• Journal of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.210-216
• /
• 1984

Solvatochromic comparison methods were applied to determine Taft's solvent parameters, ${\pi}^{\ast}$(solvent polarity-polarizability), ${\alpha}$(solvent hydrogen bond donor acidity) and ${\beta}$ (solvent hydrogen bond acceptor basicity) for MeOH-MeCN solvent mixtures. Swain's solvent parameters A(anion solvation scale) and B(cation solvation scale) were also determined by least square fitting of kinetic data in the same binary solvent mixtures. It was found that: (i)${\beta}$ depends on the basicity of the solvent and increases with the MeOH content owing to the increase in polymeric structure of methanol; (ii) ${\pi}^{\ast}$depends on the dipole moment of the solvent and increases with the MeCN content of the solvent; (iii) ${\alpha}$ increases rapidly with the MeOH content as the hydrogen bond donor acidity of the solvent mixtures increases. Taft's reaction constants a and s and Swain's reaction constants a and b were determined for the reactions reported from our laboratory previously using solvent parameters determined in this work. No meaningful inter-relationship was found between the two set of reaction parameters, but a good linear correlation was found between the ratios a/s and a/b. Solvent effect on the reaction mechanism, substituent effect and leaving group ability were examined in the light of these reaction constants ratios.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1459-1460
• /
• 2011

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.453-462
• /
• 1993

The retention behaviors of polystyrenes influenced by mixed solvents are examined in thermal field-flow fractionation(ThFFF). Experimental data are obtained with polystyrene samples of molecular weights of 35,000, 110,000, 200,000 and 470,000 dissolved in organic solvents. The pure and mixed solvents are tetrahydrofuran(THF), chloroform(CHL), cyclohexane(CH), and benzene(BZ), respectively. The values of retention ratio(R) and thermal diffusion coefficient($D_T$) are measured with change of molecular weight and composition of mixed solvents. Atempts are then made to correlate the measured values with various physicochemical parameters of polymers and solvents. Studies suggest that R is significantly increased with the density of solvent and a good correlation is found between them. $D_T$ values decreases in the mixed solvent having has a higher concentration of poor solvent.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.115-122
• /
• 1997

The field of printing use to pressurization ink using screen gassamer that is called screen printing. Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. Besides, cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic and vibration cleaning process be substituted for existing mixed cleaning method of dipping and polish.

• Clean Technology
• /
• v.2 no.1
• /
• pp.47-52
• /
• 1996

The solvent extraction method was applied on a spent solution containing copper, which was produced in a printed circuit board process, to recover copper and to reuse the etching solution. Lix 64 N ($\alpha$-Hydroxyoxime + $\beta$-Hydroxybenzophenone Oxime) was used as a solvent. The acidic spent copper solution was mixed with and alkaline copper solution to pH=2. The solvent including 30 volume% of Lix 64 N extracted 17.1gr/l of copper from the mixed spent copper solution. In the continuous bench scale experiment, 4 stages for extraction, 2 stages for stripping and 4 stages for washing were used. Recovered copper was recycled as copper sulfate and the raffinate was reused as copper etchant. The percentage of copper recovery and the purity of copper sulfate were higher than 99.9%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.504-510
• /
• 1992

Several single or mixed water-miscible organic solvent systems were investigated to develop the most effective solvent system for enzymatic synthesis of N-benzoylaspartame(BzAPM). The BzAPM was prepared by immobilized thermolysin with using N-benzoyl-L-aspartic acid(Bz-Asp) and L-phenylalanine methyl ester(PheOMe). The solubilities of BzAPM and L-phenylalanine were highest in 4.5% methanol(1.89 and 1.79%, respectively) among the solvents system investigated while a mixed solvent system of 25% dimethyl sulfoxide(DMSO) and 20% polyethylene glycol(PEG) 200 showed relatively high values. The synthetic activity of BzAPM as well as initial reaction rate were found to be high in 45% methanol, 45% DMSO and a mixed solvent of 25% DMSO and 20% PEM 200. The imobilized thermolysin was most stable in 25% DMSO and 20% PEG 200 during storage at $40^{\circ}C$ for 42 days. PheOMe in the same solvent system was also found fairly stable against non-enzymatic decomposition at $40^{\circ}C$. Based on the synthetic efficiency and stability, the solvent system containing 25% DMSO and 20% PEG 200 was selected to be appropriate for the enzymatic synthesis of BzAPM.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.112-115
• /
• 2002

