• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.43-49
• /
• 1997

A rotating rigid disk, attached on a flexible shaft or supported by a torsional spring, experiences precessional whirling due to gyroscopic moment loading. It is well known in rotor dynamics area that, as the rotational speed increases, the precessional mode of the rotating rigid disk starts splitting into two: forward and backward precessional modes. On the other hand, it is also well known in disk vibration area that a rotating flexible disk also shows another kind of mode splitting phenomenon due to the rotation, resulting in forward and backward traveling waves. When rotating multiple flexible disks are coupled in vibration with the supporting Flexible shaft, the associated mode splitting should be compatible with the two seemingly different vibration analysis methods. This paper investigates the possibility of fusing the precessional and traveling wave mode splittings so that the bending coupled disk vibrations in HDD spindle systems can be better understood.

• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.130-135
• /
• 2015

Based on the extended nonlinear Schr$\ddot{o}$dinger equation, the influences of the filter effect on pulse splitting in a passively mode-locked erbium-doped fiber laser with positive dispersion cavity are investigated theoretically. Numerical results show that, as the bandwidth of the spectral filter decreases, the nonlinear chirp appended to the pulse increases under the combined action of the filter effect of the super-Gaussian spectral filter and the self-phase modulation effect. On further decreasing the bandwidth, the wave breaking of the pulse takes place. In addition, by varying the pump power of the laser or the profile of the spectral filter, the influences of the filter effect on pulse splitting also change accordingly.

• 한국해안해양공학회지
• /
• 제12권2호
• /
• pp.70-80
• /
• 2000

Princeton Ocean Model(POM)에서 지배방정식을 반음해법으로 차분화하여 mode splitting을 제거하고 조간대 처리기법을 도입한 3차원 semi-implicit 모델을 수립하였다 운동방정식의 순압경도력항과 수직방향 와동점 성향, 그리고 수심적분된 연속방정식의 속도발산항을 음해법으로 처리하여 빠르게 움직이는 표면중력파가 야기하는 수치안정조건을 제거하여 더 큰 time step을 사용할 수 있는 semi-implicit 모델을 수립하였다 수립한 3차원 semi-implicit 모델의 유효성과 계산휴율을 확인하기 위하여 이상적인 3차원 수로에 적용한 결과 semi-implicit 모델이 POM과 같은 결과를 주었으나 POM보다 약 4,.4배 정도 빠르게 수행되어 향상된 계산효율을 보여주었다. mode splitting 기법을 사용하는 POM의 유속 결과는 조간대에서 발생한 noise가주 수로에까지 전파되어 불안정 한 결과를 준 반면에 semi-implicit 모델결과는 더 큰 time step을 사용함에도 불구하고 조간대와 주 수로 모두에서 noiserk 없는 안정된 결과를 주었다 3차원 semi-implicit 모델의 현장 적용성을 확인하기 위하여 경기만에 적용한 결과 semi-implicit 모델이 모델 영역 전반에 걸쳐 관측된 조석 및 조류의 크기 및 전파양상을 잘 재현하였다.

• 한국광학회지
• /
• 제13권6호
• /
• pp.479-485
• /
• 2002

다중모드간섭을 이용한 임의 분배 비율의 광전력 분배기에 대한 벡터 해석법을 제시한다 광전력 분배는 집적 광학의 기초가 되는 부분이며 특히 광전력 비율을 임의로 조절할 수 있다면 많은 응용분야에 유용할 것이다. 본 벡터 해석법은 기존의 다중모드간섭 현상에 대한 해석적 결과를 도식화함으로써 임의 분배 비율의 다중모드간섭 광전력 분배기 설계를 보다 쉽게 할 수 있다는 장점을 가지고 있다.

