• Journal of Advanced Marine Engineering and Technology
• /
• 제7권2호
• /
• pp.15-21
• /
• 1983

Preparing for treatment and management of the emulsified fuel oil which will be generalized henceforth, this paper is an attempt to examine the viscosity-temperature characteristics of emulsified heavy fuel oil which is mixed with water and emulsifier in various mixture ratio by mechanical mixer. The experimental results are summarized as follows: 1. The viscosity-temperature characteristics of the emulsified C & B grade heavy fuel oil mixed with water of same or less weight, is changed according to log.log(v+0.6)=b-3.8log T. 2. The emulsifier has to be added to the emulsified A grade heavy fuel oil mixed with water of same or less weight, because it is instable. Especially if the emulsifier is sodium stearate, it is added more than 0.3% of the weight of oil and water. 3. In the emulsified A grade heavy fuel oil mixed with water and emulsifier, the higher the ratio of water addition becomes, the higher the viscosity is and the more the viscosity-temperature slope decreases. But the higher the ratio of emulsifier addition is, the more the viscosity-temperature slope increases. In this case, the linearity of viscosity-temperature characteristic curve is poorer than that of B and C grade heavy fuel oil. 4. In the emulsified A grade heavy fuel oil mixed with emulsifier of 0.3% or less, the emulsion type is O/W type when water addition ratio is 40%, but it is W/O type when it is 10%, 20%, 30% and 50%.

• 한국작물학회지
• /
• 제60권4호
• /
• pp.458-463
• /
• 2015

사료용으로 개발된 청보리 품종들은 일반 곡실용 보리품종에 비해 조사료 생산량이 30%이상 증수하고 가축선호성이 우수한 품종이다. 이러한 사료용 전용품종을 이용하여 품종이 가지고 있는 생육특성별 단점을 보완한 품종간 혼파 재배기술의 개발을 통한 군락공간의 최대 활용 및 영양가치 등을 고려한 단위면적당 생산량을 최대화하는데 목적이 있다. 영양보리는 직립초형이고 다수성이며, 유연보리는 삼차망이면서 키가 크고, 다미보리는 무엽이 특성이 있고, 우호보리는 포복형이면서 키가 크고 매끈망을 지니고 있다. 소만보리는 숙기가 빠르고, 분얼이 많은 특성이 있다. 2조보리인 호품보리는 청보리에 비해 등숙이 빠르고 분얼이 많은 장점을 가지고 있다. 이러한 각기 다른 특성을 지닌 품종을 이용하여 청보리 최적 혼파 조합을 선발하고자 시험조사한 결과, 영양50+호품50 조합, 유연70+호품30 조합, 다미50+호품50 조합이 가장 좋았고, 이 중 가장 높은 생산성을 보인 조합은 유연70+호품30 조합이었다. 품질특성면에서는 조단백함량이 높고, NDF와 ADF 수치가 낮고, TDN 수치가 높을수록 좋은 품질로 인정받는데 품종간의 조합 중 유연보리와 호품보리, 다미보리와 호품보리 조합이 우수한 성적을 나타냈다.

• Steel and Composite Structures
• /
• 제29권4호
• /
• pp.451-464
• /
• 2018

This paper presents some quasi-static tests for 4 mixed columns composed of CFST column and RC column. The seismic performance and failure mode were studied under low-cyclic revised loading. The failure mode was observed under different axial compression ratios. The hysteretic curve and skeleton curve were obtained. The effects of axial compression ratio on yield mechanism, displacement ductility, energy dissipation, stiffness and strength attenuation were analyzed. The results indicate that the failure behavior of CFST-RC mixed column with archaized style is mainly caused by bending failure and accompanied by some shear failure. The axial compression ratio performs a control function on the yielding order of the upper and lower columns. The yielding mechanism has a great influence on the ductility and energy dissipation capacity of specimens. Based on the experiment, finite element analysis was made to further research the seismic performance by ABAQUS software. The variable parameters were stiffness ratio of upper and lower columns, axial compression ratio, yielding strength of steel tube, concrete strength and rebar ratio. The simulation results show that with the increase of stiffness ratio of the upper and lower columns, the bearing capacity and ductility of specimens can correspondingly increase. As the axial compression ratio increases, the ductility of the specimen decreases gradually. The other three parameters both have positive effect on the bearing capacity but have negative effect on the ductility. The results can provide reference for the design and engineering application of mixed column consisted of CFST-RC in Chinese archaized buildings.

