• Journal of the Korean Ceramic Society
• /
• v.42 no.5 s.276
• /
• pp.319-325
• /
• 2005

[ $LiNiO_2$ ] was synthesized by the solid-state method after mixing $LiOH{\cdot}H_2O$ and $Ni(OH)_2$ with SPEX mill. The optimum condition for the synthesis of $LiNiO_2$ was the calcination at $750^{\circ}C$ for 30h in $O_2$ stream after milling for 1 h. The $LiNiO_2$ synthesized under this condition showed relatively large value of $I_{003}/I_{104}$ and relatively small value of R-factor. When $LiNiO_2$ was cycled in 2.7$\~$4.15 V at 0.1C-rate, the first discharge capacity was not very large (145.8 mAh/g) but it showed good cycling performance. When $LiNiO_2$ was cycled in 2.7$\~$4.2 V at 0.1C-rate, the first discharge capacity was large but ,it showed poor cycling performance probably because of the transition of H2 hexagonal structure to H3 hexagonal structure. In addition, when $LiNiO_2$ was cycled in 1.0$\~$4.8 V at 1/24C- rate, the first discharge capacity was very large (257.7 mAh/g) and the discharge capacity increased with the number of cycles.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.

• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.96-99
• /
• 1975

In order to establish an optimal flour milling method for naked barley, the tempering conditions, milling after pearling and mixed flour milling of naked barley with wheat were studied, and the following results were obtained. 1. For the tempering of naked barley, treatment for 48 hours at a moisture level of 13. 5% and addition of 0. 5% water prior to the flour milling is the most useful procedure. 2. The pearling of naked barley before or after tempering lowers the ash content in the flour, but the yield is reduced considerably and two steps of processing make the procedure unsuitable. 3. For the mixed flour milling, the mixing ratio of naked barley to wheat ranging from 10 : 90 to 20 : 80 is optimal.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.299-302
• /
• 2011

[ $WO_3$ ]powders were ball-milled with an alumina ball for 0-72 hours. $In_2O_3$ doped $WO_3$ was prepared by soaking ball-milled $WO_3$ in an $InCl_3$ solution. The mixed powder was annealed at $700^{\circ}C$ for 30 min in an air atmosphere. A paste for screen-printing the thick film was prepared by mixing the $WO_3$:In2O3 powders with ${\alpha}$-terpinol and glycerol. $In_2O_3$ doped $WO_3$ thick films were fabricated into a gas sensor by a screen-printing method on alumina substrates. The structural properties of the $WO_3$:$InO_3$ thick films were a monoclinic phase with a (002) dominant orientation. The particle size of the $WO_3$:$InO_3$ decreased with the ball-milling time. The sensing characteristics of the $In_2O_3$ doped $WO_3$ were investigated by measuring the electrical resistance of each sensor in the test-box. The highest sensitivity to 5 ppm $CH_4$ gas and 5 ppm $CH_3CH_2CH_3$ gas was observed in the ball-milled $WO_3$:$InO_3$ gas sensors at 48 hours. The response time of $WO_3$:$In_2O_3$ gas sensors was 7 seconds and recovery time was 9 seconds for the methane gas.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.114-122
• /
• 2001

The purpose of this study was to manufacture sintered lightweight aggregate using paper sludge ash and to evaluate the qualities of the aggregate according to various mix proportions, conditions of pelletization and sintering. The paper sludge ash alone, due to its mineral and chemical compositions could not gain suitable expansion and strength. Hence, it was essential to add mineral additives such as clay, fly ash etc. The optimum muting ratio range determined in this study is as follows , paper sludge ash 30∼50 %, clay 30∼50 %, fay ash 0∼40 %, Paper sludge 0∼10% and hematite 2∼3 %(for manufacturing lightweight aggregate both for non-structural and structural concrete). It was possible to manufacture various lightweight aggregate whose dry specific gravity ranged about from 0.6 to 1.4 by using this optimum mixing ratio. From the test results of the qualities of aggregate, it showed that the 10% granules crushing value test and water absorption percentage ranged about 5∼10 ton and 10∼20%. Thus, it was favorably comparable to those of the imported aggregate. The manufactured lightweight aggregate could be used for structural concrete and non-structural concrete.

