• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.206-211
• /
• 2003

The DC polarograms of some rare earth elements have been investigated in various pH solution and electrolytes. Samarium ion has two well-defined reduction waves at -1.75 V and -1.95 V in 0.1 M NaCl solution and those are a diffusion controlled in nature. Europium and ytterbium ions give also two step reduction waves at -0.75 V and -1.95 V for europium and -1.45 V and -2.00 V for ytterium in $(C_2H_5)_4NCl$ solution. On the other hand, lantanium and neodium ions show a single reduction wave at -1.75 V. The differences of half wave potentials between europium, ytterium and samarium ions make it possible to determine each ions in the mixed solution sponteniously. In case of europium ion, the stability constants for the complexs of $Eu^{3+}$-EDTA and $Eu^{3+}$-DTPA are evaluated.

• Journal of the Korean Chemical Society
• /
• v.14 no.3
• /
• pp.257-261
• /
• 1970

Some factors such as the weight ratio, reaction time and temperature for the separation of rare earth elements from monazite are studied. The influence of the inorganic phosphate for the leaching is also studied.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.1
• /
• pp.8-11
• /
• 2006

The magnetic properties and crystal structures of $Sm_yGd_{2-y}Fe_{17-x}Si_x$ alloys ($0\leq\;x\leq2\;and\;y=0\~1.67$) have been investigated using x-ray diffraction and magnetic measurements. The $Sm_yGd_{2-y}Fe_{17-x}Si_x$ specimens were crystallized to the rhombohedral $Th_2Zn_{17}-structure$ with less than $5mol\%$ of impurities. The unit cells of the mixed rare-earth samples are smaller than those of $Sm_2Fe_{17}\;and\;Gd_2Fe_{17}.$ For example, the $T_c\;of\;SmGdFe_{17}\;(255^{\circ}C)$ is approximately 160 and $800^{\circ}C)$ higher than that of $Sm_2Fe_{17}\;and\;Gd_2Fe_{17},$ respectively. The $T_cs$ measured for $Sm_yGd_{2-y}Fe_{17-x}Si_x$ samples, 280 to $290^{\circ}C)$, are among the highest values observed for a $R_2Fe_{17-x}M_x$ intermetallic where M is a substituent other than cobalt.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.870-877
• /
• 2018

Cyanex 272 shows the highest separation factor for the rare earth elements from hydrochloric acid solution among the organophosporus acidic extractants, D2EHPA and PC 88A. Solvent extraction of Tb(III) from weak hydrochloric acid solution with an initial pH 3 to 6 was compared with Cyanex 272, its mixture with Alamine 336, and ionic liquid with Aliquat 336. The solvent extraction reaction of Tb(III) using Cyanex 272 was the same as that of light rare earth elements. Synergism was observed for the extraction of Tb(III) by the mixture with Alamine 336 when the initial concentration ratio of Cyanex 272 to Alamine 336 was higher than 5. Use of the ionic liquid led to a great increase in the extraction percentage of Tb(III) from the same initial extraction conditions. While the equilibrium pH of the mixture was always lower than the initial pH, under some conditions extraction with the ionic liquid resulted in a higher equilibrium pH than the initial pH. The loading capacity of the mixture and the ionic liquid was the same and 2.6 times larger than that using Cyanex 272 alone. Ionic liquid was recommended as a suitable extractant for the extraction of Tb(III) from hydrochloric acid solution based on the ease of handling and higher extraction percentage.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.11-16
• /
• 2004

In this study, treatment conditions for monazite concentrate in Hong-Cheon area deposit were studied with NaOH fritting decomposition and HCl leaching experiments. At condition of NaOH fritting decomposition, it was appropriate to adopt particle size of -200 mesh monazite, reaction temperature of about $460^{\circ}C$ and NaOH/TREO mole ratio of 6. In case of HCl leaching for decomposed product, it was appropriate to use hydrochloric acid of above 8N with leaching temperature of above $80^{\circ}C$, leaching time of 2 hrs and pulp density of about 10%. A rate of decomposition and leaching for monazite was above 90% under optimum conditions. Sodium phosphate compound was effectively recovered from NaOH decomposed solution, and mixed rare earth chloride solution was prepared with HCl leaching of decomposed product.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.79-87
• /
• 2017

