• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.20-27
• /
• 1998

In the current seismic design codes design earthquake is usually defined as the earthquake with the 90 percent probability of not being exceeded in the life time of a structure which is assumed as 50 years equivalent to the earthquake with 475 year recurrence period. However the life time of tall building structures may be much longer than 50 yers. The current seismic design code requires the modal analysis or dynamic time history analysis for the buildings with the height exceeding a certain height limit. The objective of this study is to collect the earthquake ground motion(EQGM) which can be used for dynamic time history analysis for tall buildings. For this purpose linear elastic design response spectrum (LEDRS) in the code is scaled to account for the recurrence period of the design earthquake. The earthquake ground motions which has been recorded are calibrated to fit the scaled LEDRS. The set of calibrated EQGM can be treated as design EQGM for the design of tall building with longer lifetime than ordinary building.

• Structural Engineering and Mechanics
• /
• 제15권6호
• /
• pp.669-683
• /
• 2003

The stochastic optimal nonlinear control of coupled adjacent building structures is studied based on the stochastic dynamical programming principle and the stochastic averaging method. The coupled structures with control devices under random seismic excitation are first condensed to form a reduced-order structural model for the control analysis. The stochastic averaging method is applied to the reduced model to yield stochastic differential equations for structural modal energies as controlled diffusion processes. Then a dynamical programming equation for the energy processes is established based on the stochastic dynamical programming principle, and solved to determine the optimal nonlinear control law. The seismic response mitigation of the coupled structures is achieved through the structural energy control and the dimension of the optimal control problem is reduced. The seismic excitation spectrum is taken into account according to the stochastic dynamical programming principle. Finally, the nonlinear controlled structural response is predicted by using the stochastic averaging method and compared with the uncontrolled structural response to evaluate the control efficacy. Numerical results are given to demonstrate the response mitigation capabilities of the proposed stochastic optimal control method for coupled adjacent building structures.

• Structural Engineering and Mechanics
• /
• 제45권2호
• /
• pp.233-257
• /
• 2013

Given the yield shear of a single-story inelastic structure with simple eccentricity, the problem of strength distribution among the resisting elements is investigated, with respect to minimize its torsional response during a ground motion. Making the hypothesis that the peak accelerations, of both modes of vibration, are determined from the inelastic acceleration spectrum, and assuming further that a peak response quantity is obtained by an appropriate combination rule (square root of sum of squares-SRSS or complete quadratic combination-CQC), the first aim of this study is to present an interaction relationship between the yield shear and the maximum torque that may be developed in such systems. It is shown that this torque may be developed, with equal probability, in both directions (clockwise and anticlockwise), but as it is not concurrent with the yield shear, a rational design should be based on a combination of the yield shear with a fraction of the peak torque. The second aim is to examine the response of such model structures under characteristic ground motions. These models provide a rather small peak rotation and code provisions that are based on such principles (NBCC-1995, UBC-1994, EAK-2000, NZS-1992) are superiors to EC8 (1993) and to systems with a stiffness proportional strength distribution.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1265-1271
• /
• 2011

본 논문에서는 유한요소 모델을 사용한 유체-구조 해석을 통하여 원자력 발전소 임시 받침대의 내진에 대한 안전성을 평가하였다. 임시받침대는 수중에 존재하기 때문에 유체-구조 연성을 통하여 유체의 영향을 고려하였다. 유체의 영향은 구조물의 단위길이당 추가질량으로 정의하여 적용하였다. 각각의 운전기준지진(OBE)과 안전정지지진(SSE)의 설계조건을 층응답스펙트럼(Floor Response Spectrum: FRS)으로 적용하여 진동해석과 내진해석을 수행하였다. 해석된 임시받침대의 최대변위는 운전기준지진에서 0.29mm 이고, 운전정지지진에서 최대변위는 0.36 mm 이다. 최대응력은 운전 기준지진에서 17.9 MPa, 안전정지지진에서 19.6 MPa 이며, 이 값은 재료의 항복강도의 23 %, 14 % 수준이다.

• 한국전산구조공학회논문집
• /
• 제14권1호
• /
• pp.1-9
• /
• 2001

유체-구조물 상호작용 효과를 고려하여, 실린더형 수중 구조물의 유한요소 모델을 상용 전산코드를 사용하여 작성하고 동적하중에 대한 응답해석을 수행하였다. 구조 유한요소에 부착되는 유체 유한요소로 인하여 발생하는 요소행렬의 비대칭성으로 인하여, 일반적으로 사용되는 유한요소 해석 전산코드로 유체-구조물 상호작용 모델에 대한 응답스펙트럼해석을 수행하는 것은 불가능하다. 이 문제의 해결을 위하여, 등가 비 유체-구조물 상호작용 모델을 구성하고, 등가비 유체-구조물 상호작용 모델에 대한 응답스펙트럼 해석 및 조화가진 응답해석 결과를 이용하여 유체-구조물 상호작용 모델의 스펙트럼 가진에 대한 동적 응답을 계산할 수 있는 효율적인 방법을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.110-115
• /
• 2014

