• Fibers and Polymers
• /
• 제6권3호
• /
• pp.229-234
• /
• 2005

In this paper, chitosan was suggested for using as a replacement for sodium alginate in the pretreatment print paste for digital ink-jet printing for cotton fabric. Pretreatment print pastes prepared from the mixture of chitosan and acetic acid with the appropriate viscosity gave satisfactory prints on the cotton fabric. Chitosan-treated cotton fabrics were digitally ink-jet printed with four different colors and the color fastness rating of the printed fabrics was satisfactory. Experimental results revealed the possibility of pre-treating the cotton with chitosan to replace the sodium alginate normally present in the pretreatment print paste recipe.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.225-232
• /
• 2019

The colorants of kale powders were optimally extracted using an 1:1 mixture solvent of ethanol and DMSO at 105℃ for 30 minutes obtaining a high yield of 359.7㎍/mL chlorophylls. Low color fastness of the dyed fabrics with the extracts, particularly against washing and solar radiation, can be overcome by the combined treatments of chitosan, heat setting and tannic acid. Washing fastness to color change was improved from rating 1-2 up to 5 due to the enhanced electrostatic interactions between the colorants and the positive glucosamine unit of the chitosan in the cationized cotton. In addition, the tannic acid treatment contributed to the additional increase in color fastness after the sequential treatments of chitosan pretreatment, dyeing and heat setting.

• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.53-62
• /
• 2014

This study examined the dyeability, color fastness and functionality of cotton fabrics dyed with residual parts of cultivated Pteridium aquilinum. UV-Vis absorption spectrum, TLC and FT-IR spectra analysis showed that colorants of Pteridium aquilinum are a mixture of pyrogallol tannin and catechol tannin. Optimum dyeing conditions was confirmed colorant concentration of 500% at $100^{\circ}C$ for 60 minutes. Color fastness followed to washing, rubbing, perspiration and light as 4-5, 5, 4-5(acidic), 3-4(alkaline) and 2, respectively. Deodorization rates of ammonia($NH_3$) and acetic acid ($CH_3COOH$) were analyzed 88.8% and 78.0%. UV protection rate was 94.2% of UV-A and 96.8% of UV-B. UV protection factor(UPF) was 27. Therefore residual parts of cultivated Pteridium aquilinum could be used for a new functional colorant.

• 한국염색가공학회지
• /
• 제2권3호
• /
• pp.51-58
• /
• 1990

Cotton fabrics were mercerized in ammonia water, sodium hydroxide and mixture of ammonia/sodium hydroxide, slack and under tension. X-ray and infrared spectra analyses were used to measure crystallinity of treated cottons. Changes due to swelling, which took place in the accessible regions were determined by moisture regain and dye adsorption. In addition to that crease recovery was compared mutually, and breaking strength-elongation compared, too. Both ammonia water and caustic treatments produced changes in morphology (swollen fibers, decrease in convolutions) and in fine structure of the cellulose (increase accessibility as measured by increased moisture regain, dye adsorption). X-ray diffraction showed partial recrystallization into cellulose III lattic after tension treatment with ammonia water. Both reagents produced increased cotton elongation-at-break with slack mercerization, increased cotton breaking strength with tension mercerization, and increased moisture regain or dye adsorption with slack mercerization.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.201-218
• /
• 2018

In this study, the effects of magnesium sulfate on the mechanical performance and the durability of confined and unconfined geopolymer concrete (GPC) specimens were investigated. The carbon and basalt fiber reinforced polymer (FRP) fabrics with 1-layer and 3-layers were used to evaluate the performances of the specimens under static and cyclic loading in the ambient and magnesium sulfate environments. In addition, the use of FRP materials as a rehabilitation technique was also studied. For the geopolymerization process of GPC specimens, the alkaline activator has selected a mixture of sodium silicate solution ($Na_2SiO_3$) and sodium hydroxide solution (NaOH) with a ratio ($Na_2SiO_3/NaOH$) of 2.5. In addition to GPC specimens, an ordinary concrete (NC) specimens were also produced as a reference specimens and some of the GPC and NC specimens were immersed in 5% magnesium sulfate solutions. The mechanical performance and the durability of the specimens were evaluated by visual appearance, weight change, static and cyclic loading, and failure modes of the specimens under magnesium sulfate and ambient environments. In addition, the microscopic changes of the specimens due to sulfate attack were also assessed by scanning electron microscopy (SEM) to understand the macroscale behavior of the specimens. Results indicated that geopolymer specimens produced with nano-silica and fly ash showed superior performance than the NC specimens in the sulfate environment. In addition, confined specimens with FRP fabrics significantly improved the compressive strength, ductility and durability resistance of the specimens and the improvement was found higher with the increased number of FRP layers. Specimens wrapped with carbon FRP fabrics showed better mechanical performance and durability properties than the specimens wrapped with basalt FRP fabrics. Both FRP materials can be used as a rehabilitation material in the sulfate environment.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.47-47
• /
• 2012

