is replaced with a power law model dependent on shear rate is used to assess control performance of a vehicle with MR fluid damper suspension system. This study deals with a two-degree-of-freedom suspension using the MR fluid damper for a quarter car model. The response for the bump input to identify the fastness of MR fluid damper embedded skyhook controller and requested magnetic field are investigated.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.3-11
• /
• 2006

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant properties; the minor loop property and the wiping-out. property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.104-110
• /
• 2010

In this study, a series of two-dimensional model test and numerical analysis was carried out to investigate the pile movement due to tunnelling in soft ground. The model test consists of 21 cases according to locations of the pile tip over the centre position of model tunnel. To identify both the pile and ground movements a close-range photogrammetric technique was adopted in the model test. The results from the model test were compared to the two-dimensional finite element analysis using the CRISP program. It was found that the rotation point on the pile was significantly affected by factors such as the offset distance from the model tunnel and the volume loss that occurred during the tunnelling operation.

• 정보학연구
• /
• 제2권1호
• /
• pp.191-207
• /
• 1999

본 연구는 고객만족모형의 선정에 있어 재구매 의사와 예측타당성을 체계적으로 검토하려는 시도이다. 일반적으로 고객만족의 측정을 위해서는 단일항목척도와 복수항목척도를 사용하고 있다. 그러나 고객이 제품특성을 잘 모르는 경우는 이용하는 모형이나 측정방법에 따라 계산된 지수의 신뢰성이나 구매의도와의 상관관계는 높지 않는 경우가 발생한다. 이러한 문제의 해결을 위하여 본 연구에서는 통상적으로 활용되는 고객만족지수의 다양한 측정방법들에 대해 예측타당성을 검토하여 적절한 모형을 찾아내려는 시도이다.