• 한국건축시공학회지
• /
• 제6권3호
• /
• pp.107-114
• /
• 2006

In this study, the experiment was carried out to investigate and analyze the engineering properties of concrete using fine aggregate of PS bal slagl. The main experimental variables were water/cement ratio 30, 40, 50(%), water content $170kg/m^3$, replacement ratio of slag fine aggregate 0, 25, 50, 75(%) in experiment I and water/cement ratio 30, 40, 50(%), water content 165, 170, 175($kg/m^3$), replacement ratio of fine aggregate of PS ball 0, 50 in experiment II. According to the test results, the principle conclusions are summarized as follows (1) The workability of slag fine aggregate-mixed concrete tends to improve, as the replacement rate increases. (2) The air content of slag fine aggregate-mixed concrete tends to decrease, as the replacement rate increases. (3) The unit volume weight of slag fine aggregate-mixed concrete tends to significantly increase, as the replacement rate increases. (4) The compressive strength of slag fine aggregate-mixed concrete tends to show more increasing propensity, in case the curing period is relatively long, as the replacement rate increases.

• 한국가정과학회지
• /
• 제9권3호
• /
• pp.89-98
• /
• 2006

본 연구에서는 대추가루와 설탕의 혼합비율을 달리하여 제조한 설기떡의 일반성분, 수분결합력, 색도, texturometer에 의한 기계적 특성 및 관능검사를 실시한 결과는 다음과 같다. 대추가루와 설탕의 혼합비율을 달리하여 제조한 설기떡의 일반성분 중 대조구의 수분 량은 43.93%로 나타났고 대추가루 혼합비율이 증가할수록 약간 증가하는 경향이었다. 조단백, 조회분 함량은 대조구에 비하여 대추가루 혼합비율이 증가할수록 높아졌다. 설기떡의 수분결합력은 대조구에서 가장 높게 나타났고 대추가루 혼합비율이 많을수록 낮은 것으로 나타났으며 시료간에 유의한 차이가 있었다. 대추가루를 혼합한 설기떡의 색도 L값은 대조구에서 가장 높게 나타났고, a값과 b값은 대조구가 가장 낮게 나타났으며 대추가루 혼합비율이 증가할수록 L값은 낮아지고, a값과 b값은 높게 나타났다. texturometer 측정에 의한 설기떡의 기계적 특성은 대추가루의 혼합비율이 증가할수록 견고성, 탄력성, 응집성, 점착성, 씹힘성은 높게 나타난 반면, 부착성은 낮게 나타났다. 대추가루를 혼합한 설기떡의 관능검사 결과 질감, 입안에서의 느낌, 외형에 대한 기호도가 가장 높게 나타났으며, 색, 향미, 전체적인 선호도에서는 쌀가루 1,000g에 대하여 대추가루 75.0g와 설탕 57.6g을 혼합한 설기떡의 기호도가 가장 높게 나타났다.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.11-20
• /
• 2014

The objective of this study was to investigate the beating properties of two types of cotton pulps such as "cotton lint mixed pulp" and "cotton linter pulp". In order to improve refining characteristics, the effects of carboxymethyl-cellulose (CMC) pre-treatment, mixing ratio changes of cotton lint mixed pulp and cotton linter pulp, and refining load changes were analyzed. In mill application, it was possible to improve the refining characteristics and maintained the strength properties of the paper by applying increasing ratio of cotton linter pulp mixing and controlling the refining methods.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.425-435
• /
• 1997

