• Computers and Concrete
• /
• 제28권5호
• /
• pp.465-478
• /
• 2021

On the premise of ensuring that the static performance of the concrete spreader is met, the first-order natural frequency of the concrete spreader is increased, and the weight of the main beam is reduced. ANSYS is used as an analysis tool to perform modal analysis on the concrete spreader. The natural frequency, mode shape and modal test verification will be obtained to ensure the accuracy of finite element model analysis. Using the ANSYS designxplorer module, the size of the main beam is set, and the response surface model between the parameter variables and the optimization objective is established according to the experimental design points. Screening algorithm and MOGA algorithm are used to multi-optimize the stress, first-order natural frequency and girder weight, and the optimal solution is obtained by comparison. The results of modal analysis are consistent with those of the experiment, and a set of optimal solutions is obtained through the optimization algorithm. The optimal solution obtained can meet the purpose of increasing the first-order natural frequency of the concrete spreader and reducing the weight of the main beam under the premise of ensuring the overall dynamic and static performance of the concrete spreader.

• 한국소음진동공학회논문집
• /
• 제22권5호
• /
• pp.480-488
• /
• 2012

The aircrafts with high aspect ratio wings made by a composite material have been developed, which enable high energy efficiency and long-term flight by reducing air resistance and structural weight. However, they have difficulties in securing the aeroelastic stability such as the flutter because of their long and flexible wings. The flutter is unstable self-excited-vibration caused by interaction between the structural dynamics and the aerodynamics. It should be verified analytically prior to first flight test that the flutter does not happen in the range of flight mission. Normally, the finite element model is used for the flutter analysis. So it is important to construct the finite element model representing dynamic characteristics similar to those of a real aircraft. Accordingly, in this research, to acquire dynamic characteristics experimentally the modal test of the aircraft with high aspect ratio composite wings was conducted. And then the modal parameters from the finite element analysis(FEA) were compared with those from the modal test. To make analysis results closer to test results, the finite element model was updated by means of the sensitivity analysis on variables and the optimization. Finally, it was proved that the updated finite element model is reliable as compared with the results of the modal test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.233-237
• /
• 1998

In this work, to identify the dynamic characteristics of disk-spindle system in hard disk drive, experimental modal analysis was performed. And an experimental analysis system including testing apparatus, precision sensors, and analysis software was established in order to perform the testing effectively. From the experimental results, coupled and uncoupled modal characteristics of 3-disk spindle system are clearly identified.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.539-544
• /
• 2006

본 논문에서는 모터와 롤러에 의해 발생된 진동이 프레임에 전달되고 또한 롤러가 회전하면서 프레임에 진동을 전달하여 공진을 일으킬 수 있으므로 프레임과 롤러의 고유진동수를 해석함으로서 진동발생 요인인 모터의 회전 주파수를 제어하고 진동에 대한 트레드밀 기구의 구조적 안전성을 평가하였다.

• 한국강구조학회 논문집
• /
• 제24권4호
• /
• pp.399-410
• /
• 2012

본 연구에서는 실험적 모드해석 기법을 이용하여 캔틸레버 및 양단고정 직사각형 적층복합판의 동적 테스트가 수행되었다. 균열 성장으로 인한 손상평가를 위하여 적층복합판에 인위적인 단계별 손상(균열)을 가하였으며, 충격해머 모드실험에 의해 얻어진 주파수응답함수(FRF), MAC(Modal Assurance Criterion) 값 및 모드매개변수(진동수, 모드형상, 감쇠비)의 변화를 분석하였다. 각 단계별 손상에 대한 적층복합판의 실험적 모드매개변수를 검증하기 위하여 유한요소해석으로부터 구한 고유진동수와 모드형상을 비교하였다. 손상은 벤치마크로서의 유한요소모델을 보정하는 과정으로부터 얻게 되는 적층복합판의 기하학적 특성 및 구조적 거동의 변화를 통하여 평가될 수 있음을 보여주었다.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.119-128
• /
• 2012

본 연구에서는 실험적 모드해석 기법을 이용하여 외부환경에 직접 노출되어 있는 실제 철도판형교의 full-scale 동적 테스트가 수행되었다. 충격해머 모드실험에 의해 얻어진 철도판형교의 모드 매개변수를 유한요소해석으로부터 구한 고유진동수와 모드형상과 비교, 분석하였다. 실험적 모드해석에 의해 측정된 실험 데이터와 해석적 진동분석에서 얻어지는 출력만의 데이터를 교량 부재의 기하학적 특성 및 재료적 특성을 다양하게 고려하여 모델보정 테크닉에 적용하였다. 철도판형교의 실험적 모드해석 결과를 검증하기 위한 유한요소모델이 모드인식 기법을 이용하여 보정되었다. 실험 데이터와 유한요소해석 기준모델의 모델보정과정의 결과와 함께 부재특성의 변화를 통하여 이루질 수 있는 손상평가에 대한 기초적 데이터베이스가 제공된다.

