• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.176-183
• /
• 2023

The extraction and filtration of red ginseng with a mixed solvent of water and alcohol-a common processing method-and the production of a concentrate through heat treatment, such as steaming, leads to its hydrolysis or polymerization. Approximately 200 ginsenosides have consequently been detected in small amounts, in addition to the identification of the functions of approximately 30 major ginsenosides. This complicates the identification of the functionality of red ginseng and its efficacy, and has negative effects as a functional food, as the astringent taste becomes stronger with an increase in the number of extractions. The red ginseng concentrate was, therefore, extracted at a low temperature (less than 40 ℃) and processed to eliminate these negative aspects, with a specific focus on the characteristics of the functional components of ginsenosides.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.221-233
• /
• 2024

Lignin, a prominent constituent of woody biomass, is abundant in nature, cost-effective, and contains various functional groups, including hydroxyl groups. Owing to these characteristics, they have the potential to replace petroleum-based polyols in the polyurethane industry, offering a solution to environmental problems linked to resource depletion and CO₂ emissions. However, the structural complexity and low reactivity of lignin present challenges for its direct application in polyurethane materials. In this study, Kraft lignin (KL), a representative technical lignin, was fractionated with ethanol, an eco-friendly solvent, and mixed with conventional polyols in varying proportions to produce polyurethane films. The results of ethanol fractionation showed that the polydispersity of ethanol-soluble lignin (ESL) decreased from 3.71 to 2.72 and the hydroxyl content of ESL increased from 4.20 mmol/g to 5.49 mmol/g. Consequently, the polyurethane prepared by adding ESL was superior to the KL-based film, exhibiting improved miscibility with petrochemical-based polyols and reactivity with isocyanate groups. Consequently, the films using ESL as the polyol exhibited reduced shrinkage and a more uniform structure. Optical microscope and scanning electron microscope observations confirmed that lignin aggregation was lower in polyurethane with ESL than in that with KL. When the hydrophobicity of the samples was measured using the water contact angle, the addition of ESL resulted in higher hydrophobicity. In addition, as the amount of ESL added increased, an increase of 7.4% in the residual char was observed, and a 4.04% increase in Tmax the thermal stability of the produced polyurethane was effectively improved.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.111-118
• /
• 2014

The electrochemical properties using the cells assembled with the synthesized $LiCoO_2$(LCO) were evaluated in this study. The LCO was synthesized from high-purity cobalt sulfate($CoSO_4$) which is recovered from the cathode scrap in the wastes lithium ion secondary battery(LIB). The leaching process for dissolving the metallic elements from the LCO scrap was controlled by the quantities of the sulfuric acid and hydrogen peroxide. The metal precipitation to remove the impurities was controlled by the pH value using the caustic soda. And also, D2EHPA and $CYANEX^{(R)}272$ were used in the solvent extraction process in order to remove the impurities again. The high-purity $CoSO_4$ solution was recovered by the processes mentioned above. We made the 6 wt.% $CoSO_4$ solution mixed with distilled water. And the 6 wt.% $CoSO_4$ solution was mixed with oxalic acid by the stirring method and dried in oven. $LiCoO_2$ as a cathode material for LIB was formed by the calcination after the drying and synthesis with the $Li_2CO_3$ powder. We assembled the cells using the $LiCoO_2$ powders and evaluated the electrochemical properties. And then, we confirmed possibility of the recyclability about the cathode materials for LIBs.

• Journal of Life Science
• /
• v.27 no.1
• /
• pp.57-66
• /
• 2017

Traditional Korean fermented herbal plants are potential sources of new food that promote health, but they are still produced by yeast, fungi or bacteria fermentation. In the present work, mushroom (Paecilomyces tenuipes and Cordyceps militaris) fungal dongchunghacho were used to fermented Glycyrrhiza uralensis Fischer (licorice) or mixed with pupa. The pupa were tested as solid substrates for the production of corcycepin, liquiritin, and liquiritigenin. The fermented substrates were analyzed the content of cordycepin, liquiritin, liquiritigenin, and glycirrhizin productivity and inhibitory activity of NO. The cordycepin content of 70% EtOH extract from the fermented mixture of licorice and 50% pupa with C. militaris increased maximum at 33 times. Pupa was very excellent for the production of cordycepin. The liquiritin content was decreased in all the assays inoculated with P. tenuipes and C. militaris dongchunghachos. The liquiritigenin content was higher when fermented with P. tenuipes than C. militaris. The addition of pupa significantly reduced the liquiritin content and glycyrrhizin production. As a result, the liquiritigenin content increased in fermented P. tenuipes and C. militaris, and liquiritin and glycyrrhizin decreased. The inhibition of NO production in the different ethanolic extracts fermented with licorice and pupa was also significantly increased and higher than that of a nonfermented extract in higher polar solvent extracts. The contents of cordycepin and biological active compounds were altered in accordance with the concentration of pupa and fungi. This study provides basic data for use in developing dongchunghacho fungi as a functional food resource.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.219-238
• /
• 1998