One-dimensional thermodynamic mixed layer model to stimulate variations of meteorological variables wish the planetary boundary layer has been developed In this study. This model consists of 2 prognostic equations, which can predict the variations of potential temperature and mixing ratio and several diagnostic equations. Physics within the surface and mixed layers has been considered seperately in the model. For the variations of the model, Its result has been analysed and compared with observated data over Ole Dukyang Bay for one day, July 23, 1992. The simulated height of mixed layer is comparable to the observation and the variations of temperature and mixing ratio in the mixed layer are also reasonably simulated. Those Imply that the model responds appropriately with given boundary conditions In sprite of Its simplilfied assumptions applied to the model and insufficient boundary and Initial conditions.

• 한국농공학회지
• /
• 제44권1호
• /
• pp.116-124
• /
• 2002

Natural resources fur the construction materials such as good soil, sand, and coarse aggregates have been encountered to be short due to excessive use by human. Even though some soil has been found to be unsuitable for construction materials, soil with reinforcement can naturally be an answer to these alternatives. According to recently published papers on fiber mixed soil, fiber mixed with soil can improve shear strength, compressive strength and post-peak load strength retention. In this study, a series of tests were performed to clarify the characteristics of fiber mixed soil and to give basic data for design and construction and their engineering properties, that is, unconfined compressive strength, splitting tensile strength, shear strength, crack by drying, freeze-thaw, creep and Poisson\`s ratio, were investigated and analyzed. It has been shown that fiber mixed soil is one of good alternatives fur the civil and building construction materials.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.179-185
• /
• 2009

The esterification of the reactants of Jatropha oil and methanol added by propyleneglycol was done using p-TSA catalyst. And then the emulsification of triglyceride and methanol was conduced by 1.0vol% GMS. The emulsified reactants were transesterified at $65^{\circ}C$ using TMAH and mixed catalyst (50wt%-TMAH+50wt%-NaOH) respectively. The esterification conversion at the 1:8 molar ratio of free fatty acid to methanol using 8.0wt% p-TSA was 94.7% within 80min. The overall conversion at the 1:8 molar ratio of mixed fat(50wt% Beef Tallow) to methanol and $65^{\circ}C$ using mixed catalyst was 95.4% The cloud point of Biodiesel decreased with the addition of petroleum diesel.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.395-405
• /
• 2005

본 논문은 고항복비-고강도강의 효율적인 이용을 위하여 유강혼합구조 시스템의 실험결과를 요약한 것이다. 최근 건축구조물에서도 대형화 및 초고층화 되어감에 따라 사용강재에 대하여 높은 성능을 요구하게 되었고, 고강도강을 사용해야 하는 경우가 늘고 있다. 하지만 고강도강은 항복비가 높고 최대 응력시 변형도가 작고 탄성계수가 연강과 같다는 단점으로 인하여 수요가 증가하고 있지 못한 실정이다. 이러한 고항복비를 가지는 고강도강의 결점을 보완하고 효과적인 사용을 위해서는 새로운 구조시스템이 필요하다. 본 연구에서는 고항복비를 가지는 고강도강을 건축구조물에 효과적으로 적용할 수 있는 방안으로 유강혼합구조 시스템을 제안하고, 고강도강이 포함된 유강혼합기둥 실험을 통하여, 고강도강을 효율적으로 사용할 수 있는 가능성을 제시하고자 하였다. 내력비와 강성비를 포함할 수 있는 강요소 (stiff element)와 유요소 (flexible element)의 항복변형비를 변수로 하여, 유강혼합구조시스템 적용시 적절한 항복변형비를 찾고자 하였다. 실험결과 제안된 유강혼합구조시스템은 연강만으로 이루어진 시스템에 비해 높은 에너지 흡수능력을 보여주었고, 강요소에 대한 유요소의 항복변형비가 2.7~3.3일 때 가장 큰 에너지 흡수능력을 갖는 것을 확인할 수 있었다.