• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.27-32
• /
• 1999

A numerical study based on the three-dimensional thin-layer Navier-Stokes solver is carried out to analyze the flowfield through a single stage transonic compressor. Explicit four-step Runge-Kutta scheme with spatially variable time step and implicit residual smoothing is used. The governing equations are discretized with exploit finite difference method. Mixed-out average method is used at the interface between rotor and stator. And, an artificial dissipation model is used to assure the stability of solution. The results with k-$\omega$ turbulence model were compared to the results with Baldwin-Lomax model, and physical phenomena of transonic compressor are presented. The two turbulence models give the results that show reasonably good agreements with experimental data.

• 한국수산과학회지
• /
• 제17권2호
• /
• pp.83-91
• /
• 1984

$1982{\sim}83$년과 $1966{\sim}70$년의 해양관측자료를 사용하여 하계 우리나라 서해 연안에서 형성되는 조석전선의 형성원인과 그 위치 및 구조를 조사하였다. 하계에 형성되는 전선은 조류에 의한 해저 난류로 연직혼합이 일어나는 곳과 외해와의 경계성이며, 그 위치는 수온, 염분, 용존산소의 수평경도와 수색 및 투명도로써 조사한 결과, G선($35^{\circ}31^'N$)과 S선($35^{\circ}25^'N$)의 연안에서 약 20mile 떨어진 해역이었다. 성층상태를 고려한 위치에너지는 V=10 $Joule/m^3$였으며, 수온, 염분, 용존산소와 수색 및 투명도로 조사한 전선의 위치는 이와 대체로 일치하였다. 따라서 이 역을 경계로 연안쪽은 물리, 화학적인 특성이 연직적으로 균일한 혼합층을 형성한다. 외해쪽에는 수면에서 약 $10{\sim}20m$까지 표면 혼합층, 약층, 그리고 저층 혼합층의 순으로 수괴의 구조가 형성되 어 있다. 동계에는 서해 전역이 표면냉각으로 인하여 전 해역에서 연직혼합이 일어나므로 하계의 구조와 같은 전선은 명확하게 형성되지 않는다.

• 한국콘텐츠학회논문지
• /
• 제13권12호
• /
• pp.38-47
• /
• 2013

다중 레이어 영상 모델인 Mixed Raster Content 모델 (MRC) 기반의 영상 부호화는 스크린 이미지와 같은 혼합 영상을 전경 레이어, 이진 마스크 레이어, 배경 레이어로 재구성한 뒤, 각 레이어마다 그 레이어의 신호 특성에 적합한 부호화기를 이용하여 영상을 압축하는 기법이다. 문자와 같은 계단 형태의 강한 에지를 갖는 영역의 위치 정보를 마스크 레이어에 저장하고, 그 위치의 색상 신호는 전경 레이어에 저장한다. 그리고 나머지 영역인 배경 영역의 색상 신호는 배경 레이어에 저장한다. 따라서 마스크 레이어가 전경과 배경의 분할 정보를 담게 되며, 이 분할 정보의 정확도에 따라 전체 부호화기의 압축 효율이 직접적인 영향을 받는다. 본 논문은 MRC 기반의 영상 부호화를 위한 새로운 레이어 분할 알고리즘을 제안한다. 제안 방법은 형태학적 필터인 top hat 변환을 이용하여 문자를 배경신호로부터 분할한다. 이때 문자의 경계를 에지 맵으로부터 추정하여 문자 색상과 배경과의 상대적 밝기를 결정하고 이를 통해 형태학적 필터링에 필요한 top hat 변환의 종류를 정확히 선택하도록 하였다. 실험을 통해 제안 방법이 비교 대상 알고리즘에 비해 우수한 분할 성능을 가짐을 보인다.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.901-909
• /
• 1996

A model is constructed to evaluate the stress intensity factors(SIFs) for composites with an interlaminar crack subjected to as arbitrary crack surface loading. A mixed boundary value problem is formulated by Fourier integral transform method and a Fredholm integral equation of the second kind is derived. The integral equation is solved numerically and the mode I and II SIFs are evaluated for various shear modulus ratios between each layer, crack length to layer thickness, each term of crack surface polynomial loading and the number of layers. The mode I and II SIFs for the E- glass/epoxy composites as well as the hybrid composites are also evaluated.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.961-967
• /
• 1999

A model is constructed to evaluate the mode III stress intensity factor(SIF) for orthotropic three-layered material with a center crack subjected to uniform anti-plane shear loading. A mixed boundary value problem is formulated by Fourier integral transform method and a Fredholm integral equation of the second kind is derived. The integral equation is numerically analyzed to evaluate the effects of the ratio of shear modulus, strength of each layer and crack length to layer thickness on the stress intensity factor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.67-72
• /
• 2003

Numerical calculation has been performed to investigate the effect of inlet configuration on the growth rate of GaN layer on the heated susceptor. The conventional single inlet, where the gas is mixed by force in the inlet, is compared with separated flow inlet. Two-parallel gas flow $H_{2}$ and $NH_{3}$ are separated by a plate with finite length which are also parallel to the susceptor. The effect of separated plate length, carrier gas and flow rate of each precursor on the mixing of reactant gases and growth rate were investigated. Furthermore the three dimensional model is employed to predict the transverse variation of growth rate.