For the purpose of this Study, the situation of Korean costume properties in the collection of overseas museums was investigated through correspondence, interviews with their curators and persons in charge and survey. As results were made about the situation of museum science (conservation) and practical utilization of costume properties. So, the study result were drawn as follows : Krean costume properties unexplaind of 'Korean cultural Properties' could be found in the Metropolitan Museum of Art of New York(135 pieces), the Brooklyn Museum of New York(20 pieces), the Newark Museum of New Jersey(15 pieces), and the Victoria Albert Museum of London(100 pieces). Korean costume properties in the collection of over-seas museums mostly fall under the rang of period between the 19th century and the early 20th century and are classified into everyday clothing, wedding costume and armors for the most part. In 1900s, museum in several countries began to collected Korean cultural properties through foreign missionaries or diplomats as well as merchants or travellers in who bought Korean objects. Recently, scholars, traditional Korean costume designerss and diplomatic and consular offices in overseas have donated our Korean costume to many foreign museums. Korean costume properties were largely on display in the dependent display of folklore museums or in a part of exhibition gallery for Asian culture and there were the separate exhibition rooms in museums in the United Kingdom, Germany, Denmark, Austria, Japan and the United States America. But the size and level of display room for Korean cultural properties is one third as large as that for chinese or Japanese cultual properties. It was found in this study that the traditional Korean costume in the collection of overseas museums was largely recorded only as general items rather than given their proper names. The typical example of misnaming included bridal's Kimono for Wonsam(원삼) in the Metropolitan Museum of Art, Yeonroksaek-bumunsajeokori for Dangeui(당의) and Jissan-gryongwonmunsadurumagi for Kongdali(동달이) in the Okura collection of the Tokyo National Museum, and so on. And the Victoria Albert Museum modified the way of wearing Daenim(대님) and the National Museum of Ethnology in Osaka seemed to misplace the ornament of Keanggi(댕기) on Mubok(무복) and Josunjuk(조선족: Chinese-Korean) Museum also misplace hansam(한삼). On the one hand, the Newark museum of New Jersey mixed Chinese armor with the Korean one and the Photohraph of King Kojong(고종) with Chinese one. It is corrected to publish and disseminate the book concering Korean costume in order to inform foreign museums of thed proper names and wearing method of our traditional costumed. The repair of costume before cleaning in the process of conservation treatment can prevent damage likely to occur as the properties of fiber itself are weakened in liquid. It is recommended that western 8-figure stitch and tacking stitch is added to Korean traditional stitching method. Museums in the U.S.A and the U.K are concerned about the aftermath of cleaning it-self, specially conservation treatment may exert on remains and predominantly use the vacuuming method to remove dust or bits of straw before the exhibition beings. But in case of Korea, the dry cleaning and wet cleaning method are used according to the nature and state of a sample costume. This comprehensive cleaning method is gradually developing scientifically but it is expected that those concerned will make a chemical analysis of the solvent to be used and also the more precise test of costume properties will be conducted before cleaning them. A partial study was made here because the scope of study was too broad and vast. It is expected that more studies will be conducted concerning our costume culture under the long-term plan and active support at the government level.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.225-234
• /
• 1979

