• Korean Journal of Pharmacognosy
• /
• v.12 no.1
• /
• pp.31-43
• /
• 1981

In order to determine the effect of Oryeongsan reputed to have diuretic action since Han Dynasty and possible synergetic action of Dianthi Semen, Polygonum avicularis Herba, Kochiae Fructus and Akebiae Lignum, herbs with similar reputation, when added to the above prescription, their decoction powders were solved into distilled water and injected into rabbits through the ear vein. Upon the treatment, the excretion of sodium, potassium and chloride ion together with urine volume was kinetically determined. At the same time the clearance of plasma creatinine and sodium ion was determined and the following results were obtained. Every experimental group demonstrated diuretic action, though feable, of relatively long duration. The diuretic mechanism in the case of Oryeongsan made up by mixing the seperate extracts of individual components and Oryeongsan(A) plus Dianthi Semen was found to be inhibitory effect of renal tubular reabsorption in contrast to the case of Oryeongsan(A) plus Polygonum avicularis Herba, Kochiae Fructus or Akebiae Lignum in which case the diuretic mechanism was found to be glomerular vascular dilatation. The urinary excretion of potassium ion was increased in the case of Oryeongsan(A) plus Dianthi Semen, Kochiae Fructus of Akebiae Lignum whereas in the other cases no similar change was registered. The diuretic action was most remarkable in the case of Oryeongsan(A) plus Polygonum avicularis Herba followed by Oryeongsan(A) plus Kochiae Fructus, Oryeongsan(A) plus Dianthi Semen, extract mixture of individual component of Oryeongsan, Oryeongsan(A) and Oryeongsan(A) plus Akebiae Lignum decreasing order. The duration of diuretic action was found to be 90 minutes in the case of Oryeongsan and mixture of individual component of Oryeongsan, and 60 minutes in the case of Oryeongsan(A) plus Dianthi Semen, Kochiae Fructus or Akebiae Lignum in contrast to the case of Oryeongsan(A) plus Polygonum avicularis Herba which lasted up to 120 minutes.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.149-157
• /
• 2012

Experiments for As(V) removal using synthesized $Ca{\cdot}Al$-monosulfate was performed from the water contaminated with arsenate. Monosulfate is known as LDHs (Layered Double Hydroxides) which is one of the anionic clay minerals. Monosulfate was synthesized mixing $C_3A$ (tricalcium aluminate), gypsum (calcium sulfate), and water with an intercalation method. The product form the synthesis was characterized by FE-SEM, WDXRF, PXRD, and FT-IR. Experiments with different doses of monosulfate were carried out for kinetic. As a result of experiment, the concentration of As(V) was reduced from 0.67 mM to 0.19 mM (0.67mM of monosulfate) and 0.178 mM (1.34 mM of monosulfate). The concentration of sulfate was increased with As(V) decrease. The result of PXRD showed that the d-spacing of inter layer ($d_{003}$ peak) was shifted from 8.927 ${\AA}$ to 8.095 ${\AA}$ because the sulfate in the inter layer of monosulfate was exchanged arsenate with water molecules bonded. From the FT-IR results, a new single band (800 cm-1) was observed after the reaction of monosulfate and As(V). The arsenic removal can be regarded as anion exchange mechanism that is one of the characteristics of LDHs from the results of PXRD and FT-IR analysis.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.275-285
• /
• 2008

The floc formation, breakage and reformation of humic acid by inorganic (alum and PAC) and organic coagulants (cationic polyelectrolytes) at several conditions (pH, ionic strength and floc breakage time) were examined and compared among the coagulants at different conditions using a continuous optical monitoring method, with controlled mixing and stirring conditions. For alum, the shapes of formation, breakage and reformation curves at different pH (5 and 7) were different, but the shapes and the sizes of initial floc and reformed floc were nearly the same in the absence and presence of electrolytes at pH 7. For PAC, similar shapes of the curves were obtained at different pH and ionic strength, but the sizes were different, except for those of reformed flocs at different pH. However, for these coagulants, reformed flocs after floc breakage, occurred irreversibly for all the conditions used in this study. For organic coagulants, the time to attain the initial plateau floc size, the extent of floc strength at high shear rate and reversibility of reformed floes were different, depending floc formation mechanism. Especially, for the cationic polyelectrolyte forming humic flocs by charge neutralization or electrostatic patch effect mechanism, reformed flocs occurred reversibly, regardless of pH and floc breakage time, but occurred irreversibly in the presence of electrolytes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.1
• /
• pp.43-46
• /
• 1979