• Journal of the korean society of oceanography
• /
• 제39권1호
• /
• pp.35-45
• /
• 2004

Based on the MASNUM wave-current coupled model, the temperature and salinity structures along $36^{\circ}N$ in the Yellow Sea are simulated and compared with observations. Both the position and strength of the simulated thermocline are similar to data analysis. The wave-induced mixing is strongest in winter and plays a key role in the formation of the upper mixed layer in spring and summer. Numerical experiments suggest that in the coastal area, wave-induced mixing and tidal mixing control the vertical structure of temperature and salinity.

• 환경영향평가
• /
• 제8권1호
• /
• pp.1-16
• /
• 1999

The acid deposition and photochemical modeling study was performed on the Eastern Asia using Regional Acid Deposition Model(RADM). The results of this study show that horizontal distribution of $SO_2$, concentration and dry deposition flux was higher in Beking, Shanghai and central part of Korea. However distribution pattern of sulfate and $O_3$ concentration calculated by RADM were not similar to emission pattern. In daytime, $SO_2$, sulfate and $O_3$ were mixed to whole PBL but in nighttime because of inversion layer these pollutants were suppressed to lower level.

• 한국환경보건학회지
• /
• 제47권3호
• /
• pp.267-278
• /
• 2021

Objectives: Using atmospheric dispersion representative models (AERMOD and CALPUFF), the emissions characteristics of each model were compared and analyzed in ready-mixed concrete manufacturing facilities that generate a large amount of particulate matter (PM-10, PM-2.5). Methods: The target facilities were the ready-mixed concrete manufacturing facilities (Siheung RMC, Goyang RMC, Ganggin RMC) and modeling for each facility was performed by dividing it into construction and operation times. The predicted points for each target facility were selected as 8-12ea (Siheung RMC 10, Goyang RMC 8, and Gangjin RMC 12ea) based on an area within a two-kilometer radius of each project district. The terrain input data was SRTM-3 (January-December 2019). The meteorological input data was divided into surface weather and upper layer weather data, and weather data near the same facility as the target facility was used. The predicted results were presented as a 24-hour average concentration and an annual average concentration. Results: First, overall, CALPUFF showed a tendency to predict higher concentrations than AERMOD. Second, there was almost no difference in the concentration between the two models in non-complex terrain such as in mountainous areas, but in complex terrain, CALPUFF predicted higher concentrations than AERMOD. This is believed to be because CALPUFF better reflected topographic characteristics. Third, both CALPUFF and AERMOD predicted lower concentrations during operation (85.2-99.7%) than during construction, and annual average concentrations (76.4-99.9%) lower than those at 24 hours. Fourth, in the ready-mixed concrete manufacturing facility, PM-10 concentration (about 40 ㎍/m³) was predicted to be higher than PM-2.5 (about 24 ㎍/m³). Conclusions: In complex terrain such as mountainous areas, CALPUFF predicted higher concentrations than AERMOD, which is thought to be because CALPUFF better reflected topographic characteristics. In the future, it is recommended that CALPUFF be used in complex terrain and AERMOD be used in other areas to save modeling time. In a ready-mixed concrete facility, PM-10, which has a relatively large particle size, is generated more than PM-2.5 due to the raw materials used and manufacturing characteristics.

• 한국산림과학회지
• /
• 제94권5호통권162호
• /
• pp.321-329
• /
• 2005

Based on the data representing four typical Korean pine forest types, the age structure, DBH distribution, species composition, and forking rule were systemically analyzed for old-growth Korean pine forest in Liangshui Nature Reserve, northeast China. The age structure of Korean pine trees was strongly uneven-aged with one dominated peak following normal distribution, and age of trees varied from 100 to 180 years within a stand. The DBH and height differences in same age class (20 years) varied from 28 cm~64 cm and 5 to 20 m, respectively. Many conifer and hard wood species, such as spruce, fir, costata birch, basswood, oak, and elm, were mixed with dominated trees of Korean pine. The canopy of the old-growth Korean pine forest can be divided into two layers, and differences of mean age and height between Layer I and Layer II were ranged 80~150 years and 7~13 m, respectively. The Weibull function was used to model the diameter distribution and performed well to describe size-class distribution either with a single peak in over-story canopy and inverse J-shape in under-story canopy for old-growth Korean pine stands. The forking height of Korean pine trees ranged from 16m to 24 m (mean 19.4 m) and tree age about 120 to 160 years old. The results will provide a scientific basis to protect and recover the ecosystem of natural old-growth Korean pine and also provide the model in management of Korean pine plantation.