• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.60-65
• /
• 2015

In order to improve the strength of paper, mixing ratio of Sw-BKP and Hw-BKP and PVA (polyvinyl alcohol) fibers dosage were investigated. When the Sw-BKP fraction was increased, strength properties were increased because of average fibers length increased. When PVA fraction increased, paper strength was increased, but there was dissolution of PVA in water. The reason for improving handsheet strength that contained PVA was due to increased bonding action between the fibers by the PVA. The addition of PVA to kraft pulp would be helpful for packaging paper materials to increase strength and fracture toughness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.946-952
• /
• 2005

The $CO_{2}$ refrigeration cycle is expected to reduce the compressor work and increase the COP by applying two-phase ejector as a device for the recovery of dissipated expansion energy. In this study, the performance of the cycle was simulated and effects of the ejector shapes on the performance of the $CO_{2}$ refrigeration cycle were investigated. The following results were obtained through the cycle simulation. The COP of the $CO_{2}$ refrigeration cycle with two-phase ejector flow which expansion is occured in the isentropic manner is increased by a maximum of 24 $\%$ than the basic cycle with expansion valve If the velocity nonequilibrium in the mixing process is assumed the COP of the cycle is increased with the increase of the length and the decrease of the section area of the mixing tube. The best cycle performance is obtained when the divergent angle of diffuser is 7.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.90-97
• /
• 2000

In this study, the variation of unit weight and unconfined compressive strength were investigated, calcium carbonate, quicklime, portland cement, 19mm length monofilaments and fibrillated fiber were used as reinforcement materials. And calcium chloride was added to cement and calcium carbonate reinforced soil mixture in order to accelerate setting and hardening speed. It appears that unit weight is highest in calcium carbonate reinforced soil mixture with mixing rate of 9%. According to increasing the amount of fiber in soil mixture, the unit weight decreased. It shows that the more the amount of monofilament fiber is added in soil mixture, the higher the compressive strength is, but the compressive strength is decreased in fibrillated fibrillated fiber added soil mixture with more than 1.0% of mixing rate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.3
• /
• pp.79-84
• /
• 2003

Oriental painting paper (Hwaseonji) was prepared from various kinds of plant fibers and its physical properties were investigated. The fibers used were classified into three different length of fibers; long fiber (<1.8 mm), medium fiber (1.4-1.8 mm) and short fiber (>1.4 mm). The fibers were mixed in the ratio of 15% long fiber, 25% medium fiber and 60% short fiber. The Hwaseonji prepared from mixing of the bamboo or rice straw pulp as a short fiber with the long and medium fibers showed excellent physical properties with a high smoothness and uniformity of Chinese ink blot. Mixing with LBKP as a short fiber was resulted in low physical properties, smoothness and wide ink blot. The properties of Hwaseonji, such as ink absorption, roughness and smoothness, may be predicted from the correlation of density with Chinese ink blot and smoothness.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.403-406
• /
• 2006

An ejector is designed for the purpose of engine bay cooling. The primary flow of the ejector is the exhaust gas of the PW206C turboshaft engine. The mass flow of secondary flow is calculated by using the approximate analytic equation. For the purpose of verification of approximate analytic method, comparison is made with the results of Navier-Stokes turbulent flow solution. According to the results of CFD, the mixing of two flows is incomplete due to the short length of mixing duct.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.97-100
• /
• 2006

An ejector is designed for the purpose of engine bay cooling and exhaust gas cooling. The primary flow of the ejector is the exhaust gas of the turboshaft engine. The mass flow of secondary flow is calculated by using the approximate analytic equation. For the purpose of verification of approximate method, comparison is made with the results of Navier-Stokes turbulent flow solution. According to the results of CFD, the mixing of two flows is incomplete due to the short length of mixing duct.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.50-56
• /
• 2001

Jet pumps are used in a great number of engineering applications. In the present study, jet shapes, mixing chamber shapes, and numerical methods for predicting the performance of an annular-type jet pump are investigated to determine the optimal turbulence model. The flow fields are simulated by solving the momentum and the continuity equations with the standard ${\kappa}-{\epsilon}$ and the RNG ${\kappa}-{\epsilon}$ turbulence models at different Reynolds numbers. After that, they are compared with the corresponding experimental data to determine the optimal model. Next, various calculations are conducted to find an optimal shape using the selected turbulence model. The study shows us that the RNG ${\kappa}-{\epsilon}$ model predicts the performance more exactly, and also shows that the most effective performance can be achieved with $12^{\circ}$ reducing angle and 130mm throat length.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.271-271
• /
• 1999

A concentration change during grade transition operation in thin slab casting is investigated through computer simulation and the results are compared with experimental measurements. Fluid flow and mixing patterns in various tundish levers and flow rates were analysed by a three-dimensional mathematical model. Based on the contained results, a simple, efficient and accurate computational model is suggested to predict the concentration profile at the outlet of the tundish. Based on the model, mixing in and below the mold was analyzed considering electromagnetic braking force. The predicted concentration profiles show good agreements with the measured values. It is found that the lower vortices in the mold are suppressed by the electromagnetic field and a plug-like flow region develops, which decreases the intermixing of two different grades of steel and shortens the length of transition region.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.35-41
• /
• 2001

A newly developed functional fiber for textile, Tencel, which is known to have some advantages over wood fiber such as fibrillation, absorbency and so on, was examined to see the possibility of a raw material for hanji. Hanji was manufactured by the conventional handmade method using Tencel of three different fiber lengths with three different levels of mixing ratio of Tencel and paper mullberry fiber, and their physical and calligraphic properties were evaluated and compared with one another. It was needed to develop more efficient beating methods than conventional one such as valley beating for Tencel to be used effectively as a raw material for hanji. It was found out by image analysis that the calligraphic properties of hanji could be improved by mixing of 10 to 20% of Tencel of relatively short-length fiber with paper mulberry.

• Korean Journal of Hydrosciences
• /
• v.8
• /
• pp.1-17
• /
• 1997

Prandtl's mixing length theory was modified to obtain a power velocity distribution in which the coefficient and the exponent are variable over a range from : $$ A simple suspended-sediment concentration distribution was developed from the modified velocity distribytion : $ With nominal values of $\beta$=1.0, $\kappa$=0.4 and visual accumulation tube values of the fall velocity, the comparison between the theory and field measurements by the USGS on the Rio Grande is fair. Doubling the value of the exponent results in a good comparison. Further researches are needed for choosing the values of $\beta$, $\kappa$, and fall velocity values, and consideration on the effects of large-scale turbulence and secondary flows are necessary for them. In a pragmatic sense, on any gaging sites the close analysis of very detailed measurements can establish its specific coefficient and exponent.