Curing the studies on the mechanism of the nodule formation and the infection of rhizobia using the continously cultured plant cell tissues, it was found that some calluses possess high nitrogen fixation activity. This experiment was conducted to know the differences among the calluses and the Rhizobia. The results obtained were as follows; 1) In a single inoculation the nitrogenase activity of soybean cell cultures-rhizobium was moderately higher than non-leguminous cell cultures, however, in the mixing inoculation that was reversely found. 2) Host factor, which was characteristics for the nodule formation and the nitrogenase activity, was not appeared generally in the plant cell cultures except for Kuamusume and Toyozuzu in soybean, and Datura in non-leguminous cell cultures. 3) In the 012 rhizoblium cultured on soybean cell cultures and in the 010, 023 and 024 rhizobia cultured on non-leguminous cell cultures the nitrogenase activity higher than the others.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1209-1219
• /
• 2003

The dynamic behaviors of the single vortex interacting with $CH_4-Air$ jet diffusion flame are investigated numerically. The numerical method is based on a predict-corrector scheme for a low Mach number flow. A two-step global reaction mechanism is adopted as a combustion model. Studies are conducted in fixed initial velocities for the three cases according as where $CO_2$ is added; (1) without dilution, (2) dilution in fuel stream and (3) dilution in oxidizer stream. A single vortex is generated by an axisymmetric jet, which is made by an impulse of a cold fuel when a flame is developed entirely in a computational domain. The simulation shows that $CO_2$ dilution in fuel stream results in somewhat larger vortex radius, and greater amount of entrainment of surrounding fluid than in other cases. Thus, the dilution of $CO_2$ in fuel stream enhances the mixing in single vortex and increases the stretching of the flame surface. The budgets of the vorticity transport equation are examined to reveal the mechanism of vortex formation when $CO_2$ is added. It is found that, in the case of $CO_2$ dilution in fuel stream, the vortex destruction due to volumetric expansion and the vortex production due to baroclinic torque are more dominant than in other cases.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.107-113
• /
• 1993

Small rectangular explosion chamber of its size 25cmX25cmX32cm with a circular bursting diaphram at the top was used to study the mechanism of gas explosion to fire transition phenomena, the process of ignition of solid combustibles during a gas explosion. To visulize the explosion to fire transition phenomena, transparent acryl window and high speed camera system were used. The test piece of solid combustible in this experiments was a 5cm$\times$5cm square sheet of newspaper which was placed in the explosion chamber filled with a LPG-air mixture. The mixture was ignited by an electric spark at the center of the chamber. Explosion to fire transition phenomena and the behavior of out flow and in flow of gas through the opening yielded by bursting the diaphram was visualized with shlieren system and without shlieren system. Diameter of a bursting dlaphram at the top of the explosion chamber was varied 5cm, 10cm, and 15cm, and the position of test piece were varied with 6 point. Explosion pressure was measured with strain type pressure transducer, and the weight difference of the test piece before and after each experimental run was measured. By comparing the weight difference of solid combustibles before and after the experiment and the behavior of out flow and inflow of gas after explosion, it was found that the possibility of ignition was depends on the LPG-air mixture concentration and the exposure period of test piece to the burnt gas. Test result of this experiments it was found that the main factor of this phenomena are that heat transfer to the test piece, and the pyrolysis reaction of test piece. Based on the results, the mechanism of the explosion to fire transition phenomena were inferred ; gas explosion- heat transfer to solid combustibiles ; pyrolysis reaction of solid combutibles : air inflow ; mixing of the pyroly gas with air ignition.