The nuclear power plant was launched by Kori unit 1 in 1978 years. Currently, 23 nuclear power plants have been operating in Korea since 1978 years. The localization was completed for most of the reactor facility from Hanbit(Youngkwang) unit 3&4. However, RCP(Reactor Coolant Pump) and MMIS(Man Machine Interface System) is an important technology that has been excluded from the scope of the technical transfer has been dependent on a specific overseas vendor. Recent success in RCP development through co-operation with government and industries. Developed RCP will be applied to Shin-Hanul unit 1&2 nuclear power plants. The RCP operates in high speed and high pressure condition and only rotating component in the NSSS(Nuclear Steam Supply System). Therefore, the problem of vibration has arisen caused by the hydraulic forces of the working fluid. These forces can influence on the stability characteristics for entire RCS(Reactor Coolant System) loop, and can act as significant destabilizing forces. In this study, vibration evaluation of the pump shaft of development RCP estimated under normal operation and over speed conditions. In order to predict the vibration characteristics and dynamic behavior, modal analysis, critical speed analysis and unbalance response spectrum analysis were performed.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.299-307
• /
• 2011

The offshore plants such as FPSO are subjected to combination loading of environmental conditions (swell, wave, wind and current). Therefore the fatigue damage is occurred in the operation time because the units encounter the environmental phenomena and the structural configurations are complicated. This paper is a research for frequency domain fatigue analysis of wide-band random loading focused on accuracy of fatigue damage estimation regarding the proposed methods. We selected ideal bi-modal spectrum. And comparison between time-domain fatigue analysis and frequency-domain fatigue analyses are conducted through the fatigue damage ratio. Fatigue damage ratios according to Vanmarcke's bandwidth parameter are founded for wide-band. Considering safety, we recommend that Jiao-Moan and Tovo-Benasciutti methods are optimal way at the fatigue design for wide-band response. But, it is important that these methods based on frequency-domain unstably change the accuracy according to the material parameter of S-N curve. This study will be background and guidance for the new frequency-domain fatigue analysis development in the future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.376-381
• /
• 2003

This study is focused on the dynamic response of curved bridge when the rubber tired AGT vehicles is running with alternative articulations. For the analytic approach, there is necessary for the three dimensional vehicle model with 11 degree of freedom and the three dimensional curved bridge model by means of finite element method. It can be described by conventional Lagrangian formula with respect to the dynamic interactions between vehicles and its met bridge. The formula is implemented by Fortran language on the simulation program designated BADIA II(Bridge-AGT Dynamic Interaction Analysis II). The solutions of the formula are derived by Newmark- ${\beta}$ method. The BADIA II is for the dynamic interactions between vehicle and curved bridge in terms of the roughness of running surface and guide rail. The applicability of the BADIA II is verified in terms of displacement and modal frequency. This study is described that the dynamic interactive behaviors between the rubber tired AGT vehicle and curved bridge in terms of the radius of curvatures of curved bridge, vehicle articulations, vehicle speeds, vehicle weights, flatness of running surface and roughness of guide rail using BADIA II.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1062-1068
• /
• 2009

In this study, the impact force levels of bang machine and impact ball were measured, then the heavy-weight impact sounds generated by the bang machine and impact ball were investigated. It was found that the heavy-weight impact sources generated through modal excitation, and the impact force of the impact ball was similar to that of real impact source. The heavy-weight impact sounds were also measured in the real apartments with different slab thickness and floor structures. The results showed that the floor impact sound levels in terms of $L_{iFmax,AW}$, generated by impact ball sounds were reduced by using the resilient isolators. The frequency characteristics of heavy-weight impact sounds at 125 and 250 Hz were consistent with the characteristics of impact force spectrum. However, the difference between the impact sounds and the impact forces were found at 63 and 500 Hz due to the resonance of the floor structure and flanking noise, respectively.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.759-769
• /
• 2013

기동중인 헬리콥터는 공기역학적인 현상에 의하여 발생하는 불규칙 진동과 회전날개의 작동으로 인한 정현파 진동이 합성되어 발생하는 진동, 작업 및 착륙 시 발생하는 충격, 그리고 갑작스런 기동 시 발생하는 가속도와 같은 동적 하중에 노출 된다. 이때 발생하는 진동과 같은 동적 하중은 기체내부로 전달되어 헬리콥터운용에 필요한 전자장비를 가진 한다. 과거에 이러한 현상을 최소화하기 위하여 진동크기 감쇠시키기 위한 완충기를 전자장비의 장착대에 적용하여 왔다. 그러나 헬리콥터의 경우, 저주파에서 정현파 가진이 발생하므로 완충기 적용은 오히려 장착 플레이트 및 전자장비 부품의 파손을 발생시킬 수 있다. 이 연구에서는 완충기를 제거한 장착대를 동적 하중에 강건하며 전자장비에 전달되는 진동크기를 최소화 하도록 설계하였다. 완충기를 제거한 장착 대를 적용 시, 무게와 부피를 획기적으로 줄일 수 있으며 전자장비를 기체에 체결하는 나사 수가 적어짐에 따라 체결작업에 필요한 시간이 감소되는 장점을 갖는다. 최적화 해석에 적용되는 동적 하중을 선정하기 위하여 진동, 충격, 가속도하중을 비교 분석하여 가장 결정적인 동적 하중인 진동에 의한 하중을 선정하였다. 전체모델 유한요소 해석을 통하여 전자장비의 동적 거동을 분석하고 최적화 해석에 필요한 단순화 모델을 구축하였으며, 모달 테스트를 통해서 동특성을 검증하였다. 위상 최적화를 적용하여 강성대비 체적비가 큰 장착대의 형상을 도출한 후 고유진동수, 응력을 제약조건으로 무게가 최소화 되도록 하는 파라미터 최적화를 수행하여 장착대의 최종 형상 및 치수를 결정하였다. 개선모델은 체적 및 질량이 약 13 % 감소하였으며 사용시간은 규격대비 9.2배 증가하였다. 마지막으로 최적화된 장착대를 운용중인 실제 장비에 적용하여 진동환경에 대한 안정성을 평가하였다.