• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.22-29
• /
• 1988

The reaction of methanol-water mixture to $CO_2$ and $H_2$ on alkaline earth metal-copper-zinc oxide has been studied in the temperature range of 150 ${\sim}\;300^{\circ}C$. Generally the addition of the alkaline earth metal to Cu/ZnO resulted in an enhancement of selectivity for $CO_2$ formation and a reduction of catalytic activity. Measurable activities were found from 150$^{\circ}C$, 200$^{\circ}C$, and 250$^{\circ}C$ on Mg/Cu/ZnO, Ca/Cu/ZnO, and Ba/Cu/ZnO respectively. However, the highest selectivity for $CO_2$ formation was observed in Ba/Cu/ZnO catalyst at 250$^{\circ}C$. The effect of alkaline earth metal or ZnO on the reactivity was investigated using temperature programmed desorption of $CO_2$ or temperature programmed reduction with $H_2$ over catalysts respectively. It was found that $CO_2$ interacts more strongly in the sequence of MgO < CaO < BaO and ZnO decereases the reduction temperature of CuO. From the results, it was suggested that ZnO activates $H_2$ in the redox process of Cu component and alkaline earth metals adsorbs $CO_2$ in the catalytic process.

• YAKHAK HOEJI
• /
• v.7 no.1
• /
• pp.26-29
• /
• 1963

Three systems such as CaS, BaS and ZnS are used as ground materials and transition elements such as Bi, Cu, Ag and Ni are used as activators to preared phosphorescent materials of strong after-grow intensity. These three systems in which we have 31 kinds of different composition samples are heated at given temperatures in the electrical furnace and are cooled in the air in order to crystallize them. In the case of BaS system, the mixture of CaO and purified S is better than the other kinds of calcium compound as the ground materials to crystallize phosphors. In BaS system, the mixture of BaCO$_{3}$ and purified S, in ZnS system ZnS respectively is the most proper ground material to prepare such a strong after-grow intensified phosphors. In a given range, the higher in temperature and the longer time of heating, the better phosphors we obtain.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.454-459
• /
• 2009

In this paper, we have performed an experimental study to simultaneously remove humic acid (RA) and heavy metals (Cu, Mn, and Zn) from the river water using potassium ferrate(VI), a multi-purpose and environment-friendly chemical. In the experiments for treating three 0.1 mM single heavy metals using 0.03${\sim}$0.7 mM (as Fe) ferrate, the removal efficiencies ranged 28${\sim}$99% for Cu, 22${\sim}$73% for Mn, and 18${\sim}$100% for Zn. In addition, humic acid and heavy metals could be very efficiently removed at the same time using 0.03${\sim}$0.7 mM (as Fe) ferrate: for example, 49${\sim}$81% (humic acid), 93${\sim}$100% (Cu), 22${\sim}$86% (Mn), and 20${\sim}$100% (Zn). The removal efficiencies of humic acid and heavy metals in the mixture of humic acid and heavy metals were higher than that in the solution of single humic acid or heavy metal. It can be explained by the fact that, before adding ferrate to the mixed solution, part of solutes were already removed by the complexation between the negatively-charged functional groups of humic acid and heavy metal cations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.519-528
• /
• 2003

A survey was conducted in certain parts of Haryana to record the prevalence of micro mineral deficiency in buffaloes. The prevalence of soil Cu, Co, Zn and Fe deficiency was 55.26%, 6.9%, 59.12% and 7.89% respectively. While that of fodder Cu, Co, Zn and Fe was 60.64%, 6.7%, 61.22% and 11.37% respectively. The overall prevalence of serum Cu, Co, Zn and Fe deficiency in Haryana was 59.2%, 19.1%, 59.2% and 19.9% respectively. The correlation co-efficient of Cu, Co, Zn and Fe in soil, fodder and serum was significant in most of the cases the values were above 0.8. Blood examination revealed significant decrease in haemoglobin and TEC level. However, no variation in level of TLC were observed in mineral deficient buffaloes. In micro mineral deficiency, thyroid hormone (T3 and T4) levels were decreased in buffaloes. Marginally lower concentration of vitamin A and E were observed in mineral deficient buffaloes in Haryana. The highest deficiency of micro minerals was 61.76% in copper at Ambala followed by 65.86% in zinc at Rhotak. For therapeutic studies a mineral mixture was prepared according to defiency obtained and fed to three groups of animals. Observation was recorded on 0, 15, 30, 45 and 60 days. Group A consist of normal healthy animals and group B mineral deficient animal untreated and group C mineral deficient animal, treated with prepared mineral mixture. 25 gram of mineral mixture was fed daily along with normal ration. There was increase in body weight, milk yield, haemoglobin concentration and total erythrocyte level in group C animals when compared to group B animals. The milk yield in group C animals increased to 6.970${\pm}$0.41 after 60th day of supplement in comparison to 0 day where it was 5.910${\pm}$0.37, similarly the body wt. of group C animals increased from 129.42${\pm}$01.13 (at 0 day) to 159.31${\pm}$03.61 at 60th day of treatment.