• Journal of Bio-Environment Control
• /
• v.2 no.1
• /
• pp.37-45
• /
• 1993

The purpose of this research was to develop ideal substrates for the production of good quality tomatoes in bag culture system and also to improve media with low or no environmental pollution by blending and mixing artificial substrate including peatmoss, perlite, vermiculite, granular rockwool, polyphenol resin foam, bark, and smoked rice hull. The highly efficient media proved by experiments were vermiculite, smoked rice hull, polyphenol resin foam, granular rockwool, and perlite, which showed good results in the early growth as well as the marketable yield of tomato in the bag culture. Tomato plants grown in the media mixed with peatmoss, vermiculite and granular rockwool at the ratio of 3 : 1 : 1(by volume) showed the highest marketable yield, and the next at the ratio of 2 : 1 : 1. The perlite-granular rockwool mixtures at the ratio of 2 : 3 and 1 : 4, and the peatmoss vermiculite mixtures at the ratio of 2 : 3 and 3 : 2, seemed to be promising media for bag culture.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.252-259
• /
• 2006

A new route for making rubber/clay nanocomposites was suggested based on skim natural rubber latex (SNRL), which is a protein rich by-product obtained during the centrifugal concentration of natural rubber (NR) latex. NR/acrylonitrile butadiene rubber (NBR) based nanocomposites were prepared from SNRL and NBR latex of 26 % acrylonitrile content by blending of aqueous dispersion of organoclay (OC) followed by coagulation, drying, mill mixing and vulcanization. X-ray diffraction(XRD) studies revealed that NR/NBR blend nanocomposites exhibited a highly intercalated and exfoliated structure, especially for NBR-rich blends. Dynamic mechanical studies showed that more compatible behavior was observed for NBR-rich blends. The 25/75 NR/NBR blend nanocomposite showed the best mechanical properties.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.17-24
• /
• 2022

This work examined the effect of mixing transition metal-based additives [FeCl₃, Fe-containing paper mill sludge (PMS), CoCl₂·H₂O, ZrO₂, and α-Fe₂O₃] on the thermochemical conversion of coffee waste (CW) in carbon dioxide-assisted pyrolysis process. Compared to the generation amounts of syngas (0.7 mole% H₂ & 3.0 mole% CO) at 700℃ from single pyrolysis of CW, co-pyrolysis in the presence of Fe- or Zr-based additives resulted in the enhanced production of syngas, with the measured concentrations of H₂ and CO ranging 1.1-3.4 mole% and 4.6-13.2 mole% at the same temperature, respectively. In addition, α-Fe₂O₃ biochar possessed the adsorption capacity of As(V) (19.3 mg g^-1) comparable to that of ZrO₂-biochar (21.2 mg g^-1). In conclusion, solid-type Fe-based additive can be highly considered as an efficient catalyst to simultaneously produce syngas (H₂ & CO) as fuel energy resource and metal-biochar as sorbent.

