• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.393-407
• /
• 2019

본 연구에서는 Bacilluls subtilis가 함유된 목질계 인공토양(피트모스:펄라이트:폭쇄처리된 참나무:미생물제형=3:1:3:3, w/w/w/w)을 제조 하였으며, 이를 대조구토양과 0%, 25%, 50%, 75% 및 100% 비율로 혼합하여 참싸리 종자 파종 후 소규모 야외포트 현장적용 하였다. 현장적용에 따른 대조구토양, 혼합토양(대조구토양+인공토양) 및 인공토양의 물리 화학적 특성을 분석하였고 참싸리 줄기 및 뿌리생장을 비교하였다. 혼합토양에서는 $0.04g/cm^3$ 이하의 용적밀도, 85 % 이상의 공극률, pH 4.3 - 4.7, 0.5 dS/m 이하의 전기전도도, 15.0 - 26.5의 탄질비, 23.6% - 43.2%의 유기물 함량 및 $157{\times}10^6CFU/g-624{\times}10^6CFU/g$의 미생물밀도를 나타냈다. 인공토양이 25% 및 50% 함유된 혼합토양에서는 참싸리 줄기 및 뿌리생장이 대조구토양보다 높게 나타났고 참싸리의 생장에 영향을 미치는 토양 인자는 용적밀도, 공극률, 수분보유력, 탄질비, 유기물함량 및 미생물함량으로 나타났다.

• 한국지반공학회논문집
• /
• 제20권8호
• /
• pp.159-166
• /
• 2004

본 연구에서는 불포화 지반의 특성을 파악하고, 강우시 불포화 사면의 포화깊이에 따른 안정성을 파악하기 위해 국내 지반의 전형적인 화강풍화토(SW)에 점토(CH) 함유량 0∼30%을 변화시켜 가며 함수특성곡선 산정 실험을 수행하였다. 또한 강우로 인해 증가되는 포화깊이에 영향을 미치는 투수계수 및 suction을 구하기 위해 다짐도에 따른 강도정수 변화를 측정하였다. 침투로 인해 발생하는 지반내의 suction 변화를 점토함유량에 따라 모형 시험과 수치해석을 사용하여 분석하였다. 특히 불포화 지반에서 포화지반으로 바뀌는 과정에 잔류하는 wetting front suction은 점토함유량과 지반의 다짐도에 따라 민감하게 변화하였다. 강우시 침투수의 거동을 파악하기 위해 상용프로그램인 SEEP/W를 통해 침투해석을 수행하였고, 침투해석 결과를 연동시켜 포화깊이에 따른 사면의 안정성을 SLOPE/W 프로그램을 이용하여 포화깊이 및 점토함유량에 따라 비교ㆍ분석하였다. 해석결과를 통해 wetting front suction은 초기 포화깊이에 영향을 미치며 안전율이 변하는 것을 알 수 있다.

• KSBB Journal
• /
• 제14권5호
• /
• pp.633-637
• /
• 1999

초임계 유체 이산화탄소를 이용하여 그 온도와 밀도가 물고기 기름의 구성성분인 각종 지방산 에스터의 분배계수에 미치는 영향을 규명하였다. 각 지방산 에스터의 분배계수는 초임계 유체의 온도와 밀도에 따라서 상당한 차이를 나타내어 이산화탄소유체에 의한 지방산의 초임계 유체 추출분리 가능성을 확인할 수 있었다. 각 지방산의 분배계수 차이가 크게 나타나는 초임계 유체의 밀도는 0.3 g/mL 내지 0.4 /mL사이의 범위에 분포되어 있었다. 또한 각 지방산은 모두 초임계 유체의 밀도가 낮은 쪽보다 높은 쪽에서 온도에 따른 역행응축현상을 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.213-216
• /
• 2014

The microstructure and varistor properties of ZPCCAE ($ZnO-Pr_6O_{11}-CoO-Cr_2O_3-Al_2O_3-Er_2O_3$) ceramics were investigated with different erbium amounts. Analysis of the microstructure indicated that the ceramics consisted of ZnO grains as a bulk phase, and intergranular layers (mixture of $Pr_6O_{11}$ and $Er_2O_3$) as a minor secondary phase. With the increase of the doped erbium amount, the densities of sintered pellets increased from 5.63 to $5.82g/cm^3$, and the average grain size decreased from 9.0 to $5.7{\mu}m$. The increase of the doped erbium amount increased the breakdown field from 2,649 to 5,074 V/cm, and the nonlinear coefficient from 27.6 to 39.1. It was found that in the range of 0.25 to 0.5 mol%, the doped erbium had little effect on the microstructure and electrical properties.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.183-188
• /
• 2010

$Ce_{0.8}Gd_{0.2}O_{1.9}$(GDC20) powder was synthesized by milling of $CeO_2$ slurry and Gd oxalate precipitation. The mixture of $CeO_2$ powder and Gd precipitates calcined at $600^{\circ}C$ for 2 h showed the particle size distribution similar to that of $CeO_2$ powder, which had been milled during the synthesis process. Attrition milling of the calcined powder with an average particle size of $0.36\;{\mu}m$ for 2 h resulted in a decrease in the particle size to $0.24\;{\mu}m$. Although the milled powder consisted of small particles(<$1\;{\mu}m$), a small amount of fine platy $Gd_2O_3$ particles, which had been survived in the milling process, was observed. Sintering of the powder compacts for 4 h showed relative densities of 80.7% at $1300^{\circ}C$ and 97% at $1400^{\circ}C$, respectively. Densification was found to almost complete at $1500^{\circ}C$, resulting in a dense and homogeneous microstructure with a relative density of 99.5%.

