• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.195-201
• /
• 1997

본 논문은 kaolinite(Al2O3.2SiO2.2H2O)-aluminum trihydroxide(Al(OH3) 혼합물을 소결전에 planetary ball mill을 사용하여 건식 중에서 혼합분쇄한 후, 이 혼합물을 사용하여 소결하는 동안에 mullite의 생성거동을 연구한 것이다. 혼합물의 입자크기 감소는 분쇄 초기에 현저하였으며, 분쇄기간이 증가함에 따라 미립자들이 응집하는 현상을 보였다. 혼합물의 결정구조는 planetary ball milling에 의한 혼합분쇄에 따라 쉽게 비정질화되었으며, 비정질화되는 정도는 분쇄시간이 증가함에 따라 증가하였다. Kaolinite의 초기 분순물로 존재했던 anatase를 제외한 mullite상만이 상대적으로 낮은 소결온도인 1523K에서 혼합분쇄한 혼합물의 소결체에서 나타났다. 한편, 분쇄하지 않은 혼합물의 소결체의 경우는 이 온도에서 mullite 상 이외에 corundum, cristobalite, Al-Si spinel상이 공존하는 형태로 나타났다. 따라서, 혼합분쇄처리는 출발원료의 미소 규모에 있어서 균일혼합 및 분산을 촉진시키며, 또한 결정구조변화에 따른 열분해온도의 변화일으켜, 상대적으로 낮은 온도에서 고순도의 mullite를 직접 생성하는데 효과적이였다.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.92-98
• /
• 2004

The current efficiency and the microstructure of the trivalent Cr deposits plated in flow cell system were investigated according to additives in sulfate bath and current density. The current efficiency of the deposits plated in the formic acid complexed bath was noticeably higher than that of the deposits from glycine complexed bath. The current efficiency of the deposits from the complexed baths with boric acid buffer increased linearly with current density in the range of 60-100 A/dm$^2$, while that of the deposits from the baths with both Al sulfate and mixed buffers increased parabolically with current density. The nodular crystallite size of the deposits increased with current density, and the deposits plated in low current density region had relatively smooth surface appearance with fine grains. The structure of the deposits from the complexed baths with boric acid buffer changed from amorphous structure to crystalline one with strong (110)peak with increasing current density. The deposits from the baths with both Al sulfate and mixed buffers had generally amorphous structure.

• Journal of the Korean Data and Information Science Society
• /
• 제21권1호
• /
• pp.1-9
• /
• 2010

본 논문은 분할구 실험에서 반복측정 요인이 처치의 한 요인으로 고려될 때, 실험자료의 분석을 위한 혼합모형과 모형내 미지모수의 추론을 위한 방법을 논의한다. 반복측정 요인으로 공간요인을 고려하고 공간요인의 수준은 분할구에 할당되나 연구자가 임의로 배정할 수 없는 실험환경이 가정된다. 이러한 실험의 특성을 갖는 자료벡터의 확률분포로 복합대칭의 공분산 구조를 갖는 다변량 정규분포를 논의하고 있다. 또한, 가정된 실험환경에 부합하는 적합한 자료의 예를 통하여 제시된 모형의 타당성과 관련모수들의 추론방법을 다루고 있다.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.206-219
• /
• 1996

This paper describes a data structure and evaluation algorithm to improve the perofmrances MOS logic-with-timing simulation in computation and accuracy. In order to efficiently simulate the logic and timing of driver-load networks, (1) a tree data structure to represent the mutual interconnection topology of switches and nodes in the driver-lod network, and (2) an algebraic modeling to efficiently deal with the new represetnation, (3) an evaluation algorithm to compute the linear resistive and capacitive behavior with the new modeling of driver-load networks are developed. The higher modeling presented here supports the structural and functional compatibility with the linear switch-level to simulate the logic-with-timing of digital MOS circuits at a mixed-level. This research attempts to integrate the new approach into the existing simulator RSIM, which yield a mixed-klevel logic-with-timing simulator MIXIM. The experimental results show that (1) MIXIM is a far superior to RSIM in computation speed and timing accuracy; and notably (2) th etiming simulation for driver-load netowrks produces the accuracy ranged within 17% with respect ot the analog simulator SPICE.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.88-95
• /
• 1999