• Journal of Korean Medical classics
• /
• v.12 no.2
• /
• pp.56-71
• /
• 1999

1. In the recohnition of cosmos true form, It is compared to the Boundless(無極) the Great Absolute(太極),Yin and Yang(兩儀) throungh the fertilazation process of spermatozoon and ovum. 2. It is explained that principle of unchange through the Form and Action(體 用) relation of the outer appearances and Number (象數) with matching the number of nine and ten to HaDoo(河圖) and RakSye(洛書). 3. Eigth divinations(八卦) being compared to the human body, Care presevation of pregnancy(養胎) is explained that head forms firstly(Gun-I 1乾一), secondly lung(Tae-E 兌二), heart(E-Sam 離三), liver(Jin-Sa 震四), gall bladder(Son-Oo 巽五), kidney(Gam-Yuk 坎六), intestines and stomach(Gan-Chill 艮七), lastly flesh forms(Gon-Pal 坤八). 4. It is explained that process of physiological change of $\ll$Nei Ching The Natural Truth in Ancient Times$\gg$(內經 上古天眞論) by matching boy at the age of 8 to Gan-divination(艮卦), and girl at the age of 7 to Tae-divination(兌卦). 5. The theory of six sons from Gun-Gon(乾坤六子論) is explained by relation of Apriority Eight-divination(先天八卦) obedience and disobedience-left and right. 6. It is explained that form of the human-body and the relationship of the Heart - the Kidney through the Gam(坎) Li(離) - divination 7. The effort of interpretating time and space of the Twelve Horary signs is explanined by season, direction, Five elements(五行), rise and decline, the Three Sum(三合), the Six Sum (六合), the six crash(六衡)'s relation. 8. the process of change from apriority(先天) to postery(後天) in the book of Changes(周易) is explanined by comparing to the phenomenum of nature and the human body. 9. The Energy Satus(氣位) are different from the direction of Eight-divination(八卦) and the properties of the good or bad of herb-drugs are differnt from the place of production. 10. The rightness of realizating the Overlapping-divinations(重卦) are compared to the phenomenum of nature through the Divination Virture(卦德). 11. The dependence-relations of The Twelve Meridians(十二經脈) are explained by-matching January with liver meridian, February with gall bladder meridian, march with heart pericardium meridiam, April with small intestine meridkan, August with lung spleen meridian, jury with stomach meridian, August with lung meridian, September with large intestine meridian, October with urinary bladder meridianm November with kidney meridian. December with triple energizer meridian throng The Twelve Byuk-divination. 12. The process of menstration cycle is explained by The Month symbolizing-divination(月候卦). 13. Through The Trade(交易) prove the reason of feverish sympotoms to use feverish Drug, mill sympotoms to use mill drug of prescription and Heart-Kidneys Consensus(心賢相交) and through The Change(變易), prove the chill and feverish consensus of forechill after feverish, fore feverish after chill and through. The Non-Change(不易) explain the reason of chill sympotoms to use feverish drug, feverish sympotoms to use chill drug of prscription. 14. Ho-divination(互卦) applicate Jxa Sa(佐使) herb drug match of Kun Sin Jwa Sa() theory. 15. According to the Hyo-position(爻位) match the ages, body form and drug by matching Ehight-divination(八卦) to the human body form and function in medicine and the book of Changes(周易) application emphasize the human body Ehight-divination(人身八卦). 16. Throgh the Order-divination(序卦) explain the rightness of Divination Image(卦象) arrangement and all things take shape by cosmo-energy conseusus(宇宙氣交). 17. Throgh the Mixing-divination(難卦) supply the vacancy of medicine and the book of Changes(周易) relationship in the foreword explian the human energy movements, sleep, vomitting, the energy arrival(逮氣), heart pericardium(心包), lung membrane(肺膜) etc.... Like the above sentence medicine and the book of Changes(周易) theory of scholar Tang on the viewpoint of easten-the way Western appliance(東道西器) researching abyss of medicine impart to descendants, so I think that the achievement of medicine and the book of Changes(周易) study is very excellant and I expect that the study Korean Oriental Medicine(韓醫學) theory by means of medicine the book of Changes(周易) reference, will be accelarated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.170-177
• /
• 1997

Two experiments were conducted to evaluate the effects of different extrusion conditions of corn and soybean meal on physico-chemical properties, ileal digestibility of amino acid and growth performance in weaned pigs. In Expt. 1, to compare physico-chemical properties and ileal digestibility of extruded corn and soybean meal, ground corn (2 mm screen) and soybean meal were separately extruded in four different conditions: (1) no preconditioning, low water supply (3.0 l/min) (NCLW), (2) no preconditioning, high water supply (7.0 l/min) (NCHW). (3) preconditioning (steam 3.0 l/min) with low water supply (3.0 l/min) (CLW), and (4) preconditioning (steam 3.0 l/min) plus high water supply (7.0 l/min) (CHW). Twenty-five cannulated pigs ($L{\times}Y{\times}D$, 7.62 kg BW for soybean meal, 8.80 kg BW for corn) were employed to determine nutrients digestibility of the extruded feedstuffs. In Expt. 2, a total of 90 pogs ($L{\times}Y{\times}D$, 9.18 kg BW) were used for a 28 d feeding trial to compare growth performance of pigs as affected by different extrusion conditions. Before mixing, corn and soybean meal were blended and extruded by the same conditions as described in Expt. 1. corn extruded with NCLW showed the highest (p < 0.05) degree of gelatinization (DG), compared to the lowest values observed for NCHW. Extrusion of corn with preconditioning (CLW and CHW) increased (p < 0.05) the DG as compared to the extrusion condition of NCHW. Extruded SBM with NCLW showed the lowest (p < 0.05) degree of texturization among treatments. The ileal digestibility of GE in SBM was higher with NCHW and CHW as compared to NCLW. The ileal digestibility of CP was lower in extruded corn, but was higher in extruded SBM, compared to untreated sample. Lysine digestibility of extruded corn (except corn with NCHW) was in general significantly improved. Extrusion of SBM resulted in no improvements in ileal digestibility of amino acids, but extruded SBM with NCLW had lower lysine digestibility compared to other treatments. In growth responses, pigs fed a diet with CLW had higher, but not significant, average daily gain (ADG) than other treatments during first 2 weeks. From d 15 to 28, pigs fed a diet with CHW had significantly less (p < 0.05) average daily feed intake (ADFI) than others except NCHW. In conclusion, the proper extrusion condition for corn and SBM in terms of ileal digestibility of amino acids and growth performance of weaning pigs seems to be the combination of preconditioning and a low water supply (3.0 l/min).