• 영어어문교육
• /
• 제12권3호
• /
• pp.99-122
• /
• 2006

The purpose of this paper is to explain the meanings and uses of the English auxiliaries SHALL/WILL. The complexity of modern usage of SHALL/WILL has been one of the most disputable themes of traditional English grammar. The paper purported to address the study and analysis of diachronic and synchronic approach to the two auxiliaries. A general view of the figures of Fries'(1925) survey was added for further investigation. The results of the study showed that these auxiliaries express some of various modal meanings associated with the volitional or emotional attitude of the speaker without implying futurity. The findings also suggested that the use of SHALL in present-day English is restricted to non-volitional future with the first person but the practice of this use is also diminished by the expansion of the use of WILL, and the original meaning of WILL, 'to desire or wish', has generally been replaced by other verbs or modal forms. But sentences which seem to indicate futurity are often tinged with modal senses. Therefore, WILL/SHALL should be considered to act either as tense auxiliary or as modal auxiliary depending on situational contexts in which it occurs.

• 아시아태평양코퍼스연구
• /
• 제2권1호
• /
• pp.23-34
• /
• 2021

This research examines Japanese non-native speakers' (JNNS) modal auxiliary verb use from two different perspectives: frequency of use and preferences for modalities. Additionally, error analysis is carried out to identify errors in modal use common among JNNSs. Their modal use is compared to that of English native speakers within a spoken dialogue corpus which is part of the International Corpus Network of Asian Learners' English. Research findings show at a statistically significant level that when compared to native speakers, JNNSs underuse past forms of modals and infrequently convey epistemic modality, indicating the possibility that JNNSs fail to express their opinions or thoughts indirectly when needed or to convey politeness appropriately. Error analysis identifies the following three types of common errors: (1) the use of incorrect tenses of modal verb phrases, (2) the use of inflected verb forms after modals, and (3) the non-use of main verbs after modals. The first type of error is largely because JNNSs do not master how to express past meanings of modals. The second and third types of errors seem to be due to first language transfer into second language acquisition and JNNSs' overgeneralization of the subject-verb agreement rules to modals respectively.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.45-50
• /
• 2014

In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member and suggested new possibility of the special seat with the auxiliary plastic member for movie theater chair. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of a mesh type plastic member and applied to the design of practical chair seat.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.40-46
• /
• 2013

This paper describes the suggestion of the special seat with the auxiliary plastic member for movie theater chair. In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member. And we have confirmed that it was more effective on vibration transfer than the chair seat of foaming sponge only. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. By applying experimentation to the prototype as well as the experimental modal analysis method, we made sure that the effect of the vibration transfer could be improved through the use of a mesh type plastic member as similar as the auxiliary spring member.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.51-73
• /
• 2014

A three-dimensional finite element model for the Jiashao Bridge, the longest multi-span cable-stayed bridge in the world, is established using the commercial software package ANSYS. Dynamic characteristics of the bridge are analyzed and the effects of structural system measures including the rigid hinge, auxiliary piers and longitudinal constraints between the girders and side towers on the dynamic properties including modal frequency, mode shape and effective mass are studied by referring to the Jiashao Bridge. The analysis results reveal that: (i) the installation of the rigid hinge significantly reduces the modal frequency of the first symmetric lateral bending mode of bridge deck. Moreover, the rigid hinge significantly changes the mode shape and effective mass of the first symmetric torsional mode of bridge deck; (ii) the layout of the auxiliary piers in the side-spans has a limited effect on changing the modal frequencies, mode shapes and effective masses of global vibration modes; (iii) the employment of the longitudinal constraints significantly increases the modal frequencies of the vertical bending modes and lateral bending modes of bridge deck and have significant effects on changing the mode shapes of vertical bending modes and lateral bending modes of bridge deck. Moreover, the effective mass of the first anti-symmetric vertical bending of bridge deck in the longitudinal direction of the fully floating system is significantly larger than that of the partially constrained system and fully constrained system. The results obtained indicate that the structural system measures of the multi-span cable-stayed bridge have a great effect on the dynamic properties, which deserves special attention for seismic design and wind-resistant design of the multi-span cable-stayed bridge.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.79-84
• /
• 1990

The modal parameter estimations of linear multi-degree-of-freedom structural dynamic systems are carried out in time domain. For this purpose, the equation of motion is transformed into the autoregressive and moving average model with auxiliary stochastic input (ARMAX) model. The parameters of the ARMAX model are estimated by using the sequential prediction error method. Then, the modal parameters of the system are obtained thereafter. Experimental results are given for a 3-story building model subject to ground exitations.