• Atmosphere
• /
• v.31 no.2
• /
• pp.199-214
• /
• 2021

A record-breaking high surface air temperature of 41.0℃ was observed on 1 August 2018 at Hongcheon, South Korea. In this study, to quantitatively determine the formation mechanism of this extremely high surface air temperature, particularly considering the contributions of the foehn and the foehnlike wind, observational data from Korea Meteorological Administration (KMA) and the Weather Research and Forecasting (WRF) model were utilized. In the backward trajectory analysis, trajectories of 100 air parcels were released from the surface over Hongcheon at 1600 LST on 1 August 2018. Among them, the 47 trajectories (38 trajectories) are tracked back above (below) heights of 1.4 km above mean sea level at 0900 LST 31 July 2018 and are defined as upper (lower) routes. Lagrangian energy budget analysis shows that for the upper routes, adiabatic heating (11.886 × 10³ J kg^-1) accounts for about 77% of the increase in the thermal energy transfer to the air parcels, while the rest (23%) is diabatic heating (3.650 × 10³ J kg^-1). On the other hand, for the lower routes, adiabatic heating (6.111 × 10³ J kg^-1) accounts for about 49% of the increase, the rest (51%) being diabatic heating (6.295 × 10³ J kg^-1). Even though the contribution of the diabatic heating to the increase in the air temperature rather varies according to the routes, the contribution of the diabatic heating should be considered. The diabatic heating is caused by direct heating associated with surface sensible heat flux and heating associated with the turbulent mixing. This mechanism is the Type 4 foehn described in Takane and Kusaka (2011). It is concluded that Type 4 foehn wind occurs and plays an important role in the extreme event on 1 August 2018.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.189-193
• /
• 2008

In this study, we carried out an investigation of the etching characteristics (etch rate, selectivity to $SiO_2$ and $HfO_2$) of TiN thin films in the $CH_4$/Ar inductively coupled plasma. The maximum etch rate of $274\;{\AA}/min$ for TiN thin films was obtained at $CH_4$(80%)/Ar(20%) gas mixing ratio. At the same time, the etch rate was measured as function of the etching parameters such as RF power, Bias power, and process pressure. The X-ray photoelectron spectroscopy analysis showed an efficient destruction of the oxide bonds by the ion bombardment as well as showed an accumulation of low volatile reaction products on the etched surface. Based on these data, the ion-assisted chemical reaction was proposed as the main etch mechanism for the $CH_4$ containing plasmas.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.263-270
• /
• 2009

The effect of photoelectrocatalytic (PEC) degradation for different dyes with the CNT/$TiO_2$ electrode was studied. The prepared electrode was characterized with surface properties, structural crystallinity, elemental identification, and PEC activity. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine CNT. This indicated the blocking of micropores on the surface of CNT, which was further supported by observation via FESEM. XRD patterns of the composites showed that the CNT/$TiO_2$ composite contained a mixing anatase and rutile phase. EDX spectra showed the presence of C, O and Ti peaks for all samples. The decomposition efifciency of the prepared electrode was evaluated by the PEC degradation of three dyes (methylene blue (MB), rhodamine B (RH.B), methyl orange (MO)). The variations of the FT-IR spectra and pH value of dye solutions were measured during the PEC system; it was found that the CNT/$TiO_2$ electrode has better PEC degradation for MB solution than that of RH.B and MO. The proposed degradation mechanism was present.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.139-141
• /
• 2013

In respect of environmental hazard or human safety, the use of the chloride-based packaging materials like polyvinyl chloride (PVC) blister and film, Polyvinylidene chloride (PVDC) laminated film has been restricted with national regulations. In this study, I intended to develope the reagent solution for identifying the chloride-based packaging materials, so that it was made by mixing methanol ($CH_3OH$) saturated with sodium hydroxide (NaOH) and pyridine as solvent with same ratio. The efficacy of this reagent solution was verified by the analysis of chemical mechanism and experiments that showed the color change (brown) of the specimens. This analysis methode using reagent solution is so simple, convenient, inexpensive and immediate that I expect it will be useful in the field of packaging.