• Computers and Concrete
• /
• 제10권3호
• /
• pp.277-294
• /
• 2012

The aim of the study is to determine the modal parameters of a prototype damaged arch dam by operational modal analysis (OMA) method for some damage scenarios. For this purpose, a prototype arch dam-reservoir-foundation model is constructed under laboratory conditions. Ambient vibration tests on the arch dam model are performed to identify the modal parameters such as natural frequency, mode shape and damping ratio. The tests are conducted for four test-case scenarios: an undamaged dam with empty reservoir, two different damaged dams with empty reservoirs, and a damaged dam with full reservoir. Loading simulating random impact effects is applied on the dam to crack. Cracks and fractures occurred at the middle of the upper part of the dams and distributed through the abutments. Sensitivity accelerometers are placed on the dams' crests to collect signals for measurements. Operational modal analysis software processes the signals collected from the ambient vibration tests, and enhanced frequency domain decomposition and stochastic subspace identification techniques are used to estimate modal parameters of the dams. The modal parameters are obtained to establish a basis for comparison of the results of two techniques for each damage case. Results show that approximately 35-40% difference exists between the natural frequencies obtained from Case 1 and Case 4. The natural frequencies of the dam considerably decrease with increasing cracks. However, observation shows that the filled reservoir slightly affected modal parameters of the dam after severe cracking. The mode shapes obtained are symmetrical and anti-symmetrical. Apparently, mode shapes in Case 1 represent the probable responses of arch dams more accurately. Also, damping ratio show an increase when cracking increases.

• 대한토목학회논문집
• /
• 제31권2A호
• /
• pp.59-69
• /
• 2011

성능기반 내진 설계방법의 설계철학을 가지고 있는 비선형 정적 해석법(NSPs)은 최근 구조물의 지진해석방법으로서 그 사용성을 인정받고 있다. 비선형 정적 해석법을 통한 지진해석은 기존의 비선형 시간 이력법에 비해서 방법이 간단하며, 직관적으로 구조물의 지진해석을 수행할 수 있는 등의 장점으로 빌딩구조물의 지진해석법으로 널리 사용되고 있다. 하지만, 기본 진동모드에 의해서 구조물의 거동이 지배되지 않는 구조물의 경우에는 그 사용성에 대한 연구가 매우 제한적이다. 이를 개선하기 위한 고차모드의 기여분을 반영할 수 있는 비선형 정적 해석법으로 모드별 비탄성 정적해석법(Modal Pushover Analysis; MPA)이 제시되었고, 또한 이를 개선한 개선된 모드별 비탄성 정적해석법(Improved Modal Pushover Analysis; IMPA) 역시 소개되었다. 본 논문에서는 기존에 소개된 네가지 비선형 정적 해석법을 이용하여 국내에 설계/시공된 두 사장교의 지진해석 가능성을 알아보며, 각 방법의 장/단점을 분석 하여 비선형 정적 해석법의 응용가능성에 대해서 알아보았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1384-1387
• /
• 2001

Presented is a method to predict strain responses from displacement measurements on a mechanical structure. The method consists of forming a transformation matrix, which is calculated from displacement and strain modal matrices. The modal matrices can be obtained by either finite element analysis or modal testing. One disadvantage of the method is that it requires displacements on all measuring points be measured simultaneously. The strain prediction method is applied to a simple simulated system.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.66-75
• /
• 2006

A modeling method for the modal analysis of rotating beam structures having complex configurations employing multi-reference frames is presented in the present study. In most structural analysis methods, single reference frame is employed for the modal analysis. For simple structures such as single beam or single plate, the method of employing single reference frame usually provides rapidly converging accurate results. However, for general structures having complex configurations, such a method provides slowly converging, and often erroneous, results. In the present study, the effects of employing multi-reference frames on the convergence and the accuracy of the modal analysis of rotating beam structures having complex configurations are investigated.