• Electrical & Electronic Materials
• /
• v.10 no.2
• /
• pp.150-155
• /
• 1997

Powder type electroluminescent device(P-ELD) in this study was prepared by printing method. P-ELDs were basically composed of phosphor, insulator and transparent conducting layer. The phosphor powder was prepared by sintering the mixture of ZnS as a host, Cu as an activator, and NaCl as a flux for co-activator and enhancement of growth of the phosphor particles. The phosphor layer was made by printing the paste of the cyanoethylpullan as a binder and the ZnS system phosphor powder. In order to evaluate the luminescence characteristics of ZnS P-ELD, applied voltage - luminance(V-L), frequency-luminance(f-L), and relative luminance spectra(L- .lambda.) characteristics were measured. The experimental results show that luminance increased with increasing the applied voltage and frequency. It can be explained in terms of the potential barrier formed between ZnS and CuS. Two emission peaks in luminance-wavelength spectra measured at applied voltage of 100 $V_{rms}$ were observed at 500nm as a primary peak and 460nm as a secondary peak, respectively.y.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.35-40
• /
• 2005

The oxidation of pure Sn and Sn-0.7Cu, Sn-3.5Ag, Sn-lZn, and Sn-9Zn alloys at $150^{\circ}C$ was investigated. Both the chemical nature and the amount of oxides were characterized using electrochemical reduction analysis by measuring the electrolytic reduction potential and total transferred electrical charges. X-ray photoelectron spectroscopy (XPS) was also conducted to support the results of reduction analysis. The effect of Cu, Ag and Zn addition on surface oxidation of Sn alloys is reported. For Sn, Sn-0.7Cu and Sn-3.5Ag, SnO grew first and then the mixture of SnO and $SnO_2$ was found. $SnO_2$ grew predominantly for a long-time aging. For Zn containing Sn alloys, both ZnO and $SnO_2$ were formed. Zn promotes the formation of $SnO_2$. Sn oxide growth rate of Pb-free solder alloys was also discussed in terms of alloying elements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.191.2-191.2
• /
• 2014

Cu/ZnO/$Al_2O_3$ is widely used methanol synthesis catalyst at elevated pressures P (50 to 100 bar) and temperatures T (473 to 573 K) using $CO_2$, CO, $H_2$ syngas mixture. Although Cu step and planar defects have been regarded as active sites in this catalyst, detailed $CO_2$ hydrogenation procedure has been still unknown and debated as well as initial intermediate. In this study, we investigated the mechanism of $CO_2$ hydrogenation on Cu(111) model surface at P (1 bar) and T (298 to 450 K) using reflection absorption infrared spectroscopy (RAIRS). Two distinct formates by hydrogenation of $CO_2$, on step and on terrace, show different behavior with elevating temperature. The peak intensity of on step formate was continuously decreased above 360 K up to 450K in contrast to the increase of on terrace formate. These phenomena are strong possibilities that the formate is initial intermediate and is desorbed by hydrogenation reaction because thermal desorption temperature of formate (~470 K) is much higher than desorption of on step formate. And the formate production peak of on step site was weakly correlated with CO formation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.271-274
• /
• 1999