• 터널과지하공간
• /
• 제29권6호
• /
• pp.523-531
• /
• 2019

암석역학이나 암반공학의 여러 활용 분야 중 발파, 천공 및 기계굴착의 경우에는 파괴인성이 중요한 요소이며, 암석의 파괴인성을 측정하기 위한 여러 가지 방법들이 제안되었다. 본 연구에서는 간단히 시험편을 제작할 수 있고, 압축 하중으로 암석의 모드 I 파괴인성을 구할 수 있도록 쐐기 분열 시험편(Wedge Splitting Test Specimen)을 이용하였다. 쐐기의 작용하는 연직하중에 의한 수직 및 수평하중 모두를 고려한 균열선단의 응력상태로부터 수치해석을 통한 응력확대계수의 식을 제안하였다. 쐐기 분열 시험편에 의해 구해진 모드 I 파괴인성값을 GD와 SENB 시험편의 시험 결과와 비교하여 시험법의 타당성을 확인하였다.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.102-108
• /
• 1998

A new 1*4 optical waveguide power divider is proposed and fabricated. It consists of a 1*4 multi-branch structure with a beam separator and two beam expanders that can control the splitting ratios between the output ports. The proposed optical waveguide power divider is designed by employing the two dimensional finite difference beam propagation method and is fabricated by a reactive ion etching method. The splitting ratio of fabricatd device is 25.0 : 25.7 : 25.3 : 24.0 for TE mode and 25.7 : 25.2 : 24.1 : 25.0 for TM mode. Comapred with the conventional Y-branch structure, the proposed structure shortens the length of a 1*N divider by the factor 3. Thus it reduces the total propagation loss and the total radiation loss at the branch points. furthermore, the splitting ratios between the output ports may be controlled in this structure for some special applications.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.123-131
• /
• 2020

The bond performance of glass fibre reinforced polymer (GFRP) bars and that of steel bars embedded in Alkali Activated Cement (AAC) concrete are analysed and compared using pull-out specimens. The bond failure modes, the average bond strength and the free end bond stress-slip curves are used for comparison. Tepfers' concrete ring model is used to further analyse the splitting failure in ribbed steel bar and GFRP bar specimens. The angle the bond forces make with the bar axis was calculated and used for comparing bond behaviour of ribbed steel bar and GFRP bars in AAC concrete. The results showed that bond failure mode plays a significant role in the comparison of the average bond stress of the specimens at failure. In case of pull-out failure mode, specimens with ribbed steel bars showed a higher bond strength while specimens with GFRP bars showed a higher bond stress in case of splitting failure mode. Comparison of the bond stress-slip curves of ribbed steel bars and GFRP bars depicted that the constant bond stress region at the peak is much smaller in case of GFRP bars than ribbed steel bars indicating a basic bond mechanism difference in GFRP and ribbed steel bars.

• 한국분무공학회지
• /
• 제26권3호
• /
• pp.149-156
• /
• 2021

In this study, the behavior of the droplet colliding with parallel wires was analyzed by time-delay photography. The impact behavior modes and the critical capture speed were analyzed by changing fluids, the droplet velocity, the wire diameter and the distance between wires. Seven typical modes of impacting droplet on parallel wires were observed. The tendency of mode change was generally similar when the wire diameter was changed, but the increase of the wire diameter caused the increase of the droplet velocity at which the mode changed. The modes at the highest droplet velocity were the splitting mode when the wires were closest, the passing and splitting mode in the middle, and the passing mode when the wires were farthest apart. The critical capture speed increased as the wire diameter increased and the distance between wires decreased. The ethanol droplet showed the lowest critical capture speed.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.919-924
• /
• 1993

Domain structure and the spatial arrangement of tetragonal and rhombohedral phases in PZT ceramics at MPB composition were investigated with a transmission electron microscope. Fringe Contrast and doublet spot splitting were observed in the image mode and the selected area diffraction pattern, respectively. Besides, triplet spot splitting was also observed in the other part of the specimen. These observations indicate that both the single phase regions and the regions which are comosed of alternatively arranged tetragonal and rhombohedral domains coexist in a PZT ceramics at the MPB composition.

• 폴리머
• /
• 제26권6호
• /
• pp.752-758
• /
• 2002

사슬길이가 서로 다른 두 종류의 n-paraffin 혼합물이 결정을 형성할 때 사슬의 움직임과 형성된 라멜라의 구조를 조사하기 위하여 FTIR, FT-Raman, XRD 실험방법을 이용하였다. FTIR crystal field splitting, Raman longitudinal acoustic mode, 그리고 SAXS long period 측정 결과들을 비교하여 사슬길이가 다른 두 n-paraffin 사슬이 혼합되어 하나의 라멜라를 형성하거나 분리되어 각각의 라멜라를 형성하는 과정을 연구하였다.