For the effective utilization of diverse and abundant resource of seaweeds in Korea as a food protein supplment, extraction conditions of water, salt, and alkali soluble proteins were investigated in previous work(Ryu and Lee, 1977: Lee et al., 1977: Lee et al., 1978). The present study as a part of the serial work was thus aimed to find the conditions of isolation and purification of extracted proteins, and to evaluate the nutritional quality of the isolated seaweed proteins in terms of amino acid composition, chemical score, protein score, modified essential amino acid index(MEAAI), and in vitro digestibility presented as pepsin-pancreatin digest residue index (PPDRI). As for the isolation of extracted proteins, TCA treatment was more effective for the proteins from rhodophyceae and Chlorophyceae while the precipitation at isoelectric point was more desirable for Phaeophyceae proteins. In amino acid composition, water soluble protein fraction was superior to the other fractions in Porphyra suborbiculata whereas both water and alkali soluble fractions seemed to bo more benefitial for Enteromorpha linza and Ulva pertusa; the extraction with alcohol-alkali mixed solvent for Undaria pinnatifida and Sargassum fulvellum. Glutamic acid and aspartic acid content was particularly high in all protein fractions examined. The total amino acid content of Porphyra suborbiculata and Enteromorpha linza was almost equivalent to that of dried whole egg although the essential amino acid content was lower. A comparative analysis was made on the inedexes between raw seaweed powder and isolated protein. Chemical score of Porphyra suborbiculata and Ulva pertusa was approximately 35 and 56 in cafes of raw powder and isolated protein respectively while only 10 to 16 for raw powder of Undaria pinnatifida and Sargassum fulvellum and 30 to 35 for their isolated proteins. Protein score of all isolated proteins was in the range of 63 to 73 which indicates that isolated protein would be mere valuable than the fern of raw seaweed powder. Digestibility by means of PPDRI was found to be extremely low in case of raw powder but it could be doubled in case of isolated protein yielding 67 to 70 for Porphyra suborbiculata and Ulva pertusa.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.222-235
• /
• 2007

The objectives of this study was to evaluate the effect of thermocycling on the ${\mu}TBS$ (microtensile bond strength) to dentin with four different adhesive systems to examine the bonding durability. Freshly extracted $3^{rd}$ molar teeth were exposed occlusal dentin surfaces, and randomly distributed into 8 adhesive groups 3-steps total-etching (Scotchbond Multi-Purpose Plus; SM, All Bond-2; AB), 2-steps total-etching (Single Bond; SB, One Step plus; OS), 2-steps self-etching (Clearfil SE Bond; SE, AdheSE AD) and single-step self-etching systems (Promp L-Pop; PL, Xeno III; XE) Each adhesive system in 8 adhesives groups was applied on prepared dentin surface as an instruction and resin composite (Z250) was placed incrementally and light-cured. The bonded specimens were sectioned with low-speed diamond saw to obtain $1\times1mm$ sticks after 24 hours of storage at $37^{\circ}C$ distilled water and proceeded thermocycling at the pre-determined cycles of 0, 1,000 and 2,000. The ${\mu}TBS$ test was carried out with EZ-tester at 1mm/min. The results of bond strength test were statistically analyzed using one-way ANOVA/ Duncan's test at the a < 0.05 confidence level. Also, the fracture mode of debonded surface and the interface were examined under SEM. The results of this study were as follows ; 1. 3-step total etching adhesives showed stable, but bond strength of 2-step adhesives were decreased as thermocycling stress. 2. SE showed the highest bond strength, but single step adhesives (PL, XE) had the lowest value both before and after thermocycling. 3 Most of adhesives showed adhesive failure. The total-etching systems were prone to adhesive failure and the single-step systems were mixed failure after thermocycling. Within limited results of this study, the bond strength of adhesive system was material specific and the bonding durability was affected by the bonding step/ procedure of adhesive Simplified bonding procedures do not necessarily imply improved bonding performance.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.446-454
• /
• 2017

