• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.408-427
• /
• 2011

Intensive computational complexity is an obstacle of enabling multiview video coding for real-time applications. In this paper, we present a fast macroblock (MB) mode selection algorithm for B frames which are based on the computational complexity analyses between the MB mode selection and reference frame selection. Three strategies are proposed to reduce the coding complexity jointly. First, the temporal correlation of MB modes between current MB and its temporal corresponding MBs is utilized to reduce computational complexity in determining the optimal MB mode. Secondly, Lagrangian cost of SKIP mode is compared with that of Inter $16{\times}16$ modes to early terminate the mode selection process. Thirdly, reference frame correlation among different Inter modes is exploited to reduce the number of reference frames. Experimental results show that the proposed algorithm can promote the encoding speed by 3.71~7.22 times with 0.08dB PSNR degradation and 2.03% bitrate increase on average compared with the joint multiview video model.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.109-118
• /
• 1994

We proposed new field/frame mode selection quantization and buffer control strategy for interlaced digital HDTV image coding system. The field/frame mode selection is performed based on the mean square error and number of generated bits for each superblock. The quantization factor for each superblock is determined by the characteristics of human visual system and buffer status. The statistical characteristics of the number of generated bits for basis block and the prediction of buffer status are used for buffer control. Simulation results show that the proposed field/frame mode selection and rate buffer control. Simulation results show that the proposed field/frame mode selection and rate buffer control strategy have good subjective image quality and have stable buffer status.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.260-264
• /
• 2008

In this paper, a dual mode baseband analog channel selection filter is described which is designed for the Bluetooth and WCDMA wireless communications. Using the presented current-mode integrator, a dual mode channel selection filter is designed. To verify the current-mode integrator circuit, Hspice simulation using 1.8V Hynix $0.18{\mu}m$ standard CMOS technology was performed and achieved $50.0{\sim}4.3dB$ gain, $2.29{\sim}10.3MHz$ unity gain frequency. The described third-order dual mode analog channel selection filter is composed of the current-mode integrator, and used SFG(Signal Flow Graph) method. The simulated results show 0.51, 2.40MHz cutoff frequency which is suitable for the Bluetooth and WCDMA baseband block each.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.787-806
• /
• 2016

Mixed-mode (MM) designs in which data are collected by different modes in one design have become increasingly popular. An MM data collection has several advantages such as reductions of coverage error, non-response and cost. However, MM designs may introduce mode effects that are confounded by selection effects and measurement effects, which can make MM data quality poor. In order to investigate mode effects, SRI implemented a concurrent mixed-mode experiment in 2014 where respondents could choose between a self-administrated Web survey and a self-administrated paper survey. This paper separately estimates selection effects and measurement effects. We found that measurement effects on some items are large.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.19-25
• /
• 2008

When there are numerous wireless communication systems co-existing in the limited available frequency resource, an unexpected time delay can be caused during the system switching. So, in order to reduce this time delay, a mode selection method is required. In this paper, we propose a mode selection method to minimize the time delay for multi-system wireless communication systems. For the sake of efficiency, the mode selection method is designed by analyzing the preamble characteristics of different standards. Instead of performing a full search, we propose the preamble partial search to reduce the time delay to a minimum. Simulated with Matlab in an additive white Gaussian noise(AWGN) environment with a signal to noise ratio(SNR) of 10dB and bit error rate(BER) of $10^{-6}$, we evaluated and showed the performance improvement gained by using our proposed mode selection method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1807-1813
• /
• 2018

In this paper, the fault line selection and location problems of single line-to-ground (SLG) fault in distribution network are addressed. Firstly, the adaptive filtering property for empirical mode decomposition is formulated. Then in view of the different characteristics showed by the intrinsic mode functions(IMF) under different fault inception angles obtained by empirical mode decomposition, the sign of peak value about the low-frequency IMF and the capacitance transient energy is chosen as the fault line selection criteria according to the different proportion occupied by the low-frequency components. Finally, the fault location is determined based upon the comparison result with adjacent fault passage indicators' (FPI) waveform on the strength of the interaction between the distribution terminal unit(DTU) and the FPI. Moreover, the logic nodes regarding to fault line selection and location are newly expanded according to IEC61850, which also provides reference to acquaint the DTU or FPI's function and monitoring. The simulation results validate the effectiveness of the proposed fault line selection and location methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.6-12
• /
• 2008

The dispersion and attenuation of Lamb and Leaky Lamb waves propagating in a 1 mm-thick steel plate were investigated. For acquiring a long(or large) range inspection capability, the fundamental symmetric and anti-symmetric wave modes(S0 and A0) over law frequencies were studied. Based on the dispersion curves, as well as pitch-catch and multi-mode simulations, it was shown that the S0 mode over law frequencies is the proper mode to minimize the dispersion and attenuation. In addition, it was shown that the S0 mode couldbe easily distinguished under multi-mode simulation since it has a larger group velocity than the A0 mode.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.549-553
• /
• 2002

Although the magnetostrictive sensors have received much attention in recent years. the investigations on the selection of a desired mode have not been reported. The purpose of this investigation is to present a technique to select a desired mode in a solid ferromagnetic cylinder using a non-contact magnetostrictive sensor. To achieve this goal. we propose new bias magnet configurations to select longitudinal and flexural waves. A few experimental results confirm the validity of the present investigation.