This study investigates the effects of different kind fuels on the flame structure by using the numerical simulation in triple flame made by a co-flowing fuels-air stream based on the elementary chemical reaction mechanism. Methane and Hydrogen were used as fuel for this study. In order to interpret the result of the study on numerical simulation Skeletal chemistry is employe as the elementary chemical reaction mechanism for methane Gutheil's as an offset ele-mentary chemical reaction mechanism for hydrogen. The result of this study is as follows. In com-parison between the apparent burning velocity change of triple flame and the one-dimensional pre-mixed flame hydrogen fuel flame is higher than methane fuel flame. The flame thrusts out for-ward in the down stream of the boundary between air-fuel mixture and air stream and a part of the flow is bent and forks out in this protruding flame so that a triple flame is originated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.497-500
• /
• 2004

Recently, the use of structure compound waterproof agent (hereinafter referred to as 'SCWA') that is used when manufacturing concrete for concrete structures, increases in quantity. However, while it is expected that the SCWA that is mixed in the concrete inside can significantly affect the change of physical properties that lift the internal force of a structure. This study has been conducted through an experiment for the effects of cement hardener on the formation of microscopic texture, and newly generated hydrates from that result were not confirmed in the present experiment. It was found that at the hydrate reaction it has the property that can be hardened within the limit of pore diameterar a specific size rather than there is the internal gap filling capacity due to generating other hydrates.

• 한국지진공학회논문집
• /
• 제6권1호
• /
• pp.55-62
• /
• 2002

상부벽식-하부골조 구조(복합구조)는 일반적으로 전이층을 중심으로 상부는 주거공간의 전단벽식의 고층아파트이고 하부는 상업공간의 보-기등의 골조구조이다. 이러한 구조물은 구조형식의 특성상 강성비정형, 질량비정형, 기하학적 비정형 등 비정형 형태의 특징을 갖고 있다. 본 연구에서는 하부골조 구조물의 층수가 변화할 경우에 대해 복합 구조물의 비선형 거동특성과 내진성능을 파악하였다. 비선형 해석결과로부터 얻은 결론은 다음과 같다. 1) 비선형 정적해석의 최상층변위각과 밑면전 단력계수로부터 하부구조의 층수가 증가할 경우 구조물의 밑면전단력계수는 감소하였으나 최상층변위각은 증가하였다. 2) 하부구조의 층수가 증가할 경우 상부벽식구조의 층간변위각과 소성율은 감소하였으며, 상부벽식은 탄성상태에 가까운 거동을 하였다. 3) 하부구조의 층수가 증가할 경우 하부구조에서 층간변위각이 집중적으로 증가하였다.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.9-18
• /
• 1999

본 논문에서는 시분할-파장분할 방식이 혼합된 라우팅 구조를 가지는 대용량 광ATM 스위치 구조를 제안하였다. 제안된 구조는 셀의 경로배정 과정에서 겪게되는 광 파워의 손실 및 시스템 구성시 요구되는 하드웨어를 줄일 수 있을 뿐만 아니라 수동소자를 사용함으로써 전기적 제어부분의 복합성을 피할 수 있다. 또한 제안된 스위치는 확장이 용이하도록 설계되어졌기 때문에 처리용량에 있어서 미래의 대욜양 광 교환 시스템에 적합한 구조라고 할 수 있다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.153-158
• /
• 2011

According to the change of life environment and economic growth, the more city has highly developed, the more concentrated urban function. That is, city is required for adding infra structure. But, both of limited land resources and financial problems made it impossible to add infra structure. So, the necessity of multi-dimensional planning of urban infra structure was recognized. Especially, In Urban residential area, in order to secure parking area, It is on the increase that mixed-use of the playground of school in the high density area and the empty space of park. School and park is closely connected with town community, playing a central role on town life. For this reason, they are highly demanded for providing space in the urban residential area and also expected to be effective. However, people using park and school are almost young students and the elderly, it needs to consider not only the parking convenience also the safety of users in design process. In this study, we analysed the physical characteristics and the utilization of mixed-use of school and park. and then evaluated the case in the point of convenience and safety. For this, first we selected the case among the sites constructed in seoul, and divided 2type of 'slope type' and 'flatland type'. The meaning of this study is to suggest elementary standards for design in the point of multi-dimensional land use planning.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.