Garlic (Allium sativum L.) and traditional herb has several functional properties and strong biological activities, making it useful as a functional food material. We investigated the antioxidant and anti-inflammatory activity of mixed compounds from red garlic and supplementary materials, including ginger (Zingiber officinale Roscoe), doraji (Platycodon grandiflorum), quince (Chaenomeles sinensis), citrus peel (Citri Pericarpium), and mint (Mentha arvensis). The extracts were prepared with water (W) and ethanol (E) at $70^{\circ}C$ (W-70, E-70) and $95^{\circ}C$ (W-95, E-95) for 3 h. The total content of phenolic compounds was the highest in E-70 (608.60 mg/100 g). Alliin, one of the active ingredients in red garlic, was contained at 1.18-1.29 mg/g and 0.81-0.85 mg/g in water and ethanol extract, respectively. Another active ingredient of red garlic, S-allyl-cysteine (SAC) had higher content in the water extract than in the ethanol extracts. DPPH radical scavenging activity was higher in E-70 (15.96-73.65%) at $313-5,000{\mu}g/mL$. ABTS radical scavenging activity was also higher in E-70 (5.71-77.19%) than in the others. The ROS production rate showed the same tendency as the NO production, with more efficacy in E-95. The expression level of iNOS and $IL-1{\beta}$ was decreased in the E-95 significantly at the concentration of $1,000{\mu}g/mL$ compared to the lipopolysaccharide (LPS) treated group. Based on the above results, the antioxidative and anti-inflammatory activities of the extracts of red garlic and supplementary materials were expressed by different useful substances. The contents of these useful substances were different according to the extraction solvent and temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.333-343
• /
• 1984

This study was designed to elucidate the lipid and its fatty acid composition in various tissues of fresh water fishes. The free and bound lipids in meat, skin and viscera of crucian carp (Carassius carassius) were extracted with ethyl ether and the mixed solvent of chloroform-methanol-water (10/9/1, v/v). The free and bound lipids were fractionated into neutral lipid, glycolipid and phospholipid by a silicic acid column chromatography using chloroform, acetone and methanol, respectively, and quantitatively analyzed by thin layer chromatography (TLC) and TLC scanner. The fatty acid compositions of polar ana nonpolar lipids in meat, and these of neutral lipid in various tissues were analyzed by gas liquid chromatography(GLC). The free lipid content in meat, skin and viscera was $6.22\%,\;9.95\%\;and\;9.76\%$, whereas the bound lipid content in those tissues was $10.01\%,\;3.56\%\;and\;7.36\%$, respectively. The neutral lipid contents in free lipid were ranged from $71.7\%$ to $89.4\%$, and $3{\sim}9$ times higher than those in bound lipid, while the phospholipid contents in bound lipid were ranged from $42.3\%$ to $63.2\%$, and $5{\sim}10$ times higher than those in free lipid. The neutral lipid was mainly consisted of triglyceride ($81.91{\sim}88.34\%$) in free lipid, and esterified sterol & hydrocarbon ($41.00{\sim}59.43\%$) in bound lipid. The phospholipid was mainly consisted of phosphatidyl ethanolamine($54.56{\sim}66.79\%$) and phosphatidyl choline ($21.88{\sim}34.28\%$) in free lipid, and phosphatidyl choline ($50.49{\sim}70.57\%$) and phosphatidyl ethanolamine ($15.74{\sim}24.92\%$) in bound lipid. The major fatty acids of polar lipid in free and bound lipids were $C_{16:0}\;(17.53\%,\;19.29\%)$, $C_{18:1}\;(24.57\%,\;16.08\%)$, $C_{18:2}\;(8.39\%,\;4.03\%)$, $C_{22:5}\;(1.68\%,\;8.08\%)$, and $C_{22:6}\;(6.22\%,\;13.60\%)$ and these of neutral lipid in free and bound lipids were $C_{16:0}\;(17.67\%,\;24.15\%)$, $C_{16:1}\;(12.81\%,\;5.52\%)$, $C_{18:1}\;(24.13\%,\;13.02\%)$, $C_{18:2}\;(15.47\%,\;8.68\%)$, $C_{22:5}\;(0.88\%,\;4.14\%)$ and $C_{22:6}\;(1.17\%,\;5.04\%)$, respectively. The unsaturations (TUFA/TSFA) of polar lipid in free and bound lipids were 2.02 and 2.74, and $1.5{\sim}2.0$ times higher than 1.51 and 1.23 of nonpolar lipid. In both polar and nonpolar lipids, w3 highly unsaturated fatty acid (w3HUFA) content of bound lipid was $2{\sim}5$ times higher than that of free lipid. The polyenoic acid contents such as $C_{20:5},\;C_{22:5}\;and\;C_{22:6}$ in bound lipid were $2{\sim}5$ times higher than these in free lipid. Consequently, there were significant difference between the lipid and its fatty acid composition in free and bound lipids and/or in various tissues.