In this paper, we studied the matrix type Powder AC Electroluminescence using ZnS:Cu,Cl Phosphor. Previously, Powder AC EL was used in Backlighting of LCD. Rescently, organic Thin Film EL was rapidly developed because of high Luminescence and low applied voltage. But Powder AC EL has Superior features that include sheet like flexibility thickness, low weight, self-emission, a wide viewing angle and a fast response time. We tried to change of phosphor thickness and binder mixture rate in order to obtain the good condition of powder AC EL and we obtained the very low breakdown voltage that was just 15V. Till now, we measured the current-voltage(V-I), luminance-voltage(V-L), Luminance-current (L-I), color coordinate (CIE), and phosphor Intensity of variable thickness. In experiment result, the devices has the luminance of 840 cd/$m^2$ and improved color coordinate, x=0.1557, y=0.2145, using a 10kHz drive frequency.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.226-232
• /
• 2019

The biological wastewater treatment is more eco-friendly and can be used effectively in wastewater for a variety of purposes than that of the conventional treatment. In particular, the wastewater treatment using microalgae in biological treatment processes has attracted great attention due to its ability to remove economically nutrients from wastewater and have many advantages as a renewable energy source. This study was investigated to establish the optimal growth conditions for microalga Scenedesmus obliquus. Additionally, the removal efficiencies of nutrients (N, P) and heavy metals (Cu, Zn) from the synthetic wastewater were evaluated. As a results, the optimal growth conditions were established at $28^{\circ}C$, pH 7, and light and dark cycle of 14 : 10 h. In the evaluation of nutrient removal efficiencies at each concentrations of 500, 1,000, 5,000, and 10,000 mg/L, the removal rates were 17.6~70% N and 8.4~34% P in the single treatment and 12.0~58.0% N and 3.0~40.3% P in the binary mixture treatment. In addition, the evaluation of heavy metal removal efficiencies at each concentrations of 10, 30 and 50 mg/L, the removal rates were 13.7~40.3% Cu and 10.0~30.0% Zn in the single treatment and 16.0~40.0% Cu and 12.0~20.0% Zn in the binary mixture treatment. Based on the results of the study, it appears that Scenedesmus obliquus can be used for the removal of nutrients and heavy metals from the swine wastewater.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.271-282
• /
• 2020

Sewage treatment plants are social infrastructure of cities. The sewage distribution rate in Korea is reaching 94% based on the sewage statistics based in the year of 2017. In Korean sewage treatment plants, use of PAC (Poly Aluminum Chloride) accounts for 58%. It contains a large amount of impurities (heavy metal) according to the quality standards, however, there have been insufficient efforts to reinforce the standards or technically improve the quality, which resulted in secondary pollution problems from injecting excessive coagulant. Also, the increase in the use of chemicals is leading to the increases in the annual amount of sewage sludge generated in 2017 and the need to reuse sludge. As such, this study aims to verify the possibility of reusing sludge by evaluating the stability of heavy metals based on the injection of coagulant mixture during water treatment which uses the torrefield wood powder and natural materials, and evaluating the sedimentation and heating value of sewage sludge. As a result of analyzing heavy metals (Cr, Fe, Zn, Cu, Cd, As, Pb, and Ni) from the coagulant mixture and PAC (10%), Cr, Cd, Pb, Ni, and Hg were not detected. As for Zn, while its concentration notified in the quality standards for drinking water is 3 mg/L, only a small amount of 0.007 mg/L was detected in the coagulant mixture. Maximum amounts of over double amounts of Fe, Cu, and As were found with PAC (10%) compared to the coagulant mixture. Also, an analysis of sludge sedimentation found that the coagulant mixture showed a better performance of up to double the speed of the conventional coagulant, PAC (10%). The dry-basis lower heating value of sewage sludge produced by injecting the coagulant mixture was 3,378 kcal/kg, while that of sewage sludge generated due to PAC (10%) was 3,171 kcal/kg; although both coagulants met the requirements to be used as auxiliary fuel at thermal power plants, the coagulant mixture developed in this study could secure heating values 200 kal/kg higher than the counterpart. Therefore, utilization of the coagulant mixture for water treatment rather than PAC (10%) is expected to be more environmentally stable and effective, as it helps generating sludge with better stability against heavy metals, having a faster sludge sedimentation, and higher heating value.