• Advances in materials Research
• /
• 제7권1호
• /
• pp.73-81
• /
• 2018

$TiO_2/CH_3NH_3Pb_{1-x}Sb_xI_{3-3x}Br_{3x}-based$ photovoltaic devices were fabricated by a spin-coating method using mixture solutions with $SbBr_3$. Effects of $SbBr3$, CsI or RbBr addition to $CH_3NH_3PbI_3$ precursor solutions on the photovoltaic properties where investigated. The short-circuit current densities and photoconversion efficiencies were improved by adding a small amount of $SbBr_3$, CsI or RbBr to the perovskite phase, which would be due to the doping effect of Sb, Br and Cs/Rb atom at the Pb, I and $CH_3NH3$ sites, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.565-567
• /
• 2000

In this paper, the discharge characteristics of AC PDP, one of the leading technologies currently under development for large-area flat displays, is computed by using Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. Up to now, many simulations of AC PDP have been mainly done by Finite Difference Method(FDM). But we simulated the AC PDP by using FEM-FCT method which discretizes the region of interest with unstructured grids. FEM-FCT method can reduce the computational cost because of refining locally where the physical quantities have steep gradients and is more efficient in solving discharge problems, such as a AC PDP. Results are presented in Ne-Xe(4%) gas mixture for a gas pressure of 400 Torr and as the discharge proceeds, the space and time variations of the electron and ion densities, potential and wall charges on the dielectric are described. Results from our simulation by FEM-FCT are similar to those from simulation by FDM and are more efficient in computational cost reduction.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.138-144
• /
• 2016

The discharge characteristics of pulse-driven coplanar micro barrier discharges for an ultraviolet (UV) light source using Ne-Xe mixture have been investigated using a two-dimensional fluid simulation at near-atmospheric pressure. The densities of electrons, the radiative excited states, the metastable excited states, and the power loss are investigated with the variations of gas pressure and the gap distance. With a fixed gap distance, the number of the radiative states $Xe^*(^3P_1)$ increases with the increasing driving voltage, but this number shows weak dependency on the gas when that pressure is over 400 Torr. However, the number of the radiative states increases with the increase of the gap distance at a fixed voltage, while the power loss decreases. Therefore, a long gap discharge has higher efficiency for UV generation than does a short gap discharge. A slight change in the electrode tilt angle enhances the number of radiative species 2 or 3 times with the same operation conditions. Therefore, the intensity and efficiency of the UV light source can be controlled independently by changing the gap distance and the electrode structure.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.704-712
• /
• 1988

In order to investigate the effect of the second phase on Al2O3 matrix, SiC whisker was dispersed in Al2O3 matrix as a second phase over the content range of 5vol% to 20vol%. To this mixture, Y2O3 or TiO2 powder was added as a sintering additive before isostatically pressing and pressureless sintering at 1800-190$0^{\circ}C$ for 90min in N2 atmosphere. With increasing SiC whisker content, relative densities of composites were decreased and the grain growth of Al2O3 was restricted. When Y2O3 was added as a sintering aid the sintering temperature was 180$0^{\circ}C$, the maximum values of flexural strength, hardness and fracture toughness were 537MPa, 12.1GPa, 3.7MPa.m1/2, respectively. However, when the sintering temperature was elevated to 190$0^{\circ}C$, maximum values of flexural strength, hardness and fracture toughness were 453MPa, 17.5GPa, 4.9MPa.m1/2, respectively. Improved mechanical properties are assumed to be attributed to the crack deflection by the second phase SiC whisker and whisker pullout mechanism.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.436-442
• /
• 2002

Recently color AC PDP(plasma display panel) technology is rapidly improved. However, the luminous efficiency improvement is a key issue for making plasma display into a large-area flat display. In this paper, we suggest a new concentration of Xe in He-Ne-Xe gas mixture in order to achieve a high luminous efficiency of color AC PDPs. We calculated the densities of 25 species as a function of the time zero dimensional simulation using CVODE solver and we compared the results of zero dimensional simulation with a measurement of photo wave brightness and luminous efficiency, in order to find the optimum mixing condition of He-Ne-Xe gas in color plasma display panel. We obtained a high discharge speed under Xe mixing ratio of 1% by simulation and confirmed that through measuring photo wave.