• 한국의류산업학회지
• /
• 제21권6호
• /
• pp.708-716
• /
• 2019

This study explored Jeju natural resources with healing function and tried mixed dyeing of Ecklonia cava and onion shell to improve dyeing. The results showed that silk dyed with a mixture of Ecklonia cava powder and onion shells rather than Jeju's individually dyed silk had better color power to develop fashion products. In addition, all friction lightning bolts, dry cleaning and sweat mining levels were excellent as well as excellent UV protection rates. The three baenaet jeogori worn during a birth anniversary and four rest suits that infants and children can wear comfortably maintained the dyeing and functioning of Ecklonia cava and onion shell mixture that was proven through abnormal experiments. For the three baenaet jeogori and two rest suits, the company has developed a fashion product recognized for high value-added merchandise using a variegation dyeing method made in a handmade style for expressing a person's natural sensibility through dyeing fabrics. Based on the results of the above research, it is expected that various fashion product developments will be possible by dyeing a mixture of functional and colorful extracts of the drug and colorful dye.

• 한국의류산업학회지
• /
• 제9권4호
• /
• pp.363-372
• /
• 2007

T-shirt has changed into advanced and stylish outwear by new paradigm, taste of consumer, awareness of recycling, spread of subculture, DIY culture, refusal of standardization and pursuit of high quality goods, etc. The purpose of this study was to analyze aesthetic characteristics of t-shirt designs that changed into diverse designs in world fashion college since 2000. The method of this study was to analyze documentaries, fashion magazines and internet fashion site. Aesthetic characteristics of t-shirt designs were expressed in deconstruction, mixture, integration and imitation. And each of external expressions and internal meanings was as follows: First, deconstruction was expressed in partial cutwork and three dimensional texture by sewing and construction drape. It means breaking the conventional structure and break-ing the boundary of t-shirt and another item and possibility of multi-vocal analysis. Second, mixture was expressed in collage of diverse ornaments, diverse fabrics and diverse patterns. It means exceeding the limit of material, elaboratenes and high quality of handwork, reflection of self-identity, brand image, fashion trend, consumer's psychology and mind of experimentation and couture. Third, integration was expressed in extension of length, width, use and style. It means unification of functions, deconstruction of items and extension of meanings and images. Forth, imitation was expressed in stain of dye, irregular and ripped sign, cut out, rough warp, drawing and washing, etc. It means subculture, rarity value, monopolization, diversity, familiarity, yearning and uniqueness.

• 한국의류산업학회지
• /
• 제15권5호
• /
• pp.808-814
• /
• 2013

In this study, The mixture of three kinds of pre-treatment agents, Carboxymethyl cellulose sodium salt(CMC), Sodium alginate and Dextrin, have been prepared for the better coloration of digital textile printing. To get sharpness of outline during digital printing process, the optimal formulation is the CMC and Sodium alginate mixture 1:1 ratio by volume. Cyan, Yellow, and Black colours are excellent on the Sodium alginate mixtures. But, Magenta is excellent in the CMC and Dextrin mixture. Sharpness and printability are closely related to viscosity of the mixture. The most optimal sharpness of outline achieved with a consideration of coloring, and field operations account for production when the viscosity of the mixed pre-treatment agent approximately is 10~13 cSt. Change in shade and staining of wash fastness for all the treated samples with the mixtures rated 4-5 grade. Both dry rubbing fastness to shade change and staining are good in the treated samples, whereas wet rubbing fastness rated 2-3 grade. To improve wet rubbing fastness, the Sodium alginate and Dextrine mixture, which rated 3-4 grade for Black color, is applicable. With exception of 3 rating to black color, Light fastness is 4 rating for the remaining three colors in the regardless of treatment condition and mixing of the pre-treatment agent. Dry cleaning fastness of all samples are also 4-5 rating.