• 영어어문교육
• /
• 제18권3호
• /
• pp.175-190
• /
• 2012

The purpose of this article is to explain the meanings and uses of the English auxiliaries will morpho-syntactically, and answer the question of whether will is a tense auxiliary or a modal one. Some writers even exclude will completely from the semantics of the modal auxiliaries. They argue that the semantics of will is fundamentally non-modal and has only a few modal-like uses. There are some people who treat will to be semantically separate from the other modal auxiliaries. In the light of modal will, the semantics of will basically remains anchored in volition because the lack of required speaker subjectivity, but has undergone so much semantic bleaching that it may also express future time without volition. On the other hand, the semantics of will in the exclusionist view is erroneous and that its semantics is in fact closely related to the semantics of the other modals. This view reinforces the argument that the morpho-syntactic kinship of will, can, may and must also reflects semantic kinship. It is suggested that all the modal auxiliaries show that the correspondence relation is non-verified but potential. And the specific place that will holds is that the correspondence is unverified at the time of utterance but will turn out to become verified. The overall conclusion is that idiosyncratic morpho-syntax shared by the modals reflects the semantics and pragmatics of the English modal auxiliaries and is forced also to include will.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.42-49
• /
• 2013

The global movie industry is continuing rapid growth through application of the latest technology. 3D movies are being produced and shown for a more effective viewing experience. Special chairs for audiences are being experimentally manufactured and installed for the greatest viewing effect. This special chair has a structure that applies vibrating stimuli to specific parts of the body by attaching vibration transducers to theater chairs and synchronizing it with each scene of the movie. In a previous study, it has been confirmed that we can analyze the vibration transfer characteristics of sponge seats through the application of an experimental modal analysis method and obtain design variables easily. In this paper, we examine the major design parameters needed in the development of a foaming sponge seat in which auxiliary springs are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of an auxiliary member.

• 소음진동
• /
• 제6권1호
• /
• pp.97-106
• /
• 1996

This paper presents systematic study of the experimental application of a free-interfaced component mode synthesis method. In the free-interfaced component mode synthesis method, an error the to truncated higher modes and neglected ineria loadings on a component from the connected component is inherent. Also, it is difficult to directly use experimental modal data in a modal synthesis method which links experimental model to finite-element model because of many inconsistencies between experimentally obtained and analytically obtained modal vectors and missing degrees-of-freedom (DOFs) such as rotational DOFs. In order to solve these problems, three methods, the first one based on attaching auxiliary weights to the connection points, the second one utillizing the normalization of experimental modal vector, and the third one generating smoothed and expanded experimental mode shapes, are studied in this paper. Finally, the study is illustrated for a flat-plate structure by using simulated and measured experimental data.

• Smart Structures and Systems
• /
• 제12권5호
• /
• pp.547-577
• /
• 2013

To suppress vibration and noise of mechanical structures piezoelectric ceramics play an increasing role as effective, simple and light-weighted damping devices as they are suitable for sensing and actuating. Out of the various piezoelectric damping methods this paper compares mode based active control strategies to passive shunt damping for thin plates. Therefore, a new approach for the optimal placement of the piezoelectric sensors/actuators, or more general transducers, is proposed after intense theoretical investigations based on the Kirchhoff kinematical hypotheses of plates; in particular, modal and nilpotent transducers are discussed in detail. Based on the proposed distribution a discrete design for modal transducers is implemented, tested and verified on an experimental setup. For active control the modal sensors clearly identify the eigenmodes, whereas the modal actuators impose distributed eigenstrains in order to reduce the transverse plate vibrations. In contrast to the modal control, passive shunt damping works without requiring additional actuators or auxiliary power and can therefore act as an autonomous system, but it is less effective compensating the flexible vibrations. Exemplarily, an acryl glass plate disturbed by an arbitrary force initialized by a loudspeaker is investigated. Comparing the different methods their specific advantages are highlighted and a significant broadband reduction of the vibrations of up to -20dB is obtained.