Extraction and separation behaviors of La, Ce, Pr, Nd and Sm from light rare earth multi - component mixed solutions by Cyanex 572 were studied. As extractant concentration increased, the $pH_{50}$ values of all the five components decreased. When extractant concentration was larger than 0.6 M, the separation factor of La and Ce, Nd and Sm was higher than 10, while the separation factor between Ce and Pr, Pr and Nd was as low as 0.5~2.2. Addition of TBP to the 0.6 M Cyanex 572 had little synergistic effect on the phase separation rate and separation factor. From the analysis of experiment results, group separation of [La]/[Pr, Nd, Sm] and [Pr, Nd]/[Sm] could be possible, but in case of the group separation between [La, Ce] and [Pr, Nd] was not available because of the low separation factor between Ce and Pr.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.127-134
• /
• 2002

Analytical method to determine rare earth elements which were extracted to organic phase by inductively coupled plasma mass spectrometry(ICP-MS) was investigated. Organic phase which had extracted rare earth elements was directly aspirated into ICP-MS by ultrasonic nebulizer(USN) in order to reduce solvent load to the plasma. Then, the count rate increased when MIBK(methyl isobutyl ketone) was added to EtOH(ethanol) but decreased when 0.03 M HEH(2-ethylhexyl-2-ethylhexyl phosphonic acid, $P_{507}$, PC88A) was added to solvent which mixed MIBK with EtOH. The optimal temperatures of desolvation system were -10 $^{\circ}C$ for the condenser and 150 $^{\circ}C$ for the heating tube. The optimal nebulizer flow rate which gave maximum count rate and minimum reflect power was 0.7 L/min. The optimal pH and extraction time were 4.3 and 10 min for MIBK-0.03 M HEH system. Detection limits which were obtained through calibration curves at the range of 0.2 ${\sim}$ 20 ng/mL were 0.02 ${\sim}$ 0.05 ng/mL under the optimal experimental conditions.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.145-149
• /
• 2015

The electrochemical behavior of $Nd_2O_3-La_2O_3-NiO$ mixed oxide including rare earth resources has been studied to synthesize $La_{0.5}Nd_{0.5}Ni_5$ alloy in a LiCl molten salt. The $Nd_2O_3-La_2O_3-NiO$ mixed oxide was converted to $NiNd_2O_4$ (spinel) and $LaNiO_3$ (perovskite) structures at a sintering temperature of $1100^{\circ}C$. The spinel and perovskite structures led a speed-up in the electrolytic reduction of the mixed oxide. Various reaction intermediates such as Ni, $NiLa_2O_4$ were observed during the electrochemical reduction by XRD analysis. A possible reaction route to $La_{0.5}Nd_{0.5}Ni_5$ in the LiCl molten salt was proposed based on the analysis result.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.50-56
• /
• 2018

For the purpose of optimizing the counter current extraction process for separation of [Pr, Nd, Sm] group and [La] in mixed solution using Cyanex 572 as an extractant, the theory of Xu Guangxian was derived for calculating the optimized extraction factors. From the basic batch test result, the separation factor was 16.80 at extraction process and 21.48 at scrubbing process, and the loading capacity of 1.0 M Cyanex 572 was 0.12 M of rare earth element. The process parameters such as the stage number at extraction and scrubbing process, the flow rate ratio of feed and solvent solution can be calculated using an equation of optimum extraction ratio proposed by Xu Guangxian. From the result of calculation, 7 extraction stages and 4 scrubbing stages were required for rare earth separation, and the flow rate ratio of feed solution, solvent solution, scrubbing solution was 25 : 5.67 : 12.27.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.131-136
• /
• 2009

Radio frequency (RF) plasma treatment is studied for the size reduction and the spheroidization of coarse particles to change them into nano-sized powders of spherical shape in MLCC fields. The uni-nanoadditives manufactured by RF plasma processing for high dispersion have been investigated for the effect on core-shell structure in dielectrics of MLCC. Microstructures have been characterized using scanning electron microscope (SEM), transmission electron microscope (TEM) and Electron Probe Micro Analyzer (EPMA). We compared the distribution of core-shell grains between specimens manufactured using uni-nanoadditive and using mixed additive. In addition, the uniformity of rare earth elements in the core-shell structured grains was analyzed. It was shown, from TEM observations, that the sintered specimen manufactured using uni-nanoadditives had more dense small grains with well-developed core-shell structure than the specimen using mixed additives, which had a homogeneous microstructure without abnormal grain growth and shows broad temperature coefficient of capacitance (TCC) curves in all temperature ranges because of well dispersed additives.