The green colonial algae Botryococcus braunii is characterized by unusual high hydrocarbon contents, ranging from 15 to 75% of dry weight, as long-chain unsaturated hydrocarbons. In two-phase bubble column using various organic solvents, poor recovery 08 - 32%) of hydrocarbon seems to be caused by insufficient mixing between two phases, which was operated using only aeration on the narrow interface between hydrophobic solvent and cell suspension. In addition, hydrocarbon was entrapped tightly in cell-matrix (formed by exopolysaccharide) of algal colony, which make difficult to extract using two-phase system. To improve recovery efficiency, mixed-solvent of extractive solvent (octane) and biocompatible solvent (octane) was tested in two-phase column for in situ extraction. In two-phase extraction culture using mixed-solvent, the algal growth was intensely inhibited even at low concentration of polar octanol solvent. the hydrocarbon recovery in two-stage cell-recycle extraction showed a 2.9 fold increase (57%) over that in two-phase extraction. Up to 60 % of hydrocarbon could be recovered without serious cell-damage in the case of downstream separation for 6 h at the high recycle flow rate using this process after batch culture.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.137-141
• /
• 1992

To investigate some factors on oleoresin extraction from red pepper, the content of yield, capsanthin and capsaicin in oleoresin extracted under various factors such as solvent, variety of materials, extraction time and temperature, storage condition of dried red pepper and its parts, particle size of raw material powder and the ratios of red pepper powder to extraction solvent were investigated. Ethyl alcohol and ethylene dichloride were effective in extracting capsanthin and capsaicin from red pepper, respectively. Mixed-solvent bore fruitful in increasing of oleoresin yield, but was fruitless in extracting capsanthin and capsaicin in comparison with single-solvent. In three varieties such as Juktoma, Jinsol and Dabok, Jinsol was excellent in oleoresin extraction. Optimum extracting temperature and time was $20^{\circ}C$ and three to five hours, respectively. Oleoresin quality from long-term storage and/or coarse red pepper were low in point of yield, capsanthin and capsaicin. Capsanthin and capsaicin were distributed into pericarp and seed in abundance, respectively. Optimum mixing ratio of red pepper powder to extracting solvent was suitable for one to three(1 : 3) or one to four(1 : 4) in oleoresin extraction.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.219-227
• /
• 2005

Competitive solvent extraction of the mixure of alkali metal and alkaline earth cation from water into organic solvent containing the crown ether carboxylic acid and anlogous crown ether phosphonic acid was investigated as follows. The lipophilic group is found to strongly influence to the selective extraction in the mixed systems from only alkali metal cation for sym-(n-decyldibenzo)-16-crown-5-oxyacetic acid $\underline{1}$ to mostly alkaline earth metal cation for sym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxyacetic acid $\underline{3}$. Monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{2}$. and monoethyl-sym- bis]4(5)-tert-butylbenzo]-16-crown-5-oxymethylphosphonic acid $\underline{4}$ showed good selectivity for $Na^+$ over $Mg^{2+}$, the second extracted ion. Structural variation in the crown ether phosphonic acid somewhat was influenced to the extraction selectivity in the mixed systems. when variation of the ionized group is influenced in the mixed systems, the selectivity of $Na^+$ as the second extracted ion was much better crown ether carboxylic acid $\underline{1}$ than crown ether phosphonic acid $\underline{2}$, while the efficiency of $Na^+$ extraction was better $\underline{2}$ (83% total loading) than $\underline{1}$ (32%).