• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.9-14
• /
• 2001

A new model utilizing a transfer function is introduced in the present paper for analizing motion errors of hydrostatic tables. Relationship between film reaction force in a single hydrostatic pad and form error of a guide rail is derived at various spacial frequencies by finite element analysis, and it is expressed as a transfer function. This transfer function clarifies so called averaging effect of the oil film quantitively. For example, it is found that the amplitide of the film reaction force is reduced as the spacial frequency increases or relative width of the pocket is reduced. Motion errors of a multiple pad table is estimated from transfer function, geometric relationship between each pads and form errors of a guide rail, which is named as Transfer Function Method. Calculated motion errors by TFM show good agreement with motion errors calculated by Multi Pad Method, which is considered entire table as an analysis object. From the results, it is confirmed that the proposed TFM is very effective to analyze the motion errors of hydrostatic tables.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.77-82
• /
• 2013

By using simulation, compensating characteristics of a voltage sag compensator utilizing single-phase matrix converter is examined. System configuration is described and mathematical model of single-phase matrix converter is derived by using the state space averaging method. In addition, the single-phase matrix converter is stabilized by phase-lead compensation. Finally, compensating characteristics of the compensator is investigated for 500 W R-L load and it is demonstrated that the compensator can operate correctly for loads for the range of power factor 0.6 (lagging) - 0.8 (leading) and for up to 50% voltage sag.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.3-8
• /
• 1995

The anemometer measurements were obtained from stationary hot-film probe mounted between the forward and rear rotors of a model CRP which rotated the forward and different directions. Data collection was done at several locations between rotors. To establish rotor-rotor interaction flow mechanism that contributes noise increasement of the CRP, methods of simple and the double condition-at sampling have been developed. The former uses to find similarity of the wake the later fixes the forward rotor position in time or space and permits averaging the mean wake at any fixed rotor angular location. The variation of the forward wake Is strongly depending upon the rear rotor location.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.182-187
• /
• 1998

In this paper, the dynamic analysis and design of an AC to AC power supply with DC current link is presented. Despite many advantages of such a structure, its application in fixed frequency power supplies has received very little attention in the literature. Different issues related to dynamic analysis of the proposed system are considered. These include a simple averaging technique for modeling switching function generators, the concept of Internal Model Controllers, and necessary condition to avoid multiple crossing in ramp comparison methods. Theoretical and experimental results obtained from a DSP-based laboratory type setup are presented.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1200-1209
• /
• 2010

The main subject of this paper is to develop analytic method with which output power or sensitivity variations of a magnetostrictive ultrasonic transducer can be estimated with no aid of experiments. After the bias magnetic field deployed over the patch is calculated using finite element analysis for magnetostatics, the representative value is extracted by averaging these field values. The operating point on the characteristic curve for magnetostriction is identified by this value and then the output performance is calculated from it. It is verified that the results from this simple model match well with those of its experimental version and some limits of this modeling technique are also considered.

• 전기의세계
• /
• 제18권1호
• /
• pp.15-23
• /
• 1969

A lot of recent researches have shown that a Pseudo Random Binary Signal is a quite effective test signal to measure the impulse response of a plant. Generally speaking, however, such a response itself is not satisfactory to determine the appropriate control parameters or control inputs. Here, the author intends to estimate the unknown parameters of the First Order Plant with Dead Time by means of correlation method using M-sequence signal. The time constant T and the dead time L of the plant are eatimated with one tracking loop by automatically adjusting delay time .tau. of M-sequence signal according to variations of T and L. In this paper, a three level M-sequence signal is used as a test signal in order to avoid troublesome operations to calculate partial derivatives of a given performance index with respect to the parameters which are usually required in the Model Method. Several experiments with analogue computer using low pass filters as averaging circuits showed good results as expected.

• Journal of the Korean Data and Information Science Society
• /
• 제15권3호
• /
• pp.565-574
• /
• 2004

Classification tree algorithms including as CART by Brieman et al.(1984) in some aspects, recursively partition the data space with the aim of making the distribution of the class variable as pure as within each partition and consist of several steps. SUPPORT(smoothed and unsmoothed piecewise-polynomial regression trees) method of Chaudhuri et al(1994), a weighted averaging technique is used to combine piecewise polynomial fits into a smooth one. We focus on applying SUPPORT to a binary class variable. Logistic model is considered in the caculation techniques and the results are shown good classification rates compared with other methods as CART, QUEST, and CHAID.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.123-131
• /
• 1997

Design of single stage AC/DC converter with high power factor for low power level applications is proposed. The proposed converter gives the good power factor correction, low line current harmonic distortions, and tight output voltage regulations. This converter also has a high efficiency by employing an active clamp method and synchronous rectifiers. To verify the performances of the proposed converter, a 90W-converter has been designed. The modelling of this proposed converter is power formed using an averaging technique and based on this model a detailed analysis is carried out. This prototype meets the IEC555-2 requirements satisfactorily with nearly unity power factor and high efficiency.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.103.1-103.1
• /
• 2010

기후변화가 가속됨에 따라 이에 따른 수문환경의 변화 예측이 중요한 문제로 부각되고 있다. 본 연구에서는 기후변화 시나리오에 따른 경안천 유역의 부유사량 변화를 모의하였다. SRES A1B 시나리오를 채택하고 이 시나리오에서의 강수량 변화를 10개 GCM을 이용해 모의하였다. 샘플링 오차를 줄이기 위해 BMA(Bayesian model averaging)기법을 사용해 10개 GCM의 결과를 앙상블했다. 부유사량의 모의를 위해 SWAT 모형이 이용되었다. 모의 결과, 경안천 유역의 경우 강수량과 부유사량 모두 상당히 증가하는 것으로 나타났다. 안정하도를 위한 구조물 설계시, 이러한 변화를 고려하는 것이 적절할 것으로 판단된다.

• 한국지능시스템학회논문지
• /
• 제19권2호
• /
• pp.273-278
• /
• 2009

The determination of the associated weights in the theory of ordered weighted averaging (OWA) operators is one of the important issue. Recently, Wang and Parkan [Information Sciences 175 (2005) 20-29] proposed a minimax disparity approach for obtaining OWA operator weights and the approach is based on the solution of a linear program (LP) model for a given degree of orness. Recently, Liu [International Journal of Approximate Reasoning, accepted] showed that the minimum variance OWA problem of Fuller and Majlender [Fuzzy Sets and Systems 136 (2003) 203-215] and the minimax disparity OWA problem of Wang and Parkan always produce the same weight vector using the dual theory of linear programming. In this paper, we give an improved proof of the minimax disparity problem of Wang and Parkan while Liu's method is rather complicated. Our method gives the exact optimum solution of OWA operator weights for all levels of orness, $0\leq\alpha\leq1$, whose values are piecewise linear and